Scribd
Upload
50 views

How To Setup and Operate A Desktop Projector

The document provides instructions for setting up and operating a desktop projector. It explains that the power cord must be plugged into the back of the projector and an RGB cable must be used to connect the projector to a computer. It also advises using the adjustment feet to level the projector and recommends standing to the left of the screen while presenting to allow the audience to see and to prevent blindness from looking directly at the projector light.

Uploaded by

Sean Mann
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

How To Setup and Operate A Desktop Projector

The document provides instructions for setting up and operating a desktop projector. It explains that the power cord must be plugged into the back of the projector and an RGB cable must be used to connect the projector to a computer. It also advises using the adjustment feet to level the projector and recommends standing to the left of the screen while presenting to allow the audience to see and to prevent blindness from looking directly at the projector light.

Uploaded by

Sean Mann
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

HOW TO SETUP AND OPERATE A DESKTOP PROJECTOR

Written by Sean Mann

INT. Stop! NARRATOR

Man stops suddenly and turns to camera NARRATOR (CONTD) Do you really want to smash that projector? Man shakes head: no NARRATOR (CONTD) Would you rather learn how to use it instead? Man nods: yes Great! NARRATOR (CONTD) NARRATOR (CONTD) CLOSE UP OF PROJECTOR CONTROL PANEL NARRATOR (CONTD) Its important to become familiar with projector controls. Most adjustments can be made from the menu screen CLOSE UP OF INPUT TERMINAL NARRATOR (CONTD) All audio and video input and output ports are located in the input terminal on the rear of the projector INT. Hands shake projector. NARRATOR First, make sure that the projector powers on. INT. Man leans in and plugs in power cord

2. NARRATOR The power cord must be plugged into the AC socket on the back of the projector. INT Man struggles with laptop and projector NARRATOR The projector will not connect to your computer through osmosis or magic or idiocy. INT Close up of RGB cable NARRATOR You will need to use a standard 15pin RGB cable. Connect one end of the RGB cable to INPUT 1, 2, or 3. Connect the other end to your computer or monitor. If you are using and apple or mac product you will need the appropriate adapter. INT. LEVELING THE PROJECTOR Man attempts to hold projector while presenting. NARRATOR Though it may seem like a good idea, do not attempt to hold the projector level while presenting. The beam will not be level and you will most likely look like an imbecile. INT Close up of projector from front side NARRATOR Use the adjustment feet to level the projector. Press foot releases. Adjust height and repeat. Rotate feet to make minor changes

3. PRESENTATION TIPS Man standing in front of an active projector NARRATOR Never stand directly in front of the projector. And never look directly into the light. PRESENTATION TIP 2 NARRATOR Instead stand to left of the screen. This will allow the audience to view your slides and prevent blindness. CREDITS NARRATOR Congratulations you now know how to set up and operate a desktop projector.

You might also like