Bill of Quantities Pkg-2

Package-2: Arand-Lakhna Summary Sheet of Bill of Quantities Part-I & Part-II
Name of Work: Construction of Roadbed, Major & Minor bridges, Track Linking (excluding supply of rails, ordinary track sleepers and thick web switches), Outdoor Signaling and Electrical (General) works in connection with Doubling of LAKHANA(Ex) ARAND(in) section(68.936 Kms) part of RAIPUR-TITLAGARH Doubling in SAMBALPUR Division of East Cost Railway in the states of ODISHA & CHATTISGARH, India.
S.No.
Description of Part-I and PartII Total amount of Part-I Total amount of Part-II Total Amount of Part-I & II
Total Cost as per quoted amount (In words)
Total Cost as quoted amount (In figures)
1 2
Package-2 : Arand - Lakhna Summary Sheet of Bill of quantities , Part-I

Sr. No
1 1 2A 2B 2C 3 4A 4B 5A 5B 6 7B 8 10
Description of Schedule
2 Earthwork in Formation Bridge work (Other than Steel works) Bridge work (Steel items Involving Fabrication and Erection) Bridge work (Supply of Steel items ) Ballast Supply P.Way Supply (Other than steel items) P.Way Supply (Steel Items) Permanent Way Linking: Installation Works Permanent Way Linking: Supply and Installation Works Buildings Platform, Passenger Amenities and Miscellaneous Works : Steel items Supply of Cement S &T (Supply & Installation) In Figures 3
Total cost in Rs.

In Words 4
Total Amount of Part-I (Carried forward to summary sheet of Bill of Quantities Part-I & II)
Package:2 Arand - Lakhna

Summary Sheet of Bill of quantities, Part-II
Sr. No. 1 1 2A 2B 4A 4B 5A 5B 6 7A 7B 9 10 11 Description of Schedule 2 Earthwork in Formation Bridge work (Other than Steel works) Bridge work (Steel items Involving Fabrication and Erection) P.Way Supply (Other than steel items) P.Way Supply (Steel Items) Permanent Way Linking: Installation Works Permanent Way Linking: Supply and Installation Works Buildings Platform, Passenger Amenities and Miscellaneous Works : Other than Steel items Platform, Passenger Amenities and Miscellaneous Works : Steel items Site Facility S &T (Supply & Installation) General Electrical works Estimated cost in Rs. 3
20,754,029 9,061,272 6,776,575 17,230,464 9,329,858 47,453,127 1,817,926 42,387,541 113,608,095 984,913 19,025,230 33,869,358 42,149,386 364,447,774
Total Amount
______ %age Above/Below / At par over estimated Rates (in figures and words Total Amount of Part-II (Carried forward to summary sheet of Bill of Quantities, Part I & II (Amount in figures) TOTAL Amount of Part-II (Amount in words) NOTE: Tenderer should quote a single percentage for all schedules of Part II in the space provided above
Package-2 : Arand - Lakhna Bill of quantities , Part-I

BILL No.1 : EARTHWORK IN FORMATION
S.No. 1001 Description of Item Earthwork in filling in formation including trolley refuges, etc using contractor's earth of approved quality procured from outside railway land including site clearances, setting out and demarcation, benching, initial compaction of subsoil after leveling the surface after site clearance, spreading loose earth in 30 CM layers using grader up to extra width of 0.5 M beyond designed profile, compaction using vibratory compactors so as to achieve minimum in situ dry density of 98% of MDD, top and side dressing and removal of extra earth from sides to provide final formation as per designed profile. The rate shall include cutting of trees with girth upto 60 CM , making good the pockets and depressions left in soil during clearing and uprooting of jungle/trees at site and one round of heavy rolling of sub-soil there after. The rate shall not include cutting of trees of girth beyond 60 CM and compaction which shall be paid seperately. Earthwork in cutting in formation, trolley refuges, side drains, yard drains, catch water drains, etc. including leading usable cut spoils up to 200 M and making formation in filling using the cut spoils, site clearances, setting out and demarcation, disposing off surplus unusable cut spoils as per directions of the engineer, and top and side dressing to provide final formation as per designed profile. The rate shall not include cutting of trees with girth above 60 CM and compaction, which shall be paid separately. Soil excluding rock. Rock not requiring blasting. Rock requiring blasting. Rock requiring blasting, but blasting not permitted hence to be excavated by chiselling . Incremental rate for every Km or part thereof over item 1002 for leading cut spoils beyond 200 M for making formation in filing. Providing and laying blanketing materials of grading as per latest guidelines of RDSO in layers of 30 CM in loose state using graders and compaction using vibratory compactors so as to achieve minimum in situ dry density of 98% of MDD, top and side dressing to provide final formation as per designed profile. The rate shall not include compaction, which shall be paid separately. Turfing with sods, 10 CM thick and 20 CM square closely laid, including dressing, repair to rain cuts and watering as required until turfing is properly rooted. Payment to be released in two stages: (i) 50% on completion of turfing; and (ii) balance 50% after proper rooting of the turf. Supply & Planting of trees in railway land of varieties such as Shisham, Neem, Pilkhan and other indigenous varieties suitable to the area in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering inlcuding cost of labour and materials as per direction of Engineer-in-charge and maintaining the plants for one year. 1. Payment for surviving trees after three months of plantation - 25% 2. Payment for surviving trees after six months of plantation - 25% 3. Payment for surviving trees after one year of plantation - 50% Total for Bill No.1 (Carried forward to Summary of Part-I) 351448 75310 50207 25103 1732326 Cum Cum Cum Cum Cum Km Qty Unit Rate in Rs. Amount in Rs.
307975
Cum
1002
1002 a 1002 b 1002 c 1002 d 1003 1004
658517
Cum
1006
210227
Sqm
1009
3447
Each

