14N23 M123SP

TCL
SERVICE MANUAL
Chassis M123SP 14N23
1Caution2
2Specification6
3Alignment Procedure 10
4Schematic Diagram 20
5Main IC Introduction21
6PCB Layout37
7Explode View Diagram 38
8BOM list 39
This manual is the latest at the time of printing, and does not
include the modification which may be made after the printing, by
the constant improvement of product
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the product s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN.
2
dangerous
1
3
FOR YOUR PERSONAL SAFETY
1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Save these instructions for later use. Follow all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
IMPORTANT SAFETY INSTRUCTIONS
4
PROTECTION AND LOCATION OF YOUR SET
11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
PROTECTION AND LOCATION OF YOUR SET
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NECSECTION810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s
OPERATION OF YOUR SET
18. This television set should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
IF THE SET DOES NOT OPERATE PROPERLY
21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.
FOR SERVICE AND MODIFICATION
24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.
25. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any service or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.
5
off
Model
Item
Master Data
-Customer ID
-ID
-Destination
-
-Brand
-
-BOM NO.
-BOM
-Assembling Way
- Unit
-Chassis
- M123SP
Reception

-Tuning [Channels Amt.]
- 181
-Tuning [Technology]
- PLL
-Tuning [Indication]
- ---------
-Frequency Bands
- Full-Cable
-IF Frequency
- 45.75MHZ
-TV Systems (Color+ Sound)
-TV (+) PAL-M,PAL-N,NTSC-M(3.58+4.5)
-AV Systems
-AV PAL,NTSC
Picture-Processing

-SCAN
- Standard
-Wide Screen Switching
-
-Comb filter
- X
-Picture Enhancement
-
LTI / CTI
/
Black Stretch
X
Blue Stretch

Dynamic Skin

Others
Blue mute
-Picture Control [General]
- []
Brightness
X
Sharpness
X
Contrast
X
Tint
X
Color
X
-Picture Control [Special]
- []
Smart Pictures * modes
4
VM

Color Temperature
X
Others

-Picture Noise Reduction
-
Picture Display

-CRT Type
-CRT
Normal Flat

Pure Flat
X
Super Flat

-Deflection system
-
1Fh 1Fh X
2Fh 2Fh
-Tube Technology
-(CRT)
Iron

AK
AK
Inver

Black Matrix
(CRT) X
Others

-CRT Deflection ( * Deg.)
-CRT90110... 90 degr
-CRT Magnetic Field
-CRT
-Screen Ratio
- 4:3
-Screen Size / Vis. Size
-/ 21"
Sound

-Audio Power Consumption
- 5W+5W
-Surround Sound
- Stereo wide
-Mono (TV)
-(TV)
-Mono (AV)
-(AV)
-Nicam
-
-America Stereo (MTS,BTSC,MPS)
- X
Chassis: M123SP()
Page: 1 of 7
2Specification
6
SOUTH AMERICA
TCL-Thomson Electronics R D Center (ShenZhen Lab)
Model
Item
-America SAP
-SAP X
-Korea Stereo
-
-Thai Bilingual
-
-Super Woofer
-
-AVL
-
-Sound Control [General]
-
Volume
X
Mute
X
-Sound Control [Special]
-
Treble
X
Bass
X
Balance
X
Equalizer

Smart Sound * modes
4
Others

-Speakers Quantity
- 2
-Speakers Size
-
User Interface

-Menu Language
- English, Portuguese, Spanishfrench
-Features [General]
-
AT

Auto Sleep
(X,)
AV Lock
AV
Biological clock

Calendar
X
Clock
X
Channel Skip

Channel Swap
()
Channel Adjustment
(1)
Channel Naming

Channel Lock

Child Lock
X
Favorite Channel
X
Game
X
Hotel Mode

High Sensitive

Notebook
X
On/Off Timer
/ X
Panel Lock
X
Parent Guide
X
Preset
()
Programe prearrange

Recall
X
Rotation
()
Others

-Features [Special]
-(
V-chip / CCD V-chip / CCD X
Teletext *Pages

FM Radio
FM
Others

Tuning Features

-Auto Channel Program
- X
-Auto/Manual Tuning
- / X
-Auto/Manual Store
- / X
-Fine Tuning
- X
-Factory Mode
- X
-Service Mode
- X
Cabinet

-Cabinet Name
- 21A71
-Front Cabinet Color
-
-Middle Cabinet Color
-
-Rear Cabinet Color
-
Chassis: M123SP()
Page: 2 of 7
7
Model
Item
-Number of Local Control(incl.Mains)

-() 7
-Number of Indicator Control(incl.Mains)
-() 1
Local Controls Front
-
-Mains Switch
X
-CH+ CH- VOL+ VOL-
+-+-
-TV/AV TV / AV
-Menu

-Auto Search

Local Controls Top
-
-CH+ CH- VOL+ VOL-
+-+- X
-TV/AV TV / AV X
-Menu
X
-Auto Search

Local Controls Side
-
-CH+ CH- VOL+ VOL-
+-+-
-TV/AV TV / AV
-Menu

-Auto Search

Indicator
-
-RC Received LED

-Color of RC Received LED

-Standby LED
X
-Color of Standby LED
RED
Remote Controller

-Type
- R
-Batteries Type
- 2XAA
Connectors Rear

-SCART Full (RGB) w/o Y/C
Y/CSCART
-SCART Full with Y/C
Y/CSCART
-SCART Single (CVBS)
-SCART(CVBS)
-Component In (YCbCr) Cinch YUV X
-In Y/C+Cinch(CVBS+ Stereo) -In Y/C+Cinch(CVBS+ Stereo)
X
-In Y/C+Cinch (CVBS+ Mono) -In Y/C+Cinch (CVBS+ Mono)
-In Cinch(CVBS+ Stereo) -In Cinch(CVBS+ Stereo) X
-In Cinch (CVBS+ Mono) -In Cinch (CVBS+ Mono)
-Out Cinch(CVBS+ Stereo) -Out Cinch(CVBS+ Stereo) X
-Out Cinch(CVBS+ Mono) -Out Cinch(CVBS+ Mono)
-Super Woofer
-
-Digital Audio Out
-
-Loudspeakers
-
-Control Busses
-
-After Service Slot
-
-ITV Smart Port
-ITV
- Antenna in
-
75 Ohms (IEC Type)
75 ohms (IEC X
Connectors Front

-In Cinch(CVBS+ Stereo) -In Cinch(CVBS+ Stereo)
-Out Headphone
-
Mini-Jack 3.5mm
3.5mm
Connectors Side

-In Cinch(CVBS+ Stereo) -In Cinch(CVBS+ Stereo)
X
-Out Headphone
-
Mini-Jack 3.5mm
3.5mm
Final Equipment

-Packing Methods
-
* Colors Printing

Chassis: M123SP()
Page: 3 of 7
8
Model
Item
Carton Color

-Documents and Manuals
-
Instruction Book
X
Screen Sticker

Plastic Bag

Warranty Card

Guarantee Doc.

Warning Label
X
Approbation Label

Others

-Languages Instruction Book
- English
-Indication on BACKOVER
-
Made-in in family sheet
X
FCC/Elect Shock Caution Label
FCC/ Elect
CE/Elect Shock Caution Label
CE/ Elect
Warning Label

Others

Approbation

FCC FCC
FDA FDA
UL/CUL UL/CUL
CB CB X
VDE VDE
Others Others
Miscellaneous

-Mains Voltage
- 100v-240v
-Mains Frequency
- 50/60Hz
-Type Mains Cord
-
-Type Mains plug
-
-Power Consumption TV in ON
- Less than 80W
-Power Consumption TV in Standby
- Less than 3W
Chassis: M123SP()
Page: 4 of 7
9
Chassis Name M123SP Serial No.
Issued on 2006-04-29 Page 4 of 13
Updated on 2006-07-29 Version 2.0
Table of Content
. SUMMARIZE........................................................................................................................... 5
. ALIGNMENT CONTENTS................................................................................................ 6
1. ADJUSTMENT OF B+ VOLTAGE................................................................................................ 6
2. RFAGC ADJUSTMENT............................................................................................................ 6
3. SCREEN &FOCUS VOLTAGE ADJUSTMENT.............................................................................. 7
4. 1 ADJUSTMENT OF SUB-CONTRAST, SUB-TINT AND SUB-COLOR FOR NSTC AND PAL SIGNAL
4. 2 WHITE BALANCE ADJUSTMENT (NORMAL) ................................................................... 8
5. ADJUSTMENT OF SUB-BRIGHTNESS ........................................................................................ 8
6. PICTURE GEOMETRIC ADJUSTMENT ........................................................................................ 8
7.X RAYS OVER VOLTAGE PROTECTING CIRCUIT TEST : .............................................................. 8
8. PS LINE POLARTITIES TEST : ................................................................................................... 9
9.PS POWER TEST (RANDOM TEST) :........................................................................................... 9
10. HIGH VOLTAGE AND IB VALUE LIMIT TEST( RANDOM TEST ) ............................................... 10
11.HEATER VOLTAGE TEST ( RANDOM TEST )............................................................................ 10
12. CCD AND VOL-CHIP FUNCTION TEST............................................................................... 10
13. INITIALIZATION .................................................................................................................. 10
14.EEPROMDATA............................................................................................................. 10
3Alignment Procedure
10
TCL-THOMSON Electronics R&D Center (ShenZhen Lab)
M123SP Alignment Procedure
. Summarize
M123SPis NTSC-PAL system model developed for TCL market specially. In trial run,
burn the software to TMPA8873PSNG IC by OTP method. After the trial run, make the
maskplease take care in production. To solve the probable problems in production, for the
workers participate in alignment, please be familiar with the Alignment Procedure, and be
master of the features.
There are 2 operation modesuser mode and factory mode. You can use the Remote
control or buttons on the panel to operate in user mode, but only Remote control works in
factory mode.
The way to enter factory modePress D-MODEbutton on RC pressOKand
CH+ CH-to select the parameter you want to adjust. PressVOL+ VOL- to
change the parameters. To quit factory modepressD-MODE buttonon the right of
SURR buttonthe factory data changed will be memorized.
A few special modes
Aging mode = used before the aging before alignment. The aging could start in
factory mode.
Vertical stop mode=used to confirm the screen voltage. Press INPUTbutton in
factory mode to enter Vertical stop mode. Then press INPUT
button again to exit.
White balance alignment mode=used for white balance auto alignment. PressBUS
OFF button near the left of MTS button to enter White balance
alignment mode.
Factory mode=. Press SOUND button in factory mode to initialize the set. The
screen displaysWAIT after the initializationthe screen
displays OKand exit the Factory mode automatically.
Then press D-MODEbutton againit will not enable you to enter Factory mode if you
want to enter againyou need operate as followsturn down the volume to 0 press Volume
downbutton on the panelpressINFObutton on the RC meantime.
11
. Alignment contents
1. Adjustment of B+ voltage
Receive Philips standard testing pattern to RF input.
If the VR800 exists in the board, adjust it in STANDARD mode until voltage at following
value
Model B+ (v)
M123SP 1102.0
21E10 1102.0
2. RF AGC adjustment
AGC Alignment Procedures:
1)
Apply 8-scale gray signal (80dB), then adjust AGC data in D-mode to get the noise
picture ( snow picture) disappear exactly. Test Pin 1 of TU101 (IF output) and
record the voltage value as V1
P-P.
<Illustrate as Picture A>
2) Apply 8-scale gray signal (80dB), and then adjust AGC data in D-mode until the
synchronization signal distortion appear exactly. Test Pin 1 of TU101 (IF output)
and record the voltage value as V2
P-P.
<Illustrate as Picture A>
3) Calculate the value of V
P-P
with the formula: V
P-P
(V2
P-P
V1
P-P
)

1/2
Apply 8-scale gray signal (80dB), test Pin 1 of TU101 (IF output), adjust AGC data
until the voltage of Pin 1 of TU101 V
P-P
(V2
P-P
V1
P-P
)

1/2

4) Test three units according to 1)2)3) steps, and record the values of AGC in three
units. Take the average value as benchmark.
Remarks:
Comparing test is necessary due to different probe of Oscilloscope and different Test
Circuit (Picture A).
1) AGC voltage value should be tested afresh, due to the type/supplier of Tuner
or Saw filter changed, or other related components changed.
IN60
3Pf
output
ùput
100K IN60

(Picture A)
12
3. Screen & Focus voltage adjustment
Apply pattern signal in normal status, enter Factory modepressINPUT button
to stop vertical scan. Note(the RC/GC/BC is preset to be 40GD/BD is 40
Adjust the SCRREEN switch on the flyback transformer to make a horizontal shining
line just visible on the screen.
Turn on the vertical output, adjust the FOCUS on the flyback transformer to obtain the
optimum focus.

