Scribd
Upload
1K views7 pages

Uputstvo BH Telecom-TP Link-Router

This document provides instructions for configuring a TP-Link ADSL modem in bridge mode. The steps include: 1) Enabling the local network connection and setting it to obtain an IP address automatically. 2) Opening a web browser and navigating to the modem's admin page at 192.168.1.1. 3) Logging into the admin page with the default credentials and configuring PVC4 for PPPoE mode by selecting the encapsulation and entering the username and password. 4) Clicking "Save" to apply the changes and then checking the status to verify the WAN connection.

Uploaded by

LaMilaca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views7 pages

Uputstvo BH Telecom-TP Link-Router

This document provides instructions for configuring a TP-Link ADSL modem in bridge mode. The steps include: 1) Enabling the local network connection and setting it to obtain an IP address automatically. 2) Opening a web browser and navigating to the modem's admin page at 192.168.1.1. 3) Logging into the admin page with the default credentials and configuring PVC4 for PPPoE mode by selecting the encapsulation and entering the username and password. 4) Clicking "Save" to apply the changes and then checking the status to verify the WAN connection.

Uploaded by

LaMilaca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 7

Postupak konfiguracije ADSL modema TP Link u bridge modu Nakon povezivanja modema svim potrebnim kablovima na raunar, linija

i napajanje, ukljuujemo raunar. Nakon uitavanja Windowsa kliknemo na Start i odaberemo grupu Settings, te Network Connections.

Otvara se prozor sa mrenim vezama i dobijemo sljedei prozor:

Ako je Local Area Connection u stanju Disabled, kao na slici, desnim tasterom mia kliknemo na ikonicu i odaberemo lijevim tasterom opciju Enable.

Nakon aktiviranja mrene veze Local Area Connection status mrene konekcije e se promijeniti u Acquiring Network Address, a ubrzo i u Connected. Provjerimo Properties u Statusu Local Area Connection; potrebno je da oznaimo opciju Optain an IP address automatically da bi raunar dobio automatski IP adresu od modema putem DHCP:

Sljedei korak je zatvaranje svih otvorenih prozora i pokretanje Internet Explorera ili nekog drugog web browsera.

U prozoru browsera ukucavate IP adresu 192.168.1.1 u polje Address i pritisnete Enter na tastaturi.

Dobiete prozor sa poljima za unos podataka za pristup modemu. Fabriki podaci su Username: admin Password: admin

Klikom na OK potvrujete da ste ukucali ispravne podatke za autorizaciju i nakon toga se pojavljuje poetna stranica administracije modema.

Za konfiguraciju modema u router modu rada potrebno je uraditi sljedee: Kliknuti na link Interface Setup.

Kliknuti na PVCs Summary tab.

Vidimo da je PVC 4 ve konfigurisan sa podatkom VPI/VCI 8/35. Potrebno je PVC4 modifikovati u pppoe mode rada. U padajuem meniju Virtual Cicuit odabrati PVC4 kao na slici:

Na dijelu ekrana Encapsulation ISP udabrati opciju PPPoA/PPPoE kao na slici:

Na dijelu PPPoE/PPPoA unijeti podatke za Username i Password:

Na kraju uraditi SAVE na dnu ekrana:

Kako bi provjerili status konecije dovoljno je kliknuti na Status, kao WAN konekciju odabere se PVC4 u padajuem meniju opcije Virtual Circuit:

Napominjemo da je model TP Link modem/Router sa 4 LAN Ethernet porta na koji se moe prikljuiti 4 raunara koji na prikazani nain konfiguracije modema mogu istovremeno izai na Internet.

You might also like