BILL No.2 : BRIDGES Schedule 2A Bridge work (other than steel items)
S.No. 2003 2004 2005 Description of Item Providing and laying cement concrete 1: 3: 6 in foundation and floor using well graded stone aggregate of 40 MM nominal size. Providing and laying design mix control concrete M20/M25 in piers, retaining walls, wing walls, return walls, bottom/top plug of wells and protection work etc. using well graded stone aggregate of 40 MM nominal size. Providing and laying Design mix control concrete M25/M30/M35/M40 in RCC works of raft, pile cap, pier, abutment, well stening, RCC well kerb, well cap, pier cap, Jacketing, dirt wall, return wall, wing wall, fly wing wall, retaining wall, approach slab, foot path slab, wearing course, ballast retainers, RCC railing, inspection platform, pedestal, boxes and other miscellaneous works using well graded stone aggregate of 20 MM nominal size. Providing precast/cast-in-situ post tensioned PSC girders including diaphragms and deck slab with design mix control concrete M45/M50 including sheathing, anchorages, bearing plates, permanent wedges, positioning of strands in sheathing as per profile, stressing and distressing, grouting, launching precast girders in position, etc. Note: 1. Rate excludes cost of HTS strands (their placement in sheathing, stressing and grouting), sheathing, anchorages, TMT bars and cement, which shall be paid separately under relevent items. 2. Payment for precast girders shall be released in two stages: (i) 75% on casting and stressing of girders; and (ii) 20% after launching precast girders in position and casting of deck slab; and (iii) balance 5% on completion in all respects. Providing and laying dry stone backing behind abutments, wing walls, return walls, RCC boxes with stones not less than 15 CM in any direction and not less than 15 KG (except smaller boulders required for filling voids) in weight. Providing and laying backfill material behind boulder filling of abutments, wing walls, return walls consisting of granular materials of GW, GP, SW groups as per IS 1498-1970 in required profile . Providing and laying 300 MM thick dry stone pitching in flooring, exposed slopes, etc. with boulders of not less than 30 KG each in weight, hand packed with surface levelled off to the correct section with hammer dressing as necessary including filling the gaps with quarry spalls. Providing IPN coating (developed by CBRI) on PSC girders, slabs and other structures as directed by the Engineers Boring and installing reinforced cement concrete cast-in-situ bored piles in M30/M35 design mix control concrete using well graded stone aggregate of 20 MM including boring in all kinds of soil, boulders and gravels (length of pile for payment shall be measured up to the bottom of pile cap. No payment shall be made for boring and concreting from ground level to bottom of pile cap level.) 1200 MM dia pile Driving of Contractors unserviceable rail by hammering with the help of monkey hammer or by an other means in to soft or medium hard strata with all Contractor tools and plants, equipments, labour, lead, lift ascent, descent etc complete as per approved drawing and as directed by the Engineer. Note : 1. The payment of Rail will be made for the finished length buried in the ground Total of Bill No 2A (Carried forward to Summary of Part-I) 1200 Meter Qty 703 11695 Unit Cum Cum Rate Amount
12879
Cum
2006
1230
Cum
2012 2013 2014
6422 17236 4938 4950
Cum Cum Cum Sqm
2015 2019
2019a NS-2
267
Meter

BILL No.2 : BRIDGES Schedule 2B Bridge work (Steel items Involving Fabrication and Erection )
S.No. 2051 Description of Item Supply of Pre-stressing cables of required size and configuration of low relaxation high tensile steel strands (class-II) confirming to IS:14268. The rate includes cost of sheathing, anchorages, placing of strands placing of the strands in HDPE sheething of required diameters and of ID specification as per IRS, as per profile, stressing & destressing and grouting complete as directed by Engineer. Note: The quantity of prestressing cables provided in permanent work excluding wastages shall only be measured for payment and payment shall be made after the quantity is consumed in the relevant item. Total for Bill 2 B (Carried forward to Summary of Part-I) Quantity Unit Rates in Rs. Amount in Rs
40
MT