4. 1 Adjustment of Sub-contrast, Sub-tint and Sub-color for NSTC and PAL signal
(NORMAL)(Press KEY 5 in D-Mode)
1. connect the probe of Oscilloscope to the conjunction between R201 and P201 (B-out).
2. Apply the Grey-scale/Color-bar (NTSC signal) to the AV\TV input, in STANDARD status.
3. Select CNTC to adjust the contrast, until that the amplitude A is 2.0V
P-P
as shown below.
4. Select COLC to adjust the color by tuning the amplitude of a and d to the same.
5. Select TNTCV\T to adjust the tint by tuning the amplitude of b and c to the same.
6. Apply the Grey-scale/Color-bar (PAL signal) to the AV input, in STANDARD status.
7. Select COLP to adjust the sub-color by tuning the amplitude of a, b, c and d to the
same.
4.2 White balance adjustment (NORMAL)
1) Apply the black and white pattern in normal status;
2) Alignment of normal color temperature
Change Color Temperature to normal status
Use a color analyzer to measure the black side of the screen. By changing the value
of RC, GC and BC, set the reading of the color analyzer to standard, x=285+8,
y=294+8.
Use a color analyzer to measure the white side of the screen. By changing the value
of GD, BD, set the reading of the color analyzer to standard, x=285+8, y=294+8.
Separately set the brightness and contrast from min. to max., repeat the step 2 and 3
until the reading of the color analyzer is correct.
Note: Provided the production line is equipped with the self- White balance adjusting
A
a b c
d
13
equipment, white balance can be adjusted automatically as following: Press BUS OFF
button under factory mode, the TV set will adjust automatically.
standard
Warm X=310+8, Y=314+8
Cool X=278+8, Y=282+8
Remark:
1) Provided the production line is equipped with the self- White balance adjusting
equipment, white balance of M123SP chassis can be adjusted automatically as following:
Press I2C BUS button under factory mode, the TV set will adjust automatically.
2) Free-alignment of warm and cool temperature by presetting the value of RC-W,
GC-W, BC-W, GD-W, BD-W (for warm temperature) / RC-C,GC-C,BC-C,GD-C,BD-C(for
cool temperature ) into memory
5. Adjustment of Sub-brightness
Apply the Grey-scale/Color bar (NTSC signal) to the AV input, in normal status. Enter
factory alignment menu 8, Select BRTS to adjust the sub-brightness, until that the 2
nd
dark
bar of 8 level Grey scale just can be seen.
6. picture geometric adjustment
1. Apply the Philips standard testing pattern NTSC (PAL-N) in normal status, then
enter menu 3, adjusting the following data to get the min-distortion.
HPOS6(HPOS5)Horizontal Center
2. Apply the Philips standard testing pattern in normal status, then enter menu 2,
adjusting the following data to get the min-distortion.
HIGH6 (HIGH5) (Height)
VLIN6VLIN5(Linearity
VSC6VSC5(Vertical-S Correction
VCEN6VCEN5(Vertical Center

7.X rays over voltage protecting circuit test :
TV enter working modeapply more than 26V DC voltage between two ends of C431
the set should enter protecting modeor check X rays protecting circuit.
14
8. PS line polartities test :
Connect follow the graphic below

DX 2.2k

PS socket M
TO F801

Plug the PS line onto the PS socket M, then touch any pin of F801 with the probe, the LED
DX will shine at the moment, with sound reminder, or it is disqualification.
9.PS power test (Random test) :
Instruments Power meter.
Input signal pattern Color barSound 1KHZ 100% modulation.
Input signal intensity 60dBuv (1 Mv rms)
Test points find the graphic below
Test means Set the Brightness, CR to the highest, adjust the volume to make
the sound output to be 0.5W. Connect the power meter to test the
power consumption. Transfer the set to be standby, and test the
power consumption at the moment, which should meet the
requirements below
Model Power Standby power (110V220V)
M123SP 80W <3W
M123SP 80W <3W

DC PS
9V
- +
Sound reminder
15
10. High voltage and Ib value limit test( random test )
Instruments High voltage meter Ib meter.
Input signal pattern White vertical
Input signal intensity 60dBuv (1 Mv rms)
Test meansConnect High voltage meter and Ib meter. Test voltage of different
Ib separately, It should meet the requirements below
Anode high voltage (Kv)
21 Model Ib, Ib scope
Value Diff.
Ib=50A
Scope:
50A&1200A 28.02.5 <2
11.Heater voltage test ( random test )
Instruments RMS voltage meter
Input signal pattern Philips test graphic
Input signal intensity 1 mVrms60dBuVto 50 mVrms
Connect the RMS voltage meter to the 2 ends of CRT glowerstest the heater voltage of
highest CR and Brightness, It should meet6.30.3Vrms
12. CCD and VOL-CHIP function test
VOL-CHIP and CCD function testplease find the service manual in detail.
13. Initialization
Under the factory modepressSOUNDbuttonthe screen displaysWAIT,
when the screen displays OK, the initialization finished. You can enter the next
working procedure.
14.EEPROM DATA
Notethe items with * are adjustablethe items with BLUE COLOR are work in CRT
parameter other items are not pls do not adjust them
Use TMPA8873*SANG(13-PA8873-PSP),D-Mode\ G2_FLAG04 posit 00
Use TMPA8873*SBNG(13-PA8873-PSPB),D-Mode\ G2_FLAG04 posit 40
FAC 01 Data
Model
RC* GC* BC* GD* BD*
M123SP 40 40 40 40 40
20E10 40 40 40 40 40

FAC 02 Data
Model
HIGH6* VP60 VLIN6* VSC6* VBLK6 VCEN6*
M123SP 26 00 0E 19 00 2A
20E10 26 00 10 17 00 21
HIGH5* VP50 VLIN5* VSC5* VBLK5 VCEN5*
M123SP 26 06 0B 17 00 2D
20E10 24 06 0B 16 00 24

16

FAC 04 Data
Model CNTX CNTN BRTX BRTN COLX COLN TNTX TNTN
M123SP 7F 10 20 1B 7F 0E 2C 30
20E10 7F 10 20 1B 7F 0E 2C 30
FAC 05 Data
Model BRTC COLC COLP SCOL SCNT CNTC TNTCT TNTCV
M123SP 48 37 00 07 0F 36 45 3D
20E10 48 37 00 07 0F 45 45 3D
FAC 06 Data
Model ST3 SV3 SV4 SVD ASSH SHPX SHPN
M123SP 1B 1B 1B 1B 07 1A 1A
20E10 1B 1B 1B 1B 07 1A 1A
FAC 07 Data
Model MOD1 MOD2 MOD3 OPT OPTM1 OPTM2 HDCNT HSTOP
M123SP 60 F3 88 37 C2 83 09 FF
20E10 60 F1 88 37 C2 83 09 FF
FAC 08 Data
Model RFAGC* BRTS* OSD OSDF CCD OSDCCD OSDF TXCN RGCN
M123SP 25 00 21 53 4A 65 10 09
20E10 25 00 21 53 4A 65 10 09
FAC 09 Data
Model V01 V05 V10 V25 V50 V75 V90 V100 VOLMAX
M123SP 38 41 48 59 65 6A 6D 70 32
20E10 38 41 4B 63 6D D73 75 78 32

FAC 03
Data
Model
HPOS6* HPOS5*
U
BLACK*
V
BLACK* STRAP F0 SIF FREQ
STRAP
HL QG PIF FREQ
M123SP 11 0D 08 08 08 06 00 02
20E10 11 0D 08 08 08 06 00 02
17
FAC 10 Data
Model CURTCEN VOLX PWTM MODE4 MODE5 MODE6 MODE7 MODE8 MODE9
M123SP A5 7F 08 FF 7F 61 D7 2D CA
20E10 A5 7F 08 FF 7F 61 D7 2D CA
FAC 11 Data
Model CON1 CON2 CON3 STSADJ ALI 1 ALI 2 ALI3
M123SP 06 06 02 00 0A 0A 03
20E10 06 06 02 00 0A 0A 03
FAC 12 Data
Model SVM SVM1 OSD2 OSDF2 PYNX PYNN PYXS PYNS
M123SP 10 10 20 64 28 18 22 10
20E10 10 10 20 64 28 18 22 10
FAC 13 Data
Model CLTM CLVO CLVS ABL DCBS FLG0 FLG1
M123SP 04 03 03 27 14 82 0C
20E10 04 03 03 27 14 82 0C
FAC 14 Data
Model HAFC AGCC NOIS ONTM NSHP PVLVL PLMT
M123SP 09 1C 01 08 1A 80 80
20E10 09 1C 01 08 1A 80 80
FAC 15 Data
Model RC-C GC-C BC-C GD-C BD-C YUV-RC YUV-RC YUV-RC
M123SP 10 0D 06 01 10 00 00 00
20E10 -- -- -- -- -- -- -- --
FAC 16 Data
Model RC-W GC-W BC-W GD-W BD-W YUV-RC YUV-RC
M123SP 10 08 0D F3 E3 00 00
20E10 -- -- -- -- -- -- --
FAC 17 Data
Model D-COL D-BRI D-CON D-SHP
M123SP 32 32 5A 32
20E10 32 32 5A 32
18
FAC 21 Data
Model THEATER-BAS THEATER-TRECONCERT-BASCONCERT-TRE BROCAST-BAS BROCAST-TRE
M123SP 2D 4A 38 3E 19 2C
20E10 2D 4A 38 3E 19 2C

FAC 22 Data
Model VOL_MAI GATE VOL-OUT AV GAIN OPTM3
M123SP 03 2A 75 2D 40
20E10 03 2A 75 2D 40

FAC 25 Data
Model
G2_FLAG00 G2_FLAG01 G2_FLAG02 G2_FLAG03 G2_FLAG04 G2_FLAG05
M123SP 30 06 00 02 40 00
20E10 30 06 00 02 40 00
FAC 18 FAC 19 Data
Model
S-COL S-BRI S-CON S-SHP M-COL M-BRI M-CON M-SHP
M123SP 32 32 32 32 32 32 1E 32
20E10 32 32 32 32 32 32 1E 32
FAC 20 Data
Model SEG-POINT1 SEG-POINT2 DATA-VLDATA-VHDATA-UF SPE-POS1 SPE-DATA1 SENSI-ONSENSI-OFF
M123SP 173 407 01 02 08 06 05 00 00
20E10 173 407 01 02 08 06 05 00 00
19
2005/03/29 21
TOSHIBA Integrated Circuit
TMPA8873PSNG
TMPA8873CMNG /CPNG /CRNG /CSNG
MCU and Signal Processor for a PAL/NTSC TV
The TMPA8873CPNG is an integrated circuit for a PAL/NTSC
TV. A MCU and a TV signal processor are integrated in a 64-pin
shrink DIP package. The MCU contains 8-bit CPU, ROM, RAM,
I/O ports, timer/counters, A/D converters, an on-screen display
controller, remote control interfaces, IIC bus interfaces and the
Closed Caption decoder. The TV signal processor contains PIF, SIF,
Video, multi-standard chroma, Sync, RGB processors.
Mask ROM: TMPA8873CMNG (ROM size: 32k)
Mask ROM: TMPA8873CPNG (ROM size: 48k)
Mask ROM: TMPA8873CRNG (ROM size: 56k)
Mask ROM: TMPA8873CSNG (ROM size: 64k)
OTP ROM: TMPA8873PSNG (ROM size: 64k)
Weight: 8.85 g (typ.)
5IC Brief Introduction
Confidential TMPA8873PSNG /CMNG /CPNG /CRNG /CSNG
2005/03/29 22
Features
MCU
High speed 8-bit CPU (TLCS-870/X series)
Instruction execution time: 0.5 s (at 8 MHz)
(TMPA8873CPNG)
48-Kbytes ROM, 2-Kbytes RAM
ROM correction
12 I/O ports
14-bit PWM output 1 ch for a voltage synthesizer
7-bit PWM output 1 channel
8-bit A/D converter 3 ch for a touch-key input with
key ON wake-up CIRCUIT
Remote control signal preprocessor
Two 16-bit internal timer/counter 2 ch
Two 8-bit internal timer/counter 2 ch
Time base timer, watchdog timer
16 interrupt sources: external 5, internal 11
IIC bus interface (multi-master)
STOP and IDLE power saving modes
CCD Decoder
Digital data slicer for NTSC
OSD
Clock generation for OSD display
Font ROM characters: 384 characters
Characters display: 32 columns 12 lines
Composition: 16 18 dots
Size of character: 3 (line by line)
Color of character: 8 (character by character)
Display position: H 256/V 512 steps
BOX function
Fringing, smoothing, Italic, underline function
Conform to CCD REGULATION
Jitter elimination
TV Processor
IF
Integrated PIF VCO aligned automatically
Negative demodulation PIF
Multi-frequency SIF demodulator without external
Tank-coil
SIF BPF built-in
SIF Trap filter built in
Video
Integrated chroma traps
Black stretch
Y-gamma
Chroma
Integrated chroma BPFs
PAL/NTSC demodulation
RGB/Base-Band
Integrated 1 H base-band delay line
Base-band TINT control
Internal OSD interface
Half-tone and transparent for OSD
External YCbCr interface for DVD
RGB cut-off/drive controls by bus
ABCL (ABL and ACL combined)
Sync.
Integrated fH 640 VCO
DC coupled vertical ramp output (single)
Sync output
AV Switch
2 for video
2 for audio(mono)
or 1 for audio (Stereo, 2ch ATT), controlled by IIC bus
ALC (Auto-Audio Level Control)
2005/03/29 33
Block Diagram
EXT AU 1
+
P56
P51/SCL
P53/ADC8bit/TC1/Int2
I
F

I
N
S
A
W
P31/Int4/TC3
P52/SDA
AU out 1
V2 CVBS/Y
Cr input
Y input
Cb input
APC Fil
PIF PLL
+
IF AGC
+
Black Det
FBP
SCP
TV DEF GND
P61/LED1/ADC8bit P63/LED2
+
RF AGC
P60/ADC8bit P30/Int3/RXIN
Hout
TV Dig GND
Vout
Bout
Gout
Rout
Cin
Vsaw
HAFC 1
+
Monitor /VM out
V1 IN 1Vpp
TVout 2Vpp
DC NF
+
H.correction
/2nd SIF in
+
DVcc
ABCL
IF GND
S-Reg.F
+
EXT AU 2
+
uP VVss
TEST
uP DVss
uP AVdd 5V
+
uP MPAGND
+
uP DVDD 5V
1
7
6
5
4
3
2
8
1
4
1
3
1
2
1
1
1
0
9
1
5
2
1
2
0
1
9
1
8
1
7
1
6
2
2
2
8
2
7
2
6
2
5
2
4
2
3
3
2
3
1
3
0
2
9
5
6
5
0
5
2
5
3
5
4
5
5
4
9
4
3
4
4
4
5
4
6
4
7
4
8
4
2
3
6
3
7
3
8
3
9
4
0
4
1
3
5
3
3
3
4
6
4
5
8
5
9
6
0
6
1
6
2
6
3
5
7
5
1
8
M
H
z
IF Vcc 5V
+
H/Lout / SIF out
Sync out / H/L out
AU Monitor out
ALC filter
A Vcc 8V
YC Vcc 5V
AU out 2
P20/Int5/Stop
P40/PWM14bit Reset
P50/PWM7bit/TC2/Int0
TV AGND
+
+
+
-
6
d
B
+
+
+
P
I
F

P
r
o
c
.

P
A
L
/

N
T
S
C

d
e
m
o
d

A
u
t
o
.
V
C
O

a
l
i
g
n
m
e
n
t
V
e
r
t
.
P
r
o
c
.

V
.
C
/
D

V
.
r
a
m
p

V
.
g
e
o
m
e
t
r
y

V
.
D
r
i
v
e
C
h
r
o
m
a

P
r
o
c
.

C
-
B
P
F

P
A
L
/
N
T
S
C
H
o
r
.
P
r
o
c
.

S
y
n
c
.
s
e
p
a

H
o
r
.
V
C
O

H
A
F
C
-
1

H
A
F
C
-
2

H
-
s
h
i
f
t
C
u
t
-
o
f
f
D
r
i
v
e
R
G
B

s
w
i
t
c
h

B
r
i
g
h
t
n
e
s
s

H
a
l
f
-
t
o
n
e

T
r
a
n
s
p
a
r
e
n
t
X
O

8
7
0
X

C
P
U

c
o
r
e

S
T
O
P
/
I
D
L
E

m
o
d
e
I
/
O

1
0

I
/
O

p
o
r
t

1
4
-
b
i
t

P
W
M

x
1

7
-
b
i
t

P
W
M

x
1

8
-
b
i
t

A
D
C

E
x
t
.
x
3

I
n
t
.
x
1

R
o
m
o
t
e

p
r
e
p
r
o
c
e
s
s
o
r

1
6
-
b
i
t

i
n
t
.
t
i
m
e
r

x
2

8
-
b
i
t

i
n
t
.
t
i
m
e
r

x
2

W
a
t
c
h
d
o
g

t
i
m
e
r

I
n
t
e
r
r
u
p
t

E
x
t
.
x
5

I
n
t
.
x
1
1

I
I
C

b
u
s

i
n
t
e
r
f
e
c
e

E
x
t
.
x
1

I
n
t
.
x
1
A
F
T
O
S
D

R
/
G
/
B
/
Y
s
/
I

F
o
n
t
:
1
6

x

1
8

D
i
s
p
l
a
y
:
3
2
C

x

1
2
L

C
o
l
o
r
:
8

C
h
a
r
a
c
t
e
r
:
3
8
4

H
a
l
f
-
t
o
n
e

T
r
a
n
s
p
a
r
e
n
t
C
C
D
Y

P
r
o
c
.

C
-
T
r
a
p

B
l
a
c
k

s
t
r
e
t
c
h

Y

g
a
m
m
a

S
h
a
r
p
n
e
s
s
B
a
s
e

B
a
n
d

P
r
o
c
.

T
I
N
T

1
H

D
L

I
n
t
/
E
x
t

s
w
i
t
c
h

C
o
l
o
r

U
n
i
-
c
o
l
o
r

R
G
B

M
a
t
r
i
x

R
O
M
:
k
B

R
A
M
:
2
k
B

R
O
M

c
o
r
r
e
c
t
i
o
n
S
o
u
n
d
T
R
A
P
I
F
A
G
C
A
G
C
D
E
T
R
e
g
.
F
M
D
E
M
O
D
e
-
e
m
p
(
o
n
/
o
f
f
)
A
L
C
B
P
F
S
W
V
M
A
T
T
A
T
T
+
2005/03/29 24
Basic Structure
1. Internal Connections
TMPA8873 has two pieces of IC chip in one package, using Multi-Chip-Package (MCP) technology. One is a
micro controller (MCU) and the other one is a signal processor (SP) for a color TV. There are some internal
connections between these two ICs for handling below signals.
Signal Name Direction Description
1 SCL M to S Internal IIC bus SCL
2 SDA Bi-direction Internal IIC bus SDA
3 OSD R M to S OSD signal connection
4 OSD G M to S OSD signal connection
5 OSD B M to S OSD signal connection
6 OSD Y/BL M to S OSD display control
7 OSD I, CS OUT M to S OSD half-tone control/Test pattern signal
8 C-Video S to M Composite video signal from internal video switch, for CCD
9 C-Sync S to M Composite sync. signal from sync. Separator, for CCD
10 HD S to M Horizontal timing pulse regenerated from FBP, for OSD
11 VD S to M Vertical timing pulse from sync. Separator, for OSD
12 CLK M to S 8 MHz clock
13 AV
DD
M to S Reference voltage for C-Video interface
14 ADC S to M A/D converter monitoring RF-AGC, R-Y and B-Y
Functions of SP from MCU are controllable through the IIC bus of the internal connections.
2. Power Supply
TMPA8873 has some power supplies and GND pins. Power supplies related MCU must be applied at the
first. Power supplies for H.V
CC and TV D.VCC are the second with at least 100 ms delay after MCU power ON.
The other power supplies are the last, which are recommended to be supplied from a regulator circuit using
FBP.
3. Crystal Resonator
TMPA8873 requires only one crystal resonator, in stead that a conventional two-chip solution requires two
resonators at least, one for MCU and the other one for SP. An oscillation clock with the crystal resonator of
TMPA8873 is supplied for MCU operation, PIF VCO automatic alignment, alignment free AFT, chroma
demodulation and horizontal oscillation. The oscillation frequency is very important so that those of functions
work properly, so that designing the oscillation frequency accurately is required. The spec of crystal is
recommended to be within
f
osc
: 8 MHz +/20 ppm
ftemp: 8 MHz +/40 ppm (20C to +65C)
While RESET of MCU is active, the MCU function stops. Hardware and software initialization sequence
including power supplies control is required, because status of any hardware after the RESET period is
unknown especially horizontal oscillator which is a very basic timing generator of SP operation.
2005/03/29 25
TERMINAL INTERFACE
MCU BLOCK
Pin
No.
Pin Name I/O Function Interface Circuit
1
P61
(/KWU5)
(AIN5)
(LED1)
I/O
(Input)
(Input)
(Output)
Key on wake up input
A/D converter analog input
LED output
1
9
4
1
k
5k
Key-on
Wake-up
2
2
p
C
Disable
Initial"Hi-Z"
2
P60
(/KWU4)
(AIN4)
I/O
(Input)
(Input)
2
9
4
1
k
5k
Key-on
Wake-up
2
2
p
C
Disable
Initial"Hi-Z"
3
P53
(/KWU0)
(AIN0)
(TC1)
(INT2)
(SCK1)
I/O
(Input)
(Input)
(Input)
(Input)
(I/O)
Timer/counter input
External interrupt input
SIO serial clock input / output
3
9
4
1
k
5k
Key-on
Wake-up
2
2
p
C
Disable
Initial"Hi-Z"
4 up DVss
Power
Supply
GND
5 Reset I/O
Reset signal input or watchdog
timer output
Address trap reset output
System clock reset output
5
9
4
2
2
0
k
1k
2005/03/29 26
Pin
No.
6
7
Xout
Xin
Output
Input
Xtal connecting pins
6
7
9
4
Osc.enable
1.2M
500
fc
8 TEST Input Test pin for out-going test 8
9
4
1k
9 up DVdd
Power
Supply
Vdd
Supply 5V
-
9
CPU core
Digtal curcuit
Slicer
10 up VVss
Power
Supply
GND for Slicer circuit
54 up AGND
Power
Supply
GND for Oscillator circuit
55 up AVdd
Power
Supply
Vdd for Oscillator circuit
Supply 5V

56 P56 I/O 56
9
4
1
k
5k
Key-on
Wake-up
2
2
p
C
Disable
Initial"Hi-Z"
57
P52
(SDA)
(SO1)
I/O
(I/O)
(Output)
IIC bus serial data input / output
SIO serial data output
57
9
4
1
k
Disable
Initial"Hi-Z"
Open drain
output enable
2005/03/29 27
Pin
No.
58
P51
(SCL)
(SI1)
I/O
(I/O)
(Input)
IIC bus serial clock input / output
SIO serial data input
58
9
4
1
k
Disable
Initial"Hi-Z"
Open drain
output enable
59
P50
(/PWM8)
(TC2)
(INT0)
I/O
(Output)
(Input)
(Input)
7-bit D/A conversion (PWM)
output
Timer/Counter input
59
9
4
1
k
Disable
Initial"Hi-Z"
60
P40
(/PWM0)
I/O
(Output)
14/12-bit D/A conversion (PWM)
output
60
9
4
1
k
Disable
Initial"Hi-Z"
61
P20
(/INT5)
(/STOP)
I/O
(Input)
(Input)
STOP mode release signal input
61
9
4
1
k
62
P31
(INT4)
(TC3)
I/O
(Input)
(Input)
Timer/Counter input
62
9
4
1
k
Disable
Initial"Hi-Z"
2005/03/29 28
Pin
No.
63
P30
(INT3)
(RXIN)
I/O
(Input)
(Input)
Remote control signal
preprocessor input
63
9
4
1
k
Disable
Initial"Hi-Z"
64
P63
(LED2)
I/O
(Output) LED output
64
9
4
1
k
Disable
Initial"Hi-Z"
2005/03/29 29
SIGNAL PROCESSOR BLOCK
Pin
No.
Pin Name Function Interface Circuit I/O Signal
11
TV DEF
AGND
GND terminal for TV DEF
block.

12 FBP in Input terminal for FBP.
17
11
12
200 10k
13 H out
Output terminal for
Horizontal driving pulse.
11
17
13
50
14 HAFC 1
Terminal to be connected
capacitor for H AFC filter.
This terminal voltage
controls H VCO frequency.
100
300
14
17
11
33k
15 V saw
capacitor to generate V saw
signal.
V saw amplitude is kept
constant by V AGC
function.
15
17
11
6k 1
k
5k
16 V out
Output terminal for Vertical
driving pulse.
16
17
11
7.5k
2
0
0
200
17 AVcc 8V
Vcc terminal for DEF, RGB,
Audio out and PIF out
circuit.
Supply 8V.

18 TV A GND GND terminal for TV block.
19 Cb in Input terminal for Cb signal.
5k
5k
47
19
18
2005/03/29 30
Pin
No.
20 Y in Input terminal for Y signal.
20
47
18
11k
1.5k
1.5k
21 Cr in Input terminal for Cr signal.
5k
5k
47
21
18
22 Ext Au1
Input terminal for Audio
signal 1.
17
22
18
3
5
k
35k
5
k
2
0
0
23 C in
Input terminal for Chroma
signal.
23
47
18
1.5k
4
0
k
24 V2 in
Input terminal for Video
signal.
24
47
18
11k
1.5k
1.5k
25 ALC filter
capacitor for ALC (Audio
Level Control).
25
17
18
200 5k
26 V1 in
Input terminal for Video
signal.
(Input level = 1 Vp-p)
26
47
18
11k
1.5k
1.5k
27 ABCL
Input terminal for ABL/ACL
control.
3
1
k
2k
47
18
27
2005/03/29 31
Pin
No.
28 Au out 1
Output terminal 1 for Audio
signal.
17
18
28
29 Au out 2
Output terminal 2 for Audio
signal.
17
40
29
30 TV out
Output terminal for detected
PIF signal.
17
18
30
31
1bit DAC
/SIF out
Output terminal for 1bit
DAC or detected SIF signal.
36
40
31
32 Ext Au2 in
Input terminal for Audio
signal 1.
17
32
18
3
5
k
35k
5
k
2
0
0
33
H correc /
SIF in
Input terminal for H
correction and 2nd SIF.
33
36
40
500
70k
3
0
p
F
3
0
k
6pF
3
0
k
34 DC NF
capacitor for DC Negative
Feedback from SIF Det
output.
34
17
18
500
2
0
k
2k
3k
35 PIF PLL
with loop filter for PIF PLL.
This terminal voltage is
controlled PIF VCO
frequency.
2k 15k 500
35
36
40
4
k
36 IF Vcc 5V
Vcc terminal for IF circuit.
Supply 5V.

