Abstract
Abstract
SMS Alerting System for LPG detection This project is microcontroller based project. A Gas sensor is used to detect dangerous gas leaks in the kitchen or near the gas heater. Ideal to detect dangerous gas leaks in the kitchen. Sensor can be easily configured as an alarm unit. The sensor can also sense LPG and Coal Gas. Ideal sensor for use to detect the presence of a dangerous LPG leak in your car or in a service station, storage tank environment. This unit can be easily incorporated into an alarm unit, to sound an alarm or give a visual indication of the LPG concentration. The sensor has excellent sensitivity combined with a quick response time detected is messaged to the authorized person using cellular network called GSM. In this project there are mainly two units, GSM modem and microcontroller unit.GSM modem can be configured by standard GSM AT command set for sending and receiving SMS and getting modem status. Depending upon the Gas sensor output microcontroller can send message to the authorized person and also depending upon the message received the microcontroller unit will control the devices and acknowledges the device status to the user as SMS.
ABSTRACT
Wireless Load Controller GSM controller is a low cost solution to Remote Control and Monitoring via your mobile phone. It has 2 relay outputs and 4 contact closure inputs. Outputs can be used to control lighting, central heating boiler, pumps etc and the inputs can be connected to thermostats, security sensors and flood detectors. An optional wireless interface allows communicate with an expanding range of security and fire sensors, heating thermostats for temperature control and panic switches.
GSM based Home Automation System The goal of the project is to develop a system, which uses Mobile technology that keeps control of the various units of the home appliances, which executes with respect to the signal sent by the mobile. For utilization of appliances the new concept has been thought to manage them remotely by using GSM, which enables the user to remotely control switching of domestic appliances. Just by dialing keypad of remote telephone, from where we are calling we can perform ON / OFF operation of the appliances. The ranges of appliances that can be controlled through remote systems are many in numbers. Some of them are as follows and this depends upon the usage priority of the appliances i.e. Lights, Music System or other electrical / electronic appliances.