Distance Vector Routing Protocols

Routing Protocols and Concepts Chapter 4

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Objectives

Identify the characteristics of distance vector routing protocols.

Describe the network discovery process of distance vector routing protocols using Routing Information Protocol (RIP). Describe the processes to maintain accurate routing tables used by distance vector routing protocols.

Identify the conditions leading to a routing loop and explain the implications for router performance.
Recognize that distance vector routing protocols are in use today
2007 Cisco Systems, Inc. All rights reserved. Cisco Public

ITE PC v4.0 Chapter 1

Distance Vector Routing Protocols

Examples of Distance Vector routing protocols: Routing Information Protocol (RIP) Interior Gateway Routing Protocol (IGRP) Enhanced Interior Gateway Routing Protocol (EIGRP)

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Distance Vector Routing Protocols

Distance Vector Technology

The Meaning of Distance Vector:

A router using distance vector routing protocols knows 2 things: Distance to final destination Vector, or direction, traffic should be directed

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Distance Vector Routing Protocols

Characteristics of Distance Vector routing protocols:
Periodic updates

Neighbors

Broadcast updates
Entire routing table is included with routing update

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Distance Vector Routing Protocols

Routing Protocol Algorithm:
-Defined as a procedure for accomplishing a certain task

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Distance Vector Routing Protocols

Routing Protocol Characteristics Criteria used to compare routing protocols includes

-Time to convergence -Scalability

-Resource usage
-Implementation & maintenance

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Distance Vector Routing Protocols

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Network Discovery
Router initial start up (Cold Starts)
-Initial network discovery Directly connected networks are initially placed in routing table

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

Network Discovery
Initial Exchange of Routing Information If a routing protocol is configured then

-Routers will exchange routing information

Routing updates received from other routers -Router checks update for new information

If there is new information:

-Metric is updated -New information is stored in routing table

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

10

Network Discovery
Exchange of Routing Information
Router convergence is reached when -All routing tables in the network contain the same network information Routers continue to exchange routing information -If no new information is found then Convergence is reached

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

11

Network Discovery
Convergence must be reached before a network is considered completely operable Speed of achieving convergence consists of 2 interdependent categories -Speed of broadcasting routing information -Speed of calculating routes

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

12

Routing Table Maintenance

Periodic Updates: RIPv1 & RIPv2 These are time intervals in which a router sends out its entire routing table.

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

13

Routing Table Maintenance

RIP uses 4 timers
-Update timer

-Invalid timer

-Holddown timer
-Flush timer

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

14

Routing Table Maintenance

Bounded Updates: EIGRP
EIRPG routing updates are -Partial updates

-Triggered by topology changes

-Bounded -Non periodic

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

15

Routing Table Maintenance

Triggered Updates

Conditions in which triggered updates are sent

-Interface changes state -Route becomes unreachable -Route is placed in routing table

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

16

Routing Table Maintenance

Random Jitter
Synchronized updates A condition where multiple routers on multi access LAN segments transmit routing updates at the same time. Problems with synchronized updates -Bandwidth consumption -Packet collisions Solution to problems with synchronized updates

- Used of random variable

called RIP_JITTER

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

17

Routing Loops
Routing loops are A condition in which a packet is continuously transmitted within a series of routers without ever reaching its destination.

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

18

Routing Loops
Routing loops may be caused by:
-Incorrectly configured static routes -Incorrectly configured route redistribution -Slow convergence -Incorrectly configured discard routes

Routing loops can create the following issues

-Excess use of bandwidth -CPU resources may be strained -Network convergence is degraded -Routing updates may be lost or not processed in a timely manner

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

19

Routing Loops
Count to Infinity
This is a routing loop whereby packets bounce infinitely around a network.

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

20

Routing Loops
Setting a maximum Distance Vector routing protocols set a specified metric value to indicate infinity Once a router counts to infinity it marks the route as unreachable

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

21

Routing Loops
Preventing loops with holddown timers -Holddown timers allow a router to not accept any changes to a route for a specified period of time. -Point of using holddown timers Allows routing updates to propagate through network with the most current information.

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

22

Routing Loops
The Split Horizon Rule is used to prevent routing loops Split Horizon rule: A router should not advertise a network through the interface from which the update came.

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

23

Routing Loops
Split horizon with poison reverse
The rule states that once a router learns of an unreachable route through an interface, advertise it as unreachable back through the same interface

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

24

Routing Loops
IP & TTL Purpose of the TTL field The TTL field is found in an IP header and is used to prevent packets from endlessly traveling on a network

How the TTL field works

-TTL field contains a numeric value The numeric value is decreased by one by every router on the route to the destination. If numeric value reaches 0 then Packet is discarded.
ITE PC v4.0 Chapter 1 2007 Cisco Systems, Inc. All rights reserved. Cisco Public

25

Routing Protocols Today

Factors used to determine whether to use RIP or EIGRP include

-Network size
-Compatibility between models of routers -Administrative knowledge

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

26

Routing Protocols Today

RIP
Features of RIP: -Supports split horizon & split horizon with poison reverse -Capable of load balancing -Easy to configure

-Works in a multi vendor router environment

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

27

Routing Protocols Today

EIGRP Features of EIGRP:
-Triggered updates

-EIGRP hello protocol used to establish neighbor adjacencies

-Supports VLSM & route summarization -Use of topology table to maintain all routes -Classless distance vector routing protocol -Cisco proprietary protocol
ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

28

Summary
Characteristics of Distance Vector routing protocols
Periodic updates RIP routing updates include the entire routing table Neighbors are defined as routers that share a link and are configured to use the same protocol

The network discovery process for D.V. routing protocol

Directly connected routes are placed in routing table 1st If a routing protocol is configured then Routers will exchange routing information Convergence is reached when all network routers have the same network information
ITE PC v4.0 Chapter 1 2007 Cisco Systems, Inc. All rights reserved. Cisco Public

29

Summary
D.V. routing protocols maintains routing tables by
RIP sending out periodic updates RIP using 4 different timers to ensure information is accurate and convergence is achieved in a timely manner EIGRP sending out triggered updates

D.V. routing protocols may be prone to routing loops

routing loops are a condition in which packets continuously traverse a network
Mechanisms used to minimize routing loops include defining maximum hop count, holddown timers, split horizon, route poisoning and triggered updates

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

30

Summary
Conditions that can lead to routing loops include
Incorrectly configured static routes

Incorrectly configured route redistribution

Slow convergence Incorrectly configured discard routes

How routing loops can impact network performance includes:

Excess use of bandwidth CPU resources may be strained

Network convergence is degraded

Routing updates may be lost or not processed

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

31

Summary
Routing Information Protocol (RIP)
A distance vector protocol that has 2 versions RIPv1 a classful routing protocol RIPv2 - a classless routing protocol

Enhanced Interior Gateway Routing Protocol (EIGRP)

A distance vector routing protocols that has some features of link state routing protocols
A Cisco proprietary routing protocol

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

32

ITE PC v4.0 Chapter 1

2007 Cisco Systems, Inc. All rights reserved.

Cisco Public

33