2005/03/29 32
Pin
No.
37 Reg Fil
capacitor for stabilizing
internal bias.
37
17
18
5k
5k
38
AUDIO
Monitor out
Output terminal for External
audio signal or TV audio
signal selected by BUS
(Audio SW).
17
18
38
39 IF AGC
with IF AGC filter.
39
36
40
500
20k
1.2k1.2k
2
k
100
6k
40 IF GND GND terminal for IF circuit.
41
42
IF in
Input terminals for IF
signals.
Pin41 and Pin42 are both
input poles of differential
amplifier.
50k
20pF
1
.
4
k
50k
20pF
1
.
4
k
41
42
36
40
43 RF AGC
Output terminal for RF AGC
control level.
43
36
40
200 2k
44 Black Det
with Black Det filter for
black stretch.
44
47
18
4
k
4k
45
SVM /
Monitor
Output terminal for monitor
function. Also output
terminal for SVM signal.
Selectable through IIC bus
17
18
45
200
5
0
0
46 APC filter
with APC filter for Chroma
demodulation.
This terminal voltage
controls frequency of
VCXO.
152k
18
47
46
500
5
0
0

2005/03/29 33
Pin
No.
47 YC Vcc 5V
Vcc terminal for Y/C circuit.
Supply 5V.

48 Sync out
Output terminal for Sync
pulse.
A pull up resister is required
because of its open
collector output.
(Pull up resister: minimum
4.7kohm)
11
17
48
1
0
0
5k
49 DVCC
Vcc terminal for Digital
block.
This terminal voltage is
clipped about 3.3V by
regulator circuit.
Supply DVCC voltage from
A VCC 8V(#17) voltage via
270.

50 R out
Output terminal for R signal.
51 G out
Output terminal for G
signal.
52 B out
Output terminal for B signal.
17
18
51
50
52
100
53 TV DGND
GND terminal for digital
block.

2005/03/29 34
Signal Processor Descriptions
1. Tank-Coil-Less PIF VCO
TMPA8873 adopts a tank-coil-less PIF VCO circuit, which has advantages of cost, performance of weak IF
input and easy to design PCB layout. The PIF PLL system has self-alignment circuit, so that the micro
controller needs only to order the PIF PLL system to start self-alignment through the IIC bus. The
self-alignment finishes within 50 ms.
2. Built-In Sound Band Pass Filter
A sound band pass filter is integrated on the chip for multi frequency SIF systems. The 1st SIF demodulator
multiplies PIF input signal and regenerated PIF carrier from VCO with 90 angle, and gets multi-frequency
SIF signal as 6.5 MHz, 6.0 MHz, 5.5 MHz and 4.5 MHz according to the SIF system.
3. Built-In Sound Trap Filter
A sound trap filter is integrated on the chip for multi frequency SIF systems. The sound trap filter
characteristics are changed by WRITE BUS register setting. It is better that the setting data is had for each
SIF frequency.
4. AFT
A recent IF system adopts a digital AFT circuit. But analog DC voltage is used as interface between an IF
system and a micro controller in the AFT control loop. TMPA8873 adopts a digital interface through IIC bus
shown as below.
5. Non-Standard IF Signals
TMPA8873 prepares ways for non-standard IF inputs. The OVER MOD switch is available for
over-modulated PIF signals in the condition of more than 87.5% modulation at 100 IRE, which is the
maximum modulation Standard of PAL and NTSC. In addition, TMPA8873 has capability to modulate more
than 400% over-modulated SIF signal without undesired voltage turning over also.
41.67 kHz 41.67 kHz
41.67 kHz 41.67 kHz
1 0 0
1 0 0
f
0
= 38.0 MHz
166.68 kHz
500.04 kHz
41.67 kHz
0 1
AFT Window
Narrow
AFT Window
Wide
AFT Center
2005/03/29 35
6. AV Switch
The audio switch has two inputs for an external audio, and one for internal demodulated audio signal. The
two external audio inputs can use as audio stereo input. The switched audio signal goes into the audio
attenuator, which has controllability of audio gain from 0dB to 80dB or less with near log curve
characteristic.
The video switch has one input for an external CVBS or S-VHS signal, the other for the demodulated TV
video signal and the last for an external YCbCr signal, mainly coming form a DVD player. The CIN terminal
for the external S-VHS signal has capability to detect DC level of the input signal, and the micro controller
can read the result as CIN DC through the IIC bus. This function may prepare a way for automatic switching,
when inserting S-VHS connection, by means of software control.
A monitor output is available with the selected video signal. In the case of selecting S-VHS input, Y and C
signals are mixed for the monitor output. This output is useful for signal detecting by the TC3 counting of the
micro controller through an external LPF circuit for strict signal detecting performance.
7. Asymmetric Sharpness
External analog circuits are likely to generate over-shoot signal. The asymmetric sharpness circuit is
provided to compensate this undesired signal. It is possible to get more gain of pre-shoot than over-shoot by
using the asymmetric sharpness, instead of that a conventional sharpness function generates both pre-shoot
and over-shoot symmetrically.
8. Scan Velocity Modulation (SVM)
The SVM output is available for a large screen size TV. The SVM or the monitor output is selectable at pin
45 through the IIC bus. The SVM gain and timing is also selectable to match an external SVM drive circuit.
9. Chroma Demodulator
The PAL/NTSC chroma demodulator is integrated with the automatic color system detection. The 1 H-delay
line is integrated on the chip for PAL chroma demodulation. The 1 H-delay line can acts as a chroma comb
filter on NTSC chroma system.
10. Base Band Color System
TMPA8873 features a base band color system for a YCbCr inputs capability for a DVD and a SDTV signals.
Those signals are demodulated out side of TMPA8873, so that color signals (Cb, Cr) has different color level,
different demodulation angle and different relative amplitude from the color signals demodulated by the
internal chroma demodulator of TMPA8873. The base band color system is required to have control functions
of color saturation, TINT and relative amplitude, and TMPA8873 has all of these functions in it. Because of
base band TINT function, TMPA8873 has capability to control PAL TINT, which is basically hard to control on
a conventional signal processor IC. Of course the control software can inhibit the PAL TINT function.
11. Transparent OSD Interface
TMPA8873 provides a transparent OSD capability. A conventional OSD system provides a half-tone
function for OSD interface, by reducing the gain of a main picture signal during high period of Ym signal
from the micro controller. TMPA8873 has one more control line as I for OSD from the micro controller, which
enables to put a color on the same area of half-tone, so that software can achieve a see-through color menu by
using the transparent OSD.
12. Noise Level Detection
The Noise detector is integrated. The noise detection level is set by WRITE BUS register. The result can be
read through the IIC bus. According to the result, the micro controller can adjust level of some controls in the
signal processor. For example,
(1) When a noisy signal comes in, horizontal synchronization is influenced and the picture on the screen
looks bad. Selecting less H-AFC gain makes the picture looks better.
(2) When a very noisy signal comes in, the vertical frequency detector sometimes makes miss-detection, and
causes vertical jittering. Selecting the auto-50 Hz mode or auto-60 Hz mode, according to the vertical
frequency information just before, may solves the vertical jittering.
2005/03/29 36
13. Signal Detection Flags
There are some flags on the READ BUS registers. They indicate that a certain signal is detected at the
moment. But reliability of a detection result is not so accurate if checking only one flag, so that confirming
several flags, which means similar result by each other, at the same time is recommended.
14. Control the Signal Processor
The signal processor is connected with the micro controller by means of internal wiring. All functions of the
signal processor can be controlled through IIC bus, which is a part of the internal connections.
15. Thai mono-bilingual system
Thai mono-bilingual system requires two external sound BPFs(for S1/ S2 carriers) and SW.
Refer to following block diagram. Because two SIF frequencies are very near to each other.
33
SIF out
2nd SIF in
BPF
BPF 31
S2 carrier
S1 carrier
6
P
C
B

L
a
y
o
u
t

^SS l^kT \O. SllC OC^TTO\
T8|S3bk3\!?3 !!0bC330b\ Tk^\STSTOk \l\) bC33+0 O!0!
T8|S3bk3\!?3 !3C3C030?b TC SC3C030? TC!0!
T8|S3bk3\!?3 !+Tkl0b\\0 Tk l\TTTT\0 DTODl TS^b?00 D!0!
T8|S3bk3\!?3 !8Cb0??!T\\ klS. C.l. ??0 O|\ !b" k!0?
T8|S3bk3\!?3 !8Cb0??9T\\ klS. C.l. ?.? O|\ !b" k!0!
T8|S3bk3\!?3 ?|bb+9\!\ C^l. llC +. |l !0\ ?0 C!0+
T8|S3bk3\!?3 ?blbl!0!TCS C^l. Clk !00 ll 0\ C!0!
T8|S3bk3\!?3 ?blbl!0!TCS C^l. Clk !00 ll 0\ C!0?
T8|S3bk3\!?3 ?blbl!0+/lS C^l. Clk 0.!|l 0\ 80?0 C!03
T8|S3bk3\!?3 +0|OC^Skk\b!\0 l.C.b. kl\OTl |^\DSlT bD
T8|S3bk3\!?3 +!"T0!?0b00 "Tklb^klT|\llk!?\\ T!0!
T8|S3bk3\!?3 +COS+lY! Clk^\TC klSO\^TOk +l|/ \!0!
T8|S3bk3\!?3 +9|S3bk!00\9^ k|bblk l^D llYS
T8|S3bk3\!?3 |S3bkb!|^l O"lk C^Sl kl\OTl |^\DSlT
T8|S3bk3\!?3 |S3bkD0|^l b^TT. DOOk kl\OTl |^\DSlT
T8|S3bk3\!?3 |S3bkT!|^0l T\ DlC ^" |lllk C^Sl k\
T8|S3bk3\!?3 8|S3bk3!|T9C T\^Y kl\OTl |^\DSlT
T8|S3bk3\!?3 b\380b+0l? b^TTlkY SlkT\0 )
T8|S3bk3\!?3 b\380b0l? b^TTlkY SlkT\0 )
T8|S3bk3\!?3 b\380bb0l? b^TTlkY SlkT\0 )
T8|S3bk3\!?3 +000?bb0C lOYb^0 0\\\?b0\\\0.0b\\)
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D+0
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D+03
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D+0?
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D+0!
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D30!
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D+0b
T800!+S0l\^Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D+0+
T800!+S0l\^Y !0!\+00?lb\ DTODl !\+00? klCTTlTlk) D+?
T800!+S0l\^Y !0!\+00?lb\ DTODl !\+00? klCTTlTlk) D+?+
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D303
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) Db0!
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) Db0?
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D30?
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) Db03
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D+!3
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) Db00
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D0!?
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D00?
T800!+S0l\^Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D?0b
T800!+S0l\^Y !09C33\Db\ DTODl /l\lk 33\ !?" D!0!
T800!+S0l\^Y !09C3\9Db\ DTODl /l\lk 3\9 !?" D30+
T800!+S0l\^Y !09C3\9Db\ DTODl /l\lk 3\9 !?" D+!!
T800!+S0l\^Y !09Cb\?Db\ DTODl /l\lk b\? !?" D?0
T800!+S0l\^Y !0|S\!bDb\ DTODl 00\" .!|Sb D?!b
T800!+S0l\^Y !!SC??3Yb\ Tk^\STSTOk ?SC??3Y O+0!
T800!+S0l\^Y !8Cb0!0!T\\ klS. C.l. !00 O|\ !b" k009
b l^ \\ \TSC\ ^\.STkC^?S.^\ T\ \ 03l\?3S0lbO?3
T800!+S0l\^Y !8Cb0!0?T\\ klS. C.l. !l O|\ !b" k+!
T800!+S0l\^Y !8Cb0!0?T\\ klS. C.l. !l O|\ !b" k00
T800!+S0l\^Y !8Cb0!03T\\ klS. C.l. !0l O|\ !b" k+0b
T800!+S0l\^Y !8Cb0!03T\\ klS. C.l. !0l O|\ !b" k0!?
T800!+S0l\^Y !8Cb0!?!T\\ klS. C.l. !?0 O|\ !b" k+0!
T800!+S0l\^Y !8Cb0???T\\ klS. C.l. ?.?l O|\ !b" T9?!
T800!+S0l\^Y !8Cb0??T\\ klS. C.l. ?.l O|\ !b" kb0
T800!+S0l\^Y !8Cb0333T\\ klS. C.l. 33l O|\ !b" kb!?
T800!+S0l\^Y !8Cb0+?T\\
C^kbO\ klS. C.l. +.l O|\ !b"
kb0?
T800!+S0l\^Y !8Cb0+?T\\
kb0!
T800!+S0l\^Y !8Cb0+3T\\ klS. C.l. +l O|\ !b" k930
T800!+S0l\^Y !8Cb0b!T\\ klS. C.l. b0 O|\ !b" k?38
T800!+S0l\^Y !8Cb0b9T\\ klS.C.l .b O|\ !b" k3!
T800!+S0l\^Y !8CD0!00T\\ klS. C.l. !0 O|\ !+" k+0
T800!+S0l\^Y !8CD0!??T\\ klS. C.l. !.?l O|\ !+" k3!!
T800!+S0l\^Y !8CD08?0T\\ klS. C.l. 8? O|\ !+" k?98
T800!+S0l\^Y !8Cl0b8?T\\ klS. C.l. b.8l O|\ !?" k+!0
T800!+S0l\^Y !8Db0?+3l\\ klS. \.l. ?+l O|\ !b" ! k303
T800!+S0l\^Y !8Db0b8?l\\ klS. \.l. !b" b.8l O|\ ! k?++
T800!+S0l\^Y !8ll0!09TS? klS. l|S. ! O|\ !?" k+0
T800!+S0l\^Y !8ll0!09TS? klS. l|S. ! O|\ !?" k+09
T800!+S0l\^Y !8ll0!09TS? klS. l|S. ! O|\ !?" k+!8
T800!+S0l\^Y !8ll0??!TS\
klS.\.O.l !.0" !.0" ??0 O|\
k+!?
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C90!
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C90
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C0!b
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C9?
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C0?3
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C00+
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C0?
T800!+S0l\^Y ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C?+?
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C?!!
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C3!!
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C9?!
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 Cb!?
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C!0!
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C90b
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 Cb0?
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 Cb03
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C903
T800!+S0l\^Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 Cb!
T800!+S0l\^Y ?bCb??!\!\ C^l. llC ??0 |l !b\ ?0 Cb!3
T800!+S0l\^Y ?bCb??!\!\ C^l. llC ??0 |l !b\ ?0 C?3?
T800!+S0l\^Y ?bCb??!\!\ C^l. llC ??0 |l !b\ ?0 Cb!0
T800!+S0l\^Y ?bCb+0\!\ C^l. llC + |l !b\ ?0 C?0?
T800!+S0l\^Y ?bCb+0\!\ C^l. llC + |l !b\ ?0 C08!
T800!+S0l\^Y ?bCb+!\!\ C^l. llC +0 |l !b\ ?0 Cb0b
T800!+S0l\^Y ?bCb+!\!\ C^l. llC +0 |l !b\ ?0 C30
T800!+S0l\^Y ?bCb+!\!\ C^l. llC +0 |l !b\ ?0 C?!
T800!+S0l\^Y ?bDb+0\!\ C^l. llC + |l ?\ ?0 C+!9
T800!+S0l\^Y ?bDb+!\!\ C^l. llC +0 |l ?\ ?0 C+!
T800!+S0l\^Y ?bDb+!\!\ C^l. llC +0 |l ?\ ?0 C308
T800!+S0l\^Y ?blb!0!\!\ C^l. llC !00 |l 3\ ?0 C30?
T800!+S0l\^Y ?blb!0!\!\ C^l. llC !00 |l 0\ ?0 C!0b
T800!+S0l\^Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 C9!
T800!+S0l\^Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 C?03
T800!+S0l\^Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 Cb!b
T800!+S0l\^Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 C909
T800!+S0l\^Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 C9!!
T800!+S0l\^Y ?blb??9\!\ C^l. llC ?.? |l 0\ ?0 C?!+
T800!+S0l\^Y ?b|b!00\!\ C^l. llC !0 |l !00\ ?0 C+0b
T800!+S0l\^Y ?b|b!00\!\ C^l. llC !0 |l !00\ ?0 C+?0
T800!+S0l\^Y ?\lb??8l!\ C^l.llC 0.??|l 0\ !0 C?0
T800!+S0l\^Y ?\lb+8l!\ C^l.llC 0\ 0.+|l !0 C?!8
T800!+S0l\^Y ?\lb+8l!\ C^l.llC 0\ 0.+|l !0 C?3b
T800!+S0l\^Y ?kCb!00\!\
TC?kCb!00\!\ C^l.llC !0 |l
!b\
C??0
T800!+S0l\^Y ?kCb!00\!\
!b\
C??
T800!+S0l\^Y ?klb+9\!\ C^l.llC +. |l 0\ ?0 C?!b
T800!+S0l\^Y ?klb+9\!\ C^l.llC +. |l 0\ ?0 C!0+
T800!+S0l\^Y ?klb+9\!\ C^l.llC +. |l 0\ ?0 C3!0
T800!+S0l\^Y ?klb+9\!\ C^l.llC +. |l 0\ ?0 C30+
T800!+S0l\^Y ?b^TCb0T/\
TC?b^TCb0T/\ C^l. Clk b ll
00\
C+?b
T800!+S0l\^Y ?\bC!0+T0\ C^l. \.l.l 0.! |l b3\ C30
T800!+S0l\^Y ?\bC??3T0\ C^l. \.l.l 0.0??|l b3\ C+0!
T800!+S0l\^Y ?\bC??+T0\ C^l. \.l.l 0.??|l b3\ Cb?0
T800!+S0l\^Y ?\bC??+T0\ C^l. \.l.l 0.??|l b3\ Cb08
T800!+S0l\^Y ?\bC??+T0\ C^l. \.l.l 0.??|l b3\ Cb!!
T800!+S0l\^Y ?\bC??+T0\ C^l. \.l.l 0.??|l b3\ Cb!8
T800!+S0l\^Y ?\bC+3l0\
C^l. \.ll +\l b3\ !0
!30b0+0
C309
T800!+S0l\^Y ?\CC!0+T0\ Cl\ !00\0l !00.0\ k\ C+!0
T800!+S0l\^Y ?\CCb?T0\ C^l. \.l.l 0.00b|l !00\?0 C+??
T800!+S0l\^Y ?lbC???T0\ C^l. l.l 0.00??|l b3\ C30b
T800!+S0l\^Y 3+^??0l0!T\
COT l ??|| !0 0^030
??0l
?08
T800!+S0l\^Y 3+^??0l0!T\
COT l ??|| !0 0^030
??0l
080
T800!+S0l\^Y 3+^330l0!T\ COT C|Oll 33|| !0 ?0?
T800!+S0l\^Y 3+^330l0!T\ COT C|Oll 33|| !0 !0?
T800!+S0l\^Y 3+k!00T?0l\ COT l !0 || 00?
T800!+S0l\^Y +0l\!3Sl\^0!\0 T\ lCb \^ bD kY
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T0?!
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T?03
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T30!
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T303
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T3!?
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T9?+
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T?0b
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T9!!
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T0?0
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T0!8
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T?0?
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ Tb0+
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T+!b
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T3!+
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T+03
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T!0!
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T?0!
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T00b
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T9?0
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T3!!
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ k0?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T309
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T?!!
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ Tb03
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0!!
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0!b
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0??
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0?b
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ k?99
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T90?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0?9
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T+0!
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T9!b
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T9!?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T+0?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ Tb0b
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T0?8
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ Tb0?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ Tl9!?