BILL No.2 : BRIDGES Schedule 2C Supply of Steel items
S.No. 2061 Description of Item Supplying TMT Fe-500 reinforcement steel conforming to IS:1786-1985 including decoiling, straightening, cutting, bending, placing in position, binding with 1MM dia GI binding wire. Note : Reinforcement, shall be measured in length for different diameters used in the works and then paid as per standard weights as per IS 1732. Wastages, overlaps, coupling, welded joints, space bars, chairs and binding wire shall not be measured and cost of these items shall be deemed to be included in the rates. Total for Bill 2 C (Carried forward to Summary of Part-I) Quantity Unit Rates in Rs Amount in Rs
1675
MT

BILL No.3 : BALLAST SUPPLY
S.No. Description of Item Quantity Unit Rate in Rs. Amount in Rs 3001 Supply of machine-crushed stone ballast on cess as per RDSO specifications for track ballast: IRS-GE-1 of June, 2004 from outside railway limits stacked in specified quantities alongside the proposed alignment on either side of track, in yards and at locations as per site requirement as directed by the Engineer. Note: a) Payment will be made on actual stack measurement for gross quantities without any deduction for voids in following stages: (i) 95% on receipt at site, acceptance, measurement, account, proper storage and protection against loss, damage or deterioration; and (ii) balance 5% after training out. b) Wherever suficient Railway land is not available, contractor will have to arrange land for supply & stacking of Ballast at his own cost for which nothing extra will be paid. c) The rate alo includes levelling, dressing of ground for stacking of ballast. 3002 Supply of machine-crushed stone ballast in depot as per RDSO specifications for track ballast: IRS-GE-1 of June, 2004 from outside railway limits duly stacked. Note: a) Payment will be made on actual stack measurement for gross quantities without any deduction for voids in following stages: (i) 95% on receipt at site, acceptance, measurement, account, proper storage and protection against loss, damage or deterioration; and (ii) balance 5% after training out. b) Wherever suficient Railway land is not available, contractor will have to arrange land for supply & stacking of Ballast at his own cost for which nothing extra will be paid. c) The rate alo includes levelling, dressing of ground for stacking of ballast. Total for Bill No.3 (Carried forward to Summary of Part-I) NOTE Quantity under item 3001& 3002 may vary as per site conditions and variation clause is applicable on overall quantity of item 3001 & 3002 combined together.
173,334
Cum
30,000
Cum

BILL No.4 : PERMANENT WAY SUPPLY Part 4 A: P.WAY SUPPLY (Other than Steel Items)
S.No. 4003 Description of Item Supply of Switch Expansion Joints with all fastenings and fixtures complete (excluding liners, ERC, fish plates, fish bolts and nuts) including angle iron for fixing on PSC sleepers and painting. "Rails will be issued free of cost by the Employer @ 2x13 M rail for each SEJ set which comprises of two stock and two tongue rails". For 60 KG as per RDSO Drawing No. T -4165/5478/5586/5748/6227/6263 For 52 KG as per RDSO Drawing No.T-4160/6039 Supply of Special Prestressed Concrte Sleepers for B.G. (Monoblock Sleepers) for 1 in 12 Turnouts for B.G 60 Kg. (UIC) rail/52 kg rails to RDSO Drg. No. T-4218 Alt-5 (for general layout) and drawings there of with latest alterations if any. Specification : as per drawing. Supply of Special Prestressed Concrte Sleepers for B.G. (Monoblock Sleepers) for 1 in 8.5 Turnouts for B.G 60 Kg. (UIC) rail/52 kg rails to RDSO Drg. No. T-4865 Alt-5 (for general layout) and drawings there of with latest alterations if any. Specification : as per drawing. Supply of Special PSC Monoblock Sleepers (pre-tensioned type) for B.G. Turnouts for 1 in 8 Derailing Switch as per RDSO Drg. No.-T-6068 to suite both 52/60 kg rails as per RDSO Design and IRS Specifications No. T-45-96 (2nd Edition) as amended from time to time. Total for Bill No.4 A (Carried forward to Summary of Part-I) Payment Conditions for items of this Bill: 90% payment shall be made on receipt, acceptance, accountable and taking into custody of complete materials including stacking of materials as per IRPWM and / or Railway guidelines issued by Railway 1 from time to time at noinated locations. The invoices shall be accompanied by the following: a. b. Supplier's challan and manufacturer's challan. Inspection certificate issued by Employer's/Engineer's nominated inspecting agency. 46 20 58 Set Set Set Quantity Unit Rate in Rs Amount in Rs
4003 a 4003 b NS-1
NS-2
Set
NS-3
Set
c. Comprehensive Insurance policy for the supply. d. Quality Assurance documents. e. 2 Indemnity bond for entire cost of material supply. The remaining 10 % payment shall be made after commissioning of the portion of the work or handing over of the material to the employer's / Railway's Representative, required for maintenance purposes.

