Scribd
Upload
30 views1 page

29 Model

This is an engineering drawing showing front and top views of a mechanical part. The front view shows dimensions of 50 mm by 40 mm with a protrusion of 0.1 mm labeled A extending from the bottom center. The top view shows the part is 15 mm thick and has a hole labeled B with a diameter of 0.04 mm located at the center. The drawing includes title, class, date, name, division, batch, scale, roll number, and signature of the designer.

Uploaded by

Sameer Shaikh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views1 page

29 Model

This is an engineering drawing showing front and top views of a mechanical part. The front view shows dimensions of 50 mm by 40 mm with a protrusion of 0.1 mm labeled A extending from the bottom center. The top view shows the part is 15 mm thick and has a hole labeled B with a diameter of 0.04 mm located at the center. The drawing includes title, class, date, name, division, batch, scale, roll number, and signature of the designer.

Uploaded by

Sameer Shaikh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

B

15
A

FRONT VIEW

0.04 B

0.1 A

50

40

ALL DIMENSIONS ARE IN MM.


V V P INSTITUTE OF ENGG. & TECHNOLOGY, SOLAPUR

TITLE : PRODUCTION

DRAWING
CLASS: SE (MECH)
DATE : 22/ 10 / 11

129

NAME : PAWAR MAHESH S.


DIV : A BATCH : SA2 SCALE :
SYMBOL :

1:1

TOP VEIW

ROLL NO : 29

SIGN:

You might also like