T800!+S0l\^Y +!"T0!00b00 "Tklb^klT|\llk!0\\ Tb0!
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ Tl!03
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T9?3
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ Tb0
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T+!3
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T30+
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T9!+
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T30?
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T?0+
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T0!
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T0!+
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T0!?
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T0!0
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T?!3
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T?!b
T800!+S0l\^Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T009
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ T?!
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ T008
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ T!0?
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ T!00?
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ T+!?
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ Tl+0?
T800!+S0l\^Y +!"T0!0b00 "Tklb^klT|\llk!\\ +0?
T800!+S0l\^Y +!"T0!b00 "Tklb^klT|\llk!.\\ T0?
T800!+S0l\^Y +!"T0!b00 "Tklb^klT|\llk!.\\ Tb!9
T800!+S0l\^Y +!"T0!b00 "Tklb^klT|\llk!.\\ T0?+
T800!+S0l\^Y +!"T0!b00 "Tklb^klT|\llk!.\\ T0!3
T800!+S0l\^Y +!"T0!b00 "Tklb^klT|\llk!.\\ T9??
T800!+S0l\^Y +!"T0?00b00 "Tklb^klT|\llk?0\\ T0?3
T800!+S0l\^Y +!"T0?00b00 "Tklb^klT|\llk?0\\ T?!+
T800!+S0l\^Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk lbT
T800!+S0l\^Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk C+?!
T800!+S0l\^Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk C+0bb
T800!+S0l\^Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk O+0?
T800!+S0l\^Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk +!?
T800!+S0l\^Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk +!!
T800!+S0ll"Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D8!?
T800!+S0ll"Y !00lk!0+lb\ DTODl lk!0+ l^ST klCTTlTlk) D8?0
T800!+S0ll"Y !00k?lb\
DTODl k? Ok k?0blO"lk
klCTTlTlk)
D80+
T800!+S0ll"Y !00k?lb\
klCTTlTlk)
D803
T800!+S0ll"Y !00k?lb\
klCTTlTlk)
D80?
T800!+S0ll"Y !00k?lb\
klCTTlTlk)
D80!
T800!+S0ll"Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D80
T800!+S0ll"Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D8!9
T800!+S0ll"Y !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D8!+
T800!+S0ll"Y !09C!8\Db\ DTODl /l\lk !8\ !?" D8?!
T800!+S0ll"Y !09C\Db\
TC!09C\Db\ DTODl /l\lk
\ !?"
D8++
T800!+S0ll"Y !!S^!0!Yb\ Tk^\STSTOk ST?S^!0!Y l\l) O80!
T800!+S0ll"Y !3000T+3!T TCkl0SllClT T+3!^Cl k\ TC803
T800!+S0ll"Y !8Cb0!03T\\ klS. C.l. !0l O|\ !b" k83
T800!+S0ll"Y !8Cb0???T\\ klS. C.l. ?.?l O|\ !b" k8+
T800!+S0ll"Y !8CD0!0?T\\ klS. C.l. !l O|\ !+" k8+
T800!+S0ll"Y !8CD0???T\\ klS. C.l. ?.?l O|\ !+" k8!
T800!+S0ll"Y !8CD0+9T\\ klS. C.l. +. O|\ !+" k8?0
T800!+S0ll"Y !8CD0b0T\\ klS. C.l. b O|\ !+" k80!
T800!+S0ll"Y !8Cl0+9T\\ klS. C.l. +. O|\ !?" k8?3
T800!+S0ll"Y !8Cl0b!T\\ klS. C.l. b0 O|\ !?" k8!
T800!+S0ll"Y !8Dl08?3l\\ klS. \.l. 8?l O|\ !?" ! k839
T800!+S0ll"Y !8ll0!0T\3
klS. |.\OT. CC !\ O|\ !?"
k80?
T800!+S0ll"Y !8ll033+T\\ klS. \OT^0l C.C 330l O|\ !?" k80+
T800!+S0ll"Y ?bCb!0!\!\ C^l. llC !00 |l !b\ ?0 C+?3
T800!+S0ll"Y ?bCb??!\!\ C^l. llC ??0 |l !b\ ?0 C+!8
T800!+S0ll"Y ?bCb+!\!\ C^l. llC +0 |l !b\ ?0 C83?
T800!+S0ll"Y ?bCb+!\!\ C^l. llC +0 |l !b\ ?0 C8+
T800!+S0ll"Y ?bDb??0\!\ C^l. llC ?? |l ?\ ?0 C8!9
T800!+S0ll"Y ?bDb??0\!\ C^l. llC ?? |l ?\ ?0 C80
T800!+S0ll"Y ?bDb+0\!\ C^l. llC + |l ?\ ?0 C8?0
T800!+S0ll"Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 C8+
T800!+S0ll"Y 3b!000T\ llkk bl^D | 3.\!\) 8+0
T800!+S0ll"Y 3b!000T\ llkk bl^D | 3.\!\) 8!
T800!+S0ll"Y +!"T000b00
TC+!"T000b00 "Tkl b^kl
T|\llk \\ k
T8?+
T800!+S0ll"Y +!"T000b00
T|\llk \\ k
T8?3
T800!+S0ll"Y +!"T000b00
T|\llk \\ k
Tl80+
T800!+S0ll"Y +!"T00b00 "Tklb^klT|\llk.\\ T80b
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8!b
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8??
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8!0
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8!
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T809
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8?0
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T80?
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8?!
T800!+S0ll"Y +!"T0!00b00 "Tklb^klT|\llk!0\\ T8!?
T800!+S0ll"Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ k8!0
T800!+S0ll"Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T80
T800!+S0ll"Y +!"T0!?b00 "Tklb^klT|\llk!?.\\ T8!!
T800!+S0ll"Y +!"T0!0b00 "Tklb^klT|\llk!\\ T80!
T800!+S0ll"Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\
lOk
T803!,!3,!)
T800!+S0ll"Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk kT80!
T800!+S0ll"Y bb3+3300b0 |OO" kT\lT !.b\\\3.0\\\3.?\\ lOk O8!
T800!+S0ll"Y bb3+3+00b0 |OO" kT\lT ?.3\\\+.0\\\3.\\) lOk l803
T800!+S0ll"Y bb3+3+00b0 |OO" kT\lT ?.3\\\+.0\\\3.\\) lOk C80b
T80l\?30lll! !8Cb0!?+T\\ klS. C.l. !?0l O|\ !b" k008
T80l\?30lll! !8Cb0!?T\\ klS. C.l. !.l O|\ !b" k00
T80l\?30lll! !8Cb0!8?T\\ klS. C.l. !.8l O|\ !b" k00+
T80l\?30lll! !8Cb0???T\\ klS. C.l. ?.?l O|\ !b" k0!0
T80l\?30lll! !8Cb0??T\\ klS. C.l. ?.l O|\ !b" k003
T80l\?30lll! !8Cb0+3?T\\ klS. C.l. +.3l O|\ !b" k00?
T80l\?30lll! !8Cb0+0T\\ klS. C.l. + O|\ !b" k00b
T80l\?30lll! !8Cb0b8?T\\ klS. C.l. b.8l O|\ !b" k00!
T80l\?30lll! +0l\?3Slll^!\0 T\ lCb ll bD kY
T80l\?30lll! +!"T00b00 "Tklb^klT|\llk.\\ T00!
T80l\?30lll! +!"T00b00 "Tklb^klT|\llk.\\ k00
T80l\?30lll! +!"T00b00 "Tklb^klT|\llk.\\ T003
T80l\?30lll! +!"T00b00 "Tklb^klT|\llk.\\ T00?
T8Dl!0S0lCk\ !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D0!
T8Dl!0S0lCk\ !0!\+!+8^b\ DTODl !\+!+8 S"TTC|T\0) D0?
T8Dl!0S0lCk\ !!S^!0!Yb\ Tk^\STSTOk ST?S^!0!Y l\l) O!0
T8Dl!0S0lCk\ !!TC3?00b\ Tk^\STSTOk lTC3?0 O0?
T8Dl!0S0lCk\ !!TC3?00b\ Tk^\STSTOk lTC3?0 O03
T8Dl!0S0lCk\ !!TC3?00b\ Tk^\STSTOk lTC3?0 O0!
T8Dl!0S0lCk\ !8Cb0!0!T\\ klS. C.l. !00 O|\ !b" k0!
T8Dl!0S0lCk\ !8Cb0!0!T\\ klS. C.l. !00 O|\ !b" k0+
T8Dl!0S0lCk\ !8Cb0!0!T\\ klS. C.l. !00 O|\ !b" k0
T8Dl!0S0lCk\ !8Cb0!0?T\\ klS. C.l. !l O|\ !b" k09
T8Dl!0S0lCk\ !8Cb0!0?T\\ klS. C.l. !l O|\ !b" k0b
T8Dl!0S0lCk\ !8Cb0!0?T\\ klS. C.l. !l O|\ !b" k03
T8Dl!0S0lCk\ !8Cb0!0?T\\ klS. C.l. !l O|\ !b" k??
T8Dl!0S0lCk\ !8Cb0??T\\ klS. C.l. ?.l O|\ !b" k?+
T8Dl!0S0lCk\ !8Cb0+?T\\
k0
k08
k0?
T8Dl!0S0lCk\ !8Cb0b!T\\ klS. C.l. b0 O|\ !b" k?3
T8Dl!0S0lCk\ !8Cb0b8!T\\ klS. C.l. b80 O|\ !b" k?
T8Dl!0S0lCk\ !8Cb0b8!T\\ klS. C.l. b80 O|\ !b" k?
T8Dl!0S0lCk\ !8Cb0b8!T\\ klS. C.l. b80 O|\ !b" k?b
T8Dl!0S0lCk\ !8Cl0!00T\\ klS. C.l. !0 O|\ !?" !0 k30
T8Dl!0S0lCk\ !8Cl0!0T\\ klS. C.l. !\ O|\ !?" k?9
T8Dl!0S0lCk\ !8Cl0!?T\\ klS. C.l. !.l O|\ !?" k3!
T8Dl!0S0lCk\ !8ll0??T\\ klS. \.O. ?.l O|\ !?" k!b
T8Dl!0S0lCk\ !8ll0??T\\ klS. \.O. ?.l O|\ !?" k!
T8Dl!0S0lCk\ !8ll0??T\\ klS. \.O. ?.l O|\ !?" k!+
T8Dl!0S0lCk\ ?bCb!00\!\ C^l. llC !0 |l !b\ ?0 C!?
T8Dl!0S0lCk\ ?bCb??!\!\ C^l. llC ??0 |l !b\ ?0 C08
T8Dl!0S0lCk\ ?blbl!03/lS C^l.Clk !0\l 0\ 80 ?0 C0
T8Dl!0S0lCk\ ?blbl+!TCS C^l. Clk +0 ll 0\ C0!
T8Dl!0S0lCk\ ?blbl+!TCS C^l. Clk +0 ll 0\ C03
T8Dl!0S0lCk\ ?blbl+!TCS C^l. Clk +0 ll 0\ C0?
T8Dl!0S0lCk\ +0\!?30lCkl!\0 T\ lCb Ck bD kY
T8Dl!0S0lCk\ +!"T00b00 "Tklb^klT|\llk.\\ T09
T8Dl!0S0lCk\ +!"T00b00 "Tklb^klT|\llk.\\ T0!
T8Dl!0S0lCk\ +!"T00b00 "Tklb^klT|\llk.\\ T0?
T8l\?3S0lOT+ !8Cb0+!T\\ klS. C.l. +0 O|\ !b" k+33
T8l\?3S0lOT+ !8Cb0b83T\\ klS. C.l. b8l O|\ !b" k0?b
T8l\?3S0lOT+ ?blb??9\!\ C^l. llC ?.? |l 0\ ?0 Cb??^
T8l\?3S0lOT+ ?blb??9\!\ C^l. llC ?.? |l 0\ ?0 Cb?3^
T8l\?3S0lOT+ +!"T00b00 "Tklb^klT|\llk.\\ Tl9!!
T8l\?3S0lOT+ +!"T00b00 "Tklb^klT|\llk.\\ T!!!
T8l\?3S0lOT+ +!"T00b00 "Tklb^klT|\llk.\\ Tl90!
T8l\?3S0lOT+ +!"T0080b00 "Tklb^klT|\llk8\\ Tl80!
T8l\?3S0lOT+ +!"T0080b00 "Tklb^klT|\llk8\\ Tl80?
T8l\?3S0lOT+ +!"T0!00b00 "Tklb^klT|\llk!0\\ D?0+
T8l\?3S0lOT+ +!"T0!00b00 "Tklb^klT|\llk!0\\ T!008
T8l\?3S0lOT+ +!"T0!00b00 "Tklb^klT|\llk!0\\ T9!0
T8l\?3S0lOT+ +!"T0!00b00 "Tklb^klT|\llk!0\\ Tl9!b
T8l\?3S0lOT+ +!"T0!?b00 "Tklb^klT|\llk!?.\\ T90
T8l\?3S0lOT+ +!"T0!?b00 "Tklb^klT|\llk!?.\\ T00?
T8l\?3S0lOT+ +!"T0!0b00 "Tklb^klT|\llk!\\ Tl9!+
T8l\?3S0lOT+ +!"T0!0b00 "Tklb^klT|\llk!\\ Tl9!
03l\?3S0lbO?3 T8|S3bk3\!?3 ^SS'Ykl\OTl
T800!+S0l\^Y b???b800|^
T\ k^" S|llOkT C^bl C|^SSTS
00 00 00
T800!+S0l\^Y b???b80!|^
T\ k^" S|llOkT C^bl lbT 0!
00 00 k\
T80l\?30llC? 3bDl0!+0\\? Dl0^|SST\0 COT !080\\
T80l\?30llC? +!0\D0!+\0 CkT 0kO|\D bk^TDS
T80l\?30llC? +?0908D\\00 ST\ " 8O|\ kY
T80l\?30llC? ++!+OllTk8^ !+CkT 3S\!!0Y??DC0
T80l\?30llC? +b!390?|0?\0 |S ?l ?+b8-?? 3b0 S!!?Y\\
lb0!| lOk \. bD
lb0
T80l\?30llC? +b?0b00|0+\0 |S +l ^b 3b0!3 kb0" TTC!+Y
l+00 lOk D.Y
COT
T80l\?30llC? +b??0|0?\0 |S ?l?+ +0 l" TTC30?|
lb0?| lOk \. bD
lb0+
T80l\?30llC? +?0!+0000 Sl^Clk CkT \O|\TT\0 T?\\ \T0 CkT TO lC
T80l\?30llC? +3!++00\0
CkT lTbkl S|llT
??\\\??\\\0.8\\)
\T0 CkT TO lC
T80l\?30llC? +00900|\9
l^T lkO\Tl^\l !+\?3
^!?^b8!9 9 00
T80l\?30llC? l\?3lC!C\9|
DlC lkO\Tl^\l ^b8!9^!?
00 9^ 00
T80l\?30llC? bb?!!lb0|^b\
T\ l^T llY C|STlk \|?! bl 00 b\
00 k\
T80l\?30llC? bD^+!ll!|^b\ T\ l^T llY !+\?3 ^!? k\
T80l\?30llC? bl\?3l0|C/ l\S
T80l\?30llC? !0b+\00l T"TST TTl \Ybb
T80l\?30llC? 8D!0bST3|T8l
T\ lkT O\lk^Y ?9l?3
8C k\
T80l\?30llC? 9!30+b000\ k|bblk l^D ?\\\\\)
\T0 l.C^b
lOOTT\0
T80l\?30llC? b??!b3+00|\ TCb??!b3+00|\ bOCl k\
T80l\?30llC? b?+00800|\ S^\lk
T80l\?30llC? b3b30!00^b+0
SCkl"ST 3\\ !0\\ TTS b !!?? 3
0 0 kY
\T0 lClC lCb
T80l\?30llC? b3b+0!00^b+0 SCkl"ST +\\ !0\\ 3 kY \T0 lCSTOCl
T80l\?30llC? b3b+0?00^b+0 SCkl"ST +\\ ?0\\ TSO kY \T0 lC+STOCl
T80l\?30llC? b3"30!00^b+0 ST SCkl" " 3 \ !0 ^b \T0 lCSll
T80l\?30llC? b3"30!00^b+0 ST SCkl" " 3 \ !0 ^b \T0 lCl^Tl
T80l\?30llC? b3"30!00^b+0 ST SCkl" " 3 \ !0 ^b \T0 lCl\S
T80l\?30llC? b3"30!00^b+0 ST SCkl" " 3 \ !0 ^b \T0 lC+STDl ^\
T80l\?30llC? b3"30!80^b+0 ST SCkl" "3\!8 ^b \T0 lClb
T80l\?30llC? b3/0300^b+0 ST SCkl" / \ 30 ^b \T0 lCCkT
T80l\?30llC? b+9!80^09^
DlC T\lT ST\lk 0! 00 00
k\
T80l\?30llC? b\!?bb80l0 SlkT\0 CkT b\\\+0\\\0.\\
T80l\?30llC? b\?+?830l0 SlT\0 lO"lk l\Ob
T80l\?30ll^? 3b!+!390000 CO\\lkTlk 300 O|\lOk \TSC)
T80l\?30ll^? +!300000\
TC+!300000\ T"O kOD
^\Tl\\^ b?C\ T
T80l\?30ll^? +938?380b^T b^TTlkY - k03l ^^^ S|\+)
T80l\?30ll^? !lCD8000+!^3
T\ lkT ^bl ^bl Ol SlkT^ \O.
"|TTlb
lCD8000+!^000!
T80l\?30ll^? !ObOTb^k9b
T\ lkT ^bl ^bl Ol b^kCODl
k\
T80l\?30ll^? ?l\?30l\?39|
T\ Tb T\STk|CTTO\ bOOl TC C|S
kY
T80l\?30ll^? +0??03?b"l!^
DlC b^0 ll ??0\3?0\0.0b\\ 00
00 k\
T80l\?30ll^? +08!08!80|!^ lOYb^0
T80l\?30ll^? +0980lC0 lOYlO^\
T80l\?30ll^? +0990lC0 lOYlO^\
T80l\?30ll^? +!000lC0 lOYlO^\
T80l\?30ll^? +!0!0lC0 lOYlO^\
T80l\?30ll^? b+!0?00^T8
T\ DlC C^kTO\bO\ 00 80 00
kY
T80l\?30lkCY !+kCC\l
T\ DlC b^ClCO\lk !+ 0? 0!
00 k\
T80l\?30lkCY 8?!0bkT\|T9D
T\ lkT O\lk^Y kl^k ^\
b^Cl"|TTl 00 00
T80l\?30lkCY 8l\?3\lTlC9l
T\ DlC O\lk^Y "|TTl 0! 00 00
k\
T80l\?30lkCY b?3!+3+00|\ T\ k^" Sl^Clk lbT bl 00 00 k\
T80l\?30lkCY b?3+000|\
T\ k^" 0|TDl C|^SSTS bl 0? 00 00
kY
T80l\?30lkCY b3b+0?00^b30
SCkl"ST +\\ ?0\\ TTS b !!?? !?
kY
\T0 lCkC
T80l\?30lkCY b3l30!00bT30 SCkl"ST 3\\ !0\\ TSO b 0 0 kY
\T0 kC^ T^Cl
kl^k C^b.
T80l\?30lkCY b3"30!00^b+0 ST SCkl" " 3 \ !0 ^b
\T0 kl^k
Tk^ClT\0
T80l\?30lkCY b3"30!00^b+0 ST SCkl" " 3 \ !0 ^b
\T0 S|llOkTlk
blT k.C^b.
T8l\?3S0lOT+ !DC0!800C\0+0 lO"lk COkD TCCb!9?^00
T800!+S0l\^Y 0938b3\9DT\ S\D. DTODl b/\38+b3\9 D00!
T800!+S0l\^Y 09C8\?DT\ S\D.DTODl b/\C8\? D?!
T800!+S0l\^Y 09C8\?DT\ S\D.DTODl b/\C8\? D?!8
T800!+S0l\^Y 09C8\?DT\ S\D.DTODl b/\C8\? D+08
T800!+S0l\^Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O90
T800!+S0l\^Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) Ob0
T800!+S0l\^Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) Ob0?
T800!+S0l\^Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O?08
T800!+S0l\^Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) Ob0!
T800!+S0l\^Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O00b
T800!+S0l\^Y !?bC8^0b\ S\D Tk^\STSTOk bC8^ l\l) O?0
T800!+S0l\^Y !?bC8^0b\ S\D Tk^\STSTOk bC8^ l\l) O?!0
T800!+S0l\^Y !?bC8^0b\ S\D Tk^\STSTOk bC8^ l\l) O003
T800!+S0l\^Y !?bC8^0b\ S\D Tk^\STSTOk bC8^ l\l) Ob0+
T800!+S0l\^Y !?bC8^0b\ S\D Tk^\STSTOk bC8^ l\l) Ob03
T800!+S0l\^Y !300\?+C08b TC lllkO\ 8l \?+C08"kTTl) TC00!
T800!+S0l\^Y !3ll+03bTb TC |ll+03bTD) TC90!
T800!+S0l\^Y !3D!!!0b
TCkl0lOSl\D D!!!S0C \Ok\^
kY
TC00?
T800!+S0l\^Y !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 Tl+0!
T800!+S0l\^Y !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 k??
T800!+S0l\^Y !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 T3?+
T800!+S0l\^Y !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 T0!9
T800!+S0l\^Y !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 T90b
T800!+S0l\^Y !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 k9!
T800!+S0l\^Y !9^b0!00TT\ klS S\D !0 O|\ !!0" k?3!
T800!+S0l\^Y !9^b0!00TT\ klS S\D !0 O|\ !!0" k00
T800!+S0l\^Y !9^b0!00TT\ klS S\D !0 O|\ !!0" k00!
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k0+
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k!03
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 kb0+
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k!0?
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k?08
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k?+9
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k?0
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 kb03
T800!+S0l\^Y !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k0?8
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 kb0b
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 kb09
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k9??
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k9?0
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k90?
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k93
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k9+
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k0!3
T800!+S0l\^Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k90!
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k0?
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k3!
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k!0!8
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k0!
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k0!0
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k9!?
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k008
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k00b
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k030
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k0!!
T800!+S0l\^Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k9!3
T800!+S0l\^Y !9^b0!0+TT\ S\D. klS !00l O|\ !!0" 0b03 k03!
T800!+S0l\^Y !9^b0!0+TT\ S\D. klS !00l O|\ !!0" 0b03 k?3?
T800!+S0l\^Y !9^b0!0TT\ klS S\D !\ O|\ !!0" 0b03 k??!
T800!+S0l\^Y !9^b0!?TT\
S\D. klS !.l O|\ !!0"
0b03
k?!8
T800!+S0l\^Y !9^b0!?TT\
S\D. klS !.l O|\ !!0"
0b03
k???
T800!+S0l\^Y !9^b0!+TT\ S\D. klS !0l !!0" 0b03 k?+
T800!+S0l\^Y !9^b0!83TT\
S\D. klS !8l O|\ !!0"
0b03
k30?
T800!+S0l\^Y !9^b0??!TT\ klS S\D ??0 O|\ !!0" 0b03 k?0!
T800!+S0l\^Y !9^b0??!TT\ klS S\D ??0 O|\ !!0" 0b03 k?0?
T800!+S0l\^Y !9^b0??!TT\ klS S\D ??0 O|\ !!0" 0b03 k?03
T800!+S0l\^Y !9^b0??!TT\ klS S\D ??0 O|\ !!0" 0b03 k??8
T800!+S0l\^Y !9^b0???TT\ klS S\D ?.?l O|\ !!0" 0b03 k0!
T800!+S0l\^Y !9^b0??3TT\
S\D. klS ??l O|\ !!0"
0b03
k?!
T800!+S0l\^Y !9^b0??+TT\ S\D klS ??0l O|\ !!0" 0b03 k?0b
T800!+S0l\^Y !9^b0?!TT\
S\D. klS ?0 O|\ !!0"
0b03
k?!
T800!+S0l\^Y !9^b0??TT\ klS S\D ?.l O|\ !!0" 0b03 kb!0
T800!+S0l\^Y !9^b0??TT\ klS S\D ?.l O|\ !!0" 0b03 kb08
T800!+S0l\^Y !9^b0?3TT\ S\D. klS ?l O|\ !!0" k?!b
T800!+S0l\^Y !9^b033?TT\ S\D klS 3.3l O|\ !!0" 0b03 kb!b
T800!+S0l\^Y !9^b033?TT\ S\D klS 3.3l O|\ !!0" 0b03 k?09
T800!+S0l\^Y !9^b033?TT\ S\D klS 3.3l O|\ !!0" 0b03 kb!
T800!+S0l\^Y !9^b0333TT\ klS. S\D 33l O|\ !!0" 0b03 k?0
T800!+S0l\^Y !9^b0+0TT\ klS S\D + O|\ !!0" 0b03 k00?
T800!+S0l\^Y !9^b0+!TT\ S\D. klS +0 O|\ !!0" k9?+
T800!+S0l\^Y !9^b0+?TT\ klS S\D +.l O|\ !!0" 0b03 k0?9
T800!+S0l\^Y !9^b0+?TT\ klS S\D +.l O|\ !!0" 0b03 k00+
T800!+S0l\^Y !9^b0+?TT\ klS S\D +.l O|\ !!0" 0b03 k003
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k93
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k93b
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k93?
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k93!
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k9?8
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k9?
T800!+S0l\^Y !9^b0+3TT\ S\D. klS +l O|\ !!0" 0b03 k9?b
T800!+S0l\^Y !9^b0!0TT\ klS S\D ! O|\ !!0" 0b03 k9?3
T800!+S0l\^Y !9^b0!?TT\ klS. S\D .!l O|\ !!0" T 0b03 k30b
T800!+S0l\^Y !9^b08?0TT\ S\D. klS 8? 0|\ !!0" 0b03 k9?9
T800!+S0l\^Y !9^b08?0TT\ S\D. klS 8? 0|\ !!0" 0b03 k903
T800!+S0l\^Y !9^b08??TT\
S\D. klS 8.?l O|\ !!0"
0b03
k?3
T800!+S0l\^Y ?8^b0!0!TC\ S\D. C^l !00 ll 0\DC C00?
T800!+S0l\^Y ?8^b0!0!TC\ S\D. C^l !00 ll 0\DC C!03
T800!+S0l\^Y ?8^b0!0!TC\ S\D. C^l !00 ll 0\DC C00!
T800!+S0l\^Y ?8^b0!0!TC\ S\D. C^l !00 ll 0\DC C!0
T800!+S0l\^Y ?8^b0!0?lb\ S\D. C^l !000 ll 0\ !0 b C?!9
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C??+
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C!0
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C?0!
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C?!?
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C0?0
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C0?+
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C08?
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C!0?
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C??!
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C9!
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C?39
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C?33
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C??8
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C0!9
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C0!
T800!+S0l\^Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C00
T800!+S0l\^Y ?8^b0!0+/l\ C^l. S\D 0.!|l 0\ 80`?0 l C?8
T800!+S0l\^Y ?8^b0!0+/l\ C^l. S\D 0.!|l 0\ 80`?0 l C+!
T800!+S0l\^Y ?8^b0???lb\ C^l.S\D ??00ll 0\ !0 0b03 C+0
T800!+S0l\^Y ?8^b0???lb\ C^l.S\D ??00ll 0\ !0 0b03 C?!3
T800!+S0l\^Y ?8^b0???lb\ C^l.S\D ??00ll 0\ !0 0b03 C0!+
T800!+S0l\^Y ?8^b0??+/l\ C^l.S\D 0.??|l 0\ 80?00b03 Cb!+
T800!+S0l\^Y ?8^b0?0TC\ S\D. C^l ? ll 0\ 0b03 C0!!
T800!+S0l\^Y ?8^b0300TC\ S\D C^l. 30 ll 0\ 0b03 C0?!
T800!+S0l\^Y ?8^b0300TC\ S\D C^l. 30 ll 0\ 0b03 C0??
T800!+S0l\^Y ?8^b0+?lb\ C^l.S\D +00ll 0\ !0 0b03 Cb?!
T800!+S0l\^Y ?8^b0+?lb\ C^l.S\D +00ll 0\ !0 0b03 Cb!9
T800!+S0l\^Y ?8^b08?!TC\ C^l.S\D 8?0ll 0\ 0b03 C?0+
T800!+S0l\^Y ?8^b08??lb\ SD\. C^l 8?00 ll 0\ !0 0b03 C?3
T800!+S0ll"Y 09b^S3!b^T\ S\D.DTODl b^S3!b !! D8+0
T800!+S0ll"Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O8+!
T800!+S0ll"Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O8+