BILL No.4 : PERMANENT WAY SUPPLY Part 4 B: P.WAY SUPPLY (Steel Items)
S.No. 4021 4021 a 4021 b 4021 c
NS-12
Description of Item Supply of P.Way Components ERC to RDSO Drg. No.T-3701 ERC "J" to RDSO Drg. No.T-4158 Metal Liners to RDSO Drg No. T-3740 Supply of 52 KG 1 in 8 6400mm OR Switch conforming to RDSO's Drg. T-4866 with latest alteration, if any complete with all parts as listed in the drawing excluding fish plates, fish bolts & nuts, Plate screws, GRSPs, Liner and ERCs. Supply of 52 KG 1 in 8 Derailing Switch conforming to RDSO Drg No. 5836 with latest alteration, if any complete with all parts as listed in the drawing excluding fish plates, fish bolts & nuts, Plate screws, GRSPs, Liner and ERCs. Supply of 52 kg CMS Crossing for 1 in 8 PSC Layout conforming to Drg No. T-4867 with latest alterations complete with C.I. Distance Block, Packing Pieces, MS Tapered Washers, Single Coil Spring washers, Check Blocks and bolts of different sizes and other fittings listed in the drawing excluding Fish Plates and Bolts. Supply of 60 kg CMS Crossing for 1 in 12 PSC Layout conforming to Drg. No.T-4220 with latest alterations complete with C.I. Distance Block, Packing Pieces, MS Tapered Washers, Single Coil Spring washers, Check Blocks and bolts of different sizes and other fittings listed in the drawing excluding Fish Plates and Bolts. Total for Bill No.4B (Carried forward to Summary of Part-I)
Quantity
Unit
Rates in Rs
Amount in Rs
526275 7270 402225 4
Each Each Each Set
NS-14
Set
NS-7
Nos
NS-6
64
Nos
Payment Conditions for items of this Bill: 1 90% payment shall be made on receipt, acceptance, accountable and taking into custody of complete materials and stacking as per IRPWM and/or Railway guidelines at nominated locations. The invoices shall be accompanied by the following: a. Supplier's challan and manufacturer's challan. b. Inspection certificate issued by Employer's/Engineer's nominated inspecting agency. c. Comprehensive Insurance policy for the supply. d. Quality Assurance documents. e. Indemnity bond for entire cost of material supply. The remaining 10 % payment shall be made after commissioning of the portion of the work or handing over of the material to the employer's / Railway's Representative, required for maintenance purposes.

BILL No.5 : PERMANENT WAY LINKING Schedule 5A : Installation Work
S.No. 5006 Description of Item Installation of BG track as per methodology specified in para 4.0 of Section 5: Specifications in the Bidding Documents or any other methodology approved by the Employer in all locations e.g. straight, curves, bridges, level crossings, yards, etc including installation of SEJ and glued joints including installation and dismantling of auxiliary track. Flash butt welding of 60 KG, 52 KG rails and panels, as per manual for flash butt welding of rails 1996, in track or out side track, in depot or in mid section for making panels including removing and refixing the fittings, creating required gap by pulling the rails, handling of rails. Ultrasonic testing of welded joints shall be paid separately. Loading/unloading of Clints P.Way material of all types to/from any type of Rly. Wagons, truck, trailor etc. Total for Bill No.5A (Carried forward to Summary of Part-I) Quantity Unit Rates in RS. Amount in Rs.
75121
Track Meter
5013
10434 10120
Each MT
NS-20

BILL No.5 : PERMANENT WAY LINKING Schedule 5B : Supply and Installation works
S.No. 5041 Description of Item Welding of rails by SKV thermit process in track under traffic block for conversion to SWR, LWR, CWR including finishing the joints using grinders. Ultrasonic testing of welded joints shall be paid separately. 1844 1308 Total for Bill No.5B (Carried forward to Summary of Part-I) Each Each Quantity Unit Rates in Rs. Amount in Rs.
5041 a 60 KG rail 5041 b 52 KG rail

BILL No.6 : BUILDINGS
S.No. 6004 Description of Item Supplying and fixing pre-cast RCC platforms fencing as per Railway plan along with posts at various stations with RCC M-20 (20mm and down gauge broken aggregate) involving casting of members in the casting yard (including all shuttering, cutting, straightening, bending and binding of reinforcement), curing leading and erection to true line, level and plumb including fixing posts in cement mortar as per drawing and two coats of snowcern complete with all labour, cement, steel and other materials. The fencing posts will be fixed in CC M-10. The rates are inclusive of all cