Scribd
Upload
1K views

Microcontroller Based Automatic Railway Gate Control

This document proposes an automatic railway gate control system using microcontrollers. It describes using a sensor set including an IR sensor, sound sensor, and thermal sensor to detect approaching trains. When a train is detected, the microcontroller closes the gate, provides warning signals, and only opens the gate once the train has passed. The system aims to increase safety by reducing human errors and wasted time at unmanned railway crossings compared to manual operation. It provides advantages like accident prevention and reliable operation without gatekeepers.

Uploaded by

Atchyuth Sonti
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF or read online on Scribd
1K views

Microcontroller Based Automatic Railway Gate Control

This document proposes an automatic railway gate control system using microcontrollers. It describes using a sensor set including an IR sensor, sound sensor, and thermal sensor to detect approaching trains. When a train is detected, the microcontroller closes the gate, provides warning signals, and only opens the gate once the train has passed. The system aims to increase safety by reducing human errors and wasted time at unmanned railway crossings compared to manual operation. It provides advantages like accident prevention and reliable operation without gatekeepers.

Uploaded by

Atchyuth Sonti
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 21

Microcontroller based Automatic railway gate control

By: Sonti Atchyuth

Agenda
Present

Scenario. Automatic railway gate system. Schematic diagram. Detailed description. The sensor set. Working of the sensor set. Microcontroller Algorithm Flow chart Advantages Disadvantages

The Present Scenario


Generally the railway crossings are of two types

1.Manned 2.Unmanned

A lot of time is wasted due to this particular system. Many errors occur due to the manual operation of the entire system.

The Real time example

The Automatic railway gate


The arrival and departure of trains is done by the

sensor set. The automatic railway gate has two main advantages:
1. The reduction of time for which the gate is being kept closed. 2. To provide safety for the road users by reducing the accidents as there is no scope of human errors in this case.

The Schematic diagram

The Detailed Description


Initial Signal Display Train Arrival Detection Warning for Road Users Sensing For Vehicles Gate Closing Operation Signal For Train Train Departure Detection Gate Opening Interrupt

The Sensor Set


A sensor

set is used in all these places instead of a single sensor. set consists of the following sensors: 1.) An IR sensor. 2.) A Sound sensor. 3.) A Thermal sensor.

The sensor

Working of the Sensor set


All

the above 3 sensors are ANDed together and they form a single sensor set. the entire set, we need to trigger all the above sensors.

So to trigger

The reason why we go for this type of sensor set

is to make it triggered only by a train thus this increases the reliability of the system.

Microcontroller
This forms the brain of the entire system. Atmega 328 using arduino platform is used for the programming of this logic.

Microcontroller Atmega 328 performs the complete operations of Sensing Closing of the gate Opening of the gate operation done by software code written on the controller.

Arduino

Arduino IDE

Algorithm
1:

Make initial settings of the signals for the train and road users.

2:

Check for the arrival of the train in either direction by the sensors. If the train is sensed go to 3 otherwise go to step 2. Make the warning signal for the road users and set the signal for the train. Check for the presence of any obstacle using sensors. If no obstacle, go to step5 otherwise repeat step4.

3:

4:

Algorithm contd
5: Close the gate . 6: 7:

Change the signal for the train.

Check for the train departure by the sensors. If the train sensed to next STEP. Otherwise repeat STEP 7. Open the gate. Go to STEP 3.

8: 9:

Make the initial settings for train & road users

Flow Chart

If arrival of train in either of directions

Buzzers & signal warnings to road users

Set the signal for train

If obstacl es Stop warning & close the gate

If train depart ure Open the gate

Advantages
Prevention of

accidents inside the gate.

Reliable machine, which operates

the railway gate even without gatekeeper which makes it useful for operation at unmanned crossings. is

Power supply for the motor operation and signal lights

required.
Battery which is

charged by means of a solar cell can be used in remote areas where the power supply cant be expected.

Advantages of the microcontroller


Cheap Open source hardware and software Easy learning curve Extensible

Disadvantages
To

establish the entire network it is quite a costly task. Since these are the issues of the government cost doesnt matter a lot. Arduino board is a delicate device so it has to be handled carefully.

The

Conclusion
Avoids

manual errors & provides ultimate safety to road users. not necessary and automatic operation of the gate through the motor. mechanism works on a simple principle.

Gatekeeper

The

Queries??????

You might also like