T800!+S0ll"Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O8++
T800!+S0ll"Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O8+
T800!+S0ll"Y !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O80?
T800!+S0ll"Y !3D!!!0b
TCkl0lOSl\D D!!!S0C \Ok\^
kY
TC+0?
T800!+S0ll"Y !3Tl^!0bTb TC Tl^!0bT\! !!8 TC80!
T800!+S0ll"Y !9^b0!00TT\ klS S\D !0 O|\ !!0" k8!+
T800!+S0ll"Y !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k8++
T800!+S0ll"Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k8+!
T800!+S0ll"Y !9^b0!03TT\ klS S\D !0l O|\ !!0" 0b03 k8?
T800!+S0ll"Y !9^b0!??TT\ S\D. klS !.?l O|\ !!0 T 0b03 k8!!
T800!+S0ll"Y !9^b0?0?lT\
S\D. klS ?l O|\ !!0" !
0b03
k838
T800!+S0ll"Y !9^b0???TT\ klS S\D ?.?l O|\ !!0" 0b03 k8?+C
T800!+S0ll"Y !9^b0???TT\ klS S\D ?.?l O|\ !!0" 0b03 k8+8
T800!+S0ll"Y !9^b0??3TT\
S\D. klS ??l O|\ !!0"
0b03
k83!
T800!+S0ll"Y !9^b0??3TT\
S\D. klS ??l O|\ !!0"
0b03
k8+b
T800!+S0ll"Y !9^b0??3TT\
S\D. klS ??l O|\ !!0"
0b03
k83?
T800!+S0ll"Y !9^b0??TT\ klS S\D ?.l O|\ !!0" 0b03 k83
T800!+S0ll"Y !9^b0?+TT\
S\D. klS ?0l O|\ !!0"
0b03
k8!9
T800!+S0ll"Y !9^b033?TT\ S\D klS 3.3l O|\ !!0" 0b03 k8!?
T800!+S0ll"Y !9^b0333TT\ klS. S\D 33l O|\ !!0" 0b03 k83
T800!+S0ll"Y !9^b0333TT\ klS. S\D 33l O|\ !!0" 0b03 k8!8
T800!+S0ll"Y !9^b039+TT\ S\D. klS 390l O|\ !!0" k8??
T800!+S0ll"Y !9^b0+0TT\ klS S\D + O|\ !!0" 0b03 k8?+b
T800!+S0ll"Y !9^b0+!TT\ S\D. klS +0 O|\ !!0" k8?!
T800!+S0ll"Y !9^b0+?TT\ klS S\D +.l O|\ !!0" 0b03 k83b
T800!+S0ll"Y !9^b0b83TT\ klS S\D b8l O|\ !!0" 0b03 k8?b
T800!+S0ll"Y ?8^b0!0?lb\ S\D. C^l !000 ll 0\ !0 b C839
T800!+S0ll"Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C8+?
T800!+S0ll"Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C+?
T800!+S0ll"Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C83!
T800!+S0ll"Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C8++
T800!+S0ll"Y ?8^b0!03lb\ S\D. C^l 0.0! |l 0\ !0 0b03 C+!
T800!+S0ll"Y ?8^b0!0+lb\ S\D. C^l 0\DC 0.!|l !0 0b C83
T800!+S0ll"Y ?8^b0!0+lb\ S\D. C^l 0\DC 0.!|l !0 0b C8!+
T800!+S0ll"Y ?8^b0??!TC\ C^l.S\D ??0ll 0\ C 0b03 C8?!
T800!+S0ll"Y ?8^b0??+/l\ C^l.S\D 0.??|l 0\ 80?00b03 C8!8
T800!+S0ll"Y ?8^b0+!lb\ S\D.C^l. +0ll 0\ !0 C8!b
T800!+S0ll"Y ?8^b0+!lb\ S\D.C^l. +0ll 0\ !0 C8!3
T800!+S0ll"Y ?8^b0+3lb\ S\D C^l 0.0+|l 0\ !00b03 C8!!
T8!+OlS\
\C|30l?
!9^b0!3TT\ klS S\D !l O|\ !!0" 0b03 k+!+
T8!+OlS\
\C|30l?
!9^b0393TT\ S\D. klS 39l O|\ !!0" k8+?
T8l\?3S0lOT+ !?bC8+^0b\ S\D Tk^\STSTOk bC8+^ \l\) O!00
T8l\?3S0lOT+ !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 T!0!+
T8l\?3S0lOT+ !9^b0000TT\ klS S\D 0 O|\ !!0" 0b03 T!0!3
T8l\?3S0lOT+ !9^b0!0!TT\ klS S\D !00 O|\ !!0" 0b03 k+3b
T8l\?3S0lOT+ !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k!008
T8l\?3S0lOT+ !9^b0!0?TT\ klS S\D !l O|\ !!0" 0b03 k!00
T8l\?3S0lOT+ ?8^b0!0?lb\ S\D. C^l !000 ll 0\ !0 b C!0+b
03l\?3S0lbO?3 \8TS\!?30bl0b SOlT"^kl CODl lOk TC00!
T800!+S0l\^Y !!DD0?30C\ Tk^\STSTOk 3DD0?3 O+0?
T800!+S0l\^Y !3TD^+8b+^S TC TD^+8b+^T TC30!
T800!+S0l\^Y !3Tl^?0?bl TC Tl^?0?b?\?" TCb0!
T800!+S0l\^Y !8Cb0+0T\\ klS. C.l. + O|\ !b" C+0+
T800!+S0l\^Y !8ll0+8T0\ klS. l|S. 0.+ O|\ !" k+03
T800!+S0l\^Y !8l00!09T|\ klS. l|S. ! O|\ ?" k+?!
T800!+S0l\^Y !8ll0!0?TS\ k\Ol !" !l' k+08
T800!+S0l\^Y !8ll0!03T0\ klS. \.O. !0l O|\ !" k309
T800!+S0l\^Y !8ll0!?3T0\ klS. \.O. !?l O|\ !" k+!3
T800!+S0l\^Y !8ll0??0T0\ klS. \.O. ?? O|\ !" k+?9
T800!+S0l\^Y !8ll039!TS\ \Ol klSTSTOkS !" 390' k33b
T800!+S0l\^Y !8ll0b9T0\ klS. \.O.l .b O|\ !" k30+
T800!+S0l\^Y !8l00??!T|\ klS. \.O. ??0 O|\ ?" k30
T800!+S0l\^Y !8l00???T^\ klS. \.O. ?.?l O|\ ?" k+!!
T800!+S0l\^Y !8kl0!9T0\ klS. "Tkl kO|\D !. O|\ !" k3!?
T800!+S0l\^Y ?bD^!0?\!\ C^l. llC !000 |l ?\ ?0 C+!3
T800!+S0l\^Y ?blb!09\!\ C^l. llC ! |l 0\ ?0 C9!b
T800!+S0l\^Y ?b^!00\!\ C^l. llC !0 |l ?0\ ?0 C+08
T800!+S0l\^Y ?lT0!0!\!\ C^l.Cll !00|l!b0\?0 C+!!
T800!+S0l\^Y ?kCb!00\!\
!b\
C?3!
T800!+S0l\^Y ?b^TC39!lb\ C^l. Clk 390 ll 00\ !0 b C+03
T800!+S0l\^Y ?b^TC39!lb\ C^l. Clk 390 ll 00\ !0 b C+09
T800!+S0l\^Y ?b^TC39!lb\ C^l. Clk 390 ll 00\ !0 b C+!?
T800!+S0l\^Y ?b^\\+!T/\ C^l.Clk +0ll ?l\ C+0?
T800!+S0l\^Y ?^0O+3+TS\ C^l. \.ll 0.+3|l ?0\ C+?!
T800!+S0l\^Y ?^k!!3T0\ C^l. \.ll 0.0!! |l !.bl\ C+0bb
T800!+S0l\^Y ?C^!0+T0\ C^l. l.l. 0.!|l !00\ C?3+
T800!+S0l\^Y 3b|Dk0?9\\0 Tk^\SlOk\lk |Ok. DkT\l bCT!0!?^ T+0!
T800!+S0l\^Y 3bT\00\\! COT T\l^kTTY 0 || +!?
T800!+S0l\^Y +!"T00b00 "Tklb^klT|\llk.\\ T+!!
T800!+S0l\^Y +OSC8\00Y0b CkYST^ 8.0\|/ CC30ll \00!
T800!+S0l\^Y +S^"l!890 S^" lTTlk l!89 /!0!
T800!+S0l\^Y +b!?8bb"0?\0 lT\ b^Sl +? S!!0?Y lb0?3)
T800!+S0l\^Y +b?098"0+\0 lT\ b^Sl ++ TTC!+^
l+00 lOk DY
CO\\lCTOk
T800!+S0l\^Y +b?88!b|0\0 |S l?+ 00 TTC3YSC\Y l?0! TO l0!
T800!+S0l\^Y +b30b!|0+\0 |S +l?+ +b0 l" TTC3+YSC\+ l+0? TO l0?
T800!+S0l\^Y +b3309"0?\0 lT\ b^Sl +? TTC3?^ lb0+
T800!+S0l\^Y +b3309"0+\0 lT\ b^Sl ++ TTC3+^ l003
T800!+S0l\^Y !0b+\00l T"TST TTl \Ybb
T800!+S0l\^Y b+b3008030+0 TkT^\0l \C SCkl" b 3 \ 8 lOk TC30!
T800!+S0l\^Y b+b3008030+0 TkT^\0l \C SCkl" b 3 \ 8 lOk O+0?
T800!+S0l\^Y b/3000?3\0 \|T \ 3 lOk TC30!
T800!+S0l\^Y b38+?b00l |l^T ST\l lOk O+0?
T800!+S0l\^Y b38!90!^0 |l^T ST\l lOk TCb0!
T800!+S0l\^Y b|30?3^0 k^" |l^TST\l 03 00 kY lOk TC30!
T800!+S0ll"Y !00k|3^\lb\ |T0| lllTCTl\CY klCTTlTlk k|3^\ D833
T800!+S0ll"Y !00k|+Y\l0\ DTODl 0k|+Y\ l^ST klCO\lkY) D8+!
T800!+S0ll"Y !!SD?0!?0C\ Tk^\STSTOk ?SD?0!? O8+3
T800!+S0ll"Y !!Sl?b+0^\ Tk^\STSTOk ?Sl?b+0!\k lO"lk O8!
T800!+S0ll"Y !30|lC9??Cl
TC!30|lC9??Cl l|OTO CO|llk
|lC9??C
TC80?
T800!+S0ll"Y !8CD0!0!T\\ klS. C.l. !00 O|\ !+" k8!3
T800!+S0ll"Y !8ll0??9T0\ klS. l|S. ?.? O|\ !" k8+3
T800!+S0ll"Y !8l00??9T|\ klS. \.O. ?.? O|\ ?" k8?
T800!+S0ll"Y !8ll08?T|\ klS. 0^SS 0^/l 8.?\ O|\ !" k8?9
T800!+S0ll"Y !8k00!08T|\ klS. "Tkl kO|\D 0.! O|\ ?" k8!
T800!+S0ll"Y ??\TC+9\\0 \TC +.D?!+ k803
T800!+S0ll"Y ??lTC?00\\! lTC ?0 O|\ ?0 \/3b| kT80!
T800!+S0ll"Y ?bD^!0?\!\ C^l. llC !000 |l ?\ ?0 C8+3
T800!+S0ll"Y ?b\T!!\!\ C^l. llC !0 |l +00\ ?0 C80b
T800!+S0ll"Y ?lT0!0!\!\ C^l.Cll !00|l!b0\?0 C83
T800!+S0ll"Y ?b^TC??!lb\ C^l. Clk ??0 ll 00\ !0 b C8+!
T800!+S0ll"Y ?b^T!03\l\ C^l.Clk !0\l 00\ ?0 C80
T800!+S0ll"Y ?b^T!03\l\ C^l.Clk !0\l 00\ ?0 C8?b
T800!+S0ll"Y ?b^l^??!lk\ C^l. Clk ??0 ll !l\ !0 C833
T800!+S0ll"Y ?b^l\??!lk\ C^l. Clk ??0 ll !l\ !0 C809
T800!+S0ll"Y ?b^\\33!lk\ C^l. Clk 330 ll ?l\ !0 C8!
T800!+S0ll"Y ?b^ll!0?\l\ C^l. Clk !000ll +00\^C ?0l C8?9
T800!+S0ll"Y ?b^ll!0?\l\ C^l. Clk !000ll +00\^C ?0l C803
T800!+S0ll"Y ?b^ll!0?\l\ C^l. Clk !000ll +00\^C ?0l C80+
T800!+S0ll"Y ?bÔl+?/l\
C^l. Clk +00ll ?0\^C 80 ?0
l
C808
T800!+S0ll"Y ?bÔl+?/l\
C^l. Clk +00ll ?0\^C 80 ?0
l
C80
T800!+S0ll"Y ?ÔT++\\3 C^l.\.ll0.+|l?\^C?0 C80!
T800!+S0ll"Y ?\|\!0+l0\ C^l. \.l.l 0.! |l +00\ !0 C80?
T800!+S0ll"Y 3+k!0!l?!b\ COT C|Oll !00 || !0 83+
T800!+S0ll"Y 3+k??0l?!b\ COT C|Oll ?? || !0 8+3
T800!+S0ll"Y 339?!000\ llkk.COT blT300Cb83 833
T800!+S0ll"Y 3bTl00+^\0
TC3bTl00+^\0 T\l lTTlk
k\
T80!
T800!+S0ll"Y 3bTkl?3!^\0 Tk^\SlOk\lk CO\\. bCl?890 T803
T800!+S0ll"Y +b!09b?"0?\0 lT\ b^Sl +? TTC??^ l803
T800!+S0ll"Y 00?000D!0S!0 l|Sl ?.0^T ?0\^C \\\?0\\ l80!
T800!+S0ll"Y b3b30!00^b+0
SCkl"ST 3\\ !0\\ TTS b !!?? 3
0 0 kY
lOk O8!
T800!+S0ll"Y b+b3008030+0 TkT^\0l \C SCkl" b 3 \ 8 lOk O8+3
T800!+S0ll"Y bb?0!b\0b0 l|Sl |ODlk lOk l80!
T800!+S0ll"Y b|!09!8+\? |l^T ST\l lOk O8+3
T800!+S0ll"Y b|+!3+!?^0 |l^T ST\l lOk O8!
T800!+S0ll"Y b\+00b8!l+
T\ k^" bk^CllT TC CkT 00 00
k\
lOk O8!
T800!+S0ll"Y !DYl000"\? ^bl
STTCl O\ |l^T
ST\l
T8l\?3S0lOT+ 0+ll\^90 T|\lk l00l+\Dl T|!0!
T8l\?3S0lOT+ !3TS\!?30b\0! \C| T\l^883CSb\0 TC?0!
T8l\?3S0lOT+ 3l^^T0?b^^!^ !+lbT bSC?0?!+S T+0?
T8l\?3S0lOT+ +b3309"0+\0 lT\ b^Sl ++ TTC3+^ l90
T8l\?3S0lOT+ +b3309"0\0 lT\ b^Sl + TTC3^ l00?
T8l\?3S0lOT+ +b30b3"03\0 lT\ b^Sl +3 \|3^
l80? lOk lO"lk
COkD
T8l\?3S0lOT+ +kC^03\\00 kC^ T^Cl ^\3.?b"l l903
T8l\?3S0lOT+ 0?!!000^ Slk\TCl C^kD
lOk lkOD|CTTO\
|Sl
T8l\?3S0lOT+ !?0800^9 ^bl
T80l\?30lll! 0?Tkk00!\\! Tk klClT\lk \OD|l |k\3800! Tk08!
T80l\?30lll! !+lD03k\\! lD klD 3\\ lO?03 D08!
T80l\?30lll! ?bCb??0\!\ C^l. llC ?? |l !b\ ?0 C08!
T80l\?30lll! +b3033|0\0 |S l ?+b8-?+ 3?0 TTC3YSC\
l00? TO \.bD
l00?
T80l\?30lll! +8T^C00!D\0 T^CT S"TTC| lOS90? l00?
T80l\?30lll! +8T^C00!D\0 T^CT S"TTC| lOS90? l00
T80l\?30lll! +8T^C00!D\0 T^CT S"TTC| lOS90? l00!
T80l\?30lll! +8T^C00!D\0 T^CT S"TTC| lOS90? l00+
T80l\?30lll! +8T^C00!D\0 T^CT S"TTC| lOS90? l00b
T80l\?30lSTY +0l\?308STb!\0 T\ lCb ST bD kY
T80l\?30lSTY +b3080|0+\0 |S +l ?+b8-?+ 390 TTC3+YSC\+Y
S90+^ l+l lOk
\. bD l90
T80l\?30lSTY +kC^0+!\\00 T^Cl kC^ 3l| |8\\ Y "| kDS" l!!0!
T8Dl!0S0lCk\ !0!\+00+lb\ DTODl T\+00+ klCTTlTlk) D0+
T8Dl!0S0lCk\ !8l00!3T|\ klS. \.O. !l O|\ ?" k!0
T8Dl!0S0lCk\ !8l00!3T|\ klS. \.O. !l O|\ ?" k!!
T8Dl!0S0lCk\ !8l00!3T|\ klS. \.O. !l O|\ ?" k!?
T8Dl!0S0lCk\ ?b^!00\!\ C^l. llC !0 |l ?0\ ?0 C0+
T8Dl!0S0lCk\ ?b^\\!0?lb\ C^l. Clk !000 ll ?l\ !0 b C00
T8Dl!0S0lCk\ ?blbl!03/l! C^l Clk 0\ ?.\\ !0ul ?080 C!+
T8Dl!0S0lCk\ 3!393000\ llkk. bl^D blb0
lOk C!+ 0
0b)
T8Dl!0S0lCk\ +b!09b"0!\0 lT\ b^Sl +! TTC!!^ l03
T8Dl!0S0lCk\ +b3309"0\0 lT\ b^Sl + TTC3^
l0! lOk \.bD
l?0!
T8Dl!0S0lCk\ +b3!9"0+\0 lT\ b^Sl TTC3+^
l0? lOk \. bD
l+0?
T8Dl!0S0lCk\ +CkT0??\\00 CkT SOCllT 0/S!0?DD? DO) S0!^
T80l\?30lkCY +!!+00000\
T\ k^" llT l^llk
!0\\\!9\\\0.3\\ bl 0!
T80l\?30lkCY 9!30+b000\ k|bblk l^D ?\\\\\)

14N23 M123SP

Uploaded by

Copyright:

Available Formats

14N23 M123SP

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

14N23 M123SP

Uploaded by

Copyright:

Available Formats

TCL

-Number of Local Control(incl.Mains)

Confidential TMPA8873PSNG /CMNG /CPNG /CRNG /CSNG

Confidential TMPA8873PSNG /CMNG /CPNG /CRNG /CSNG

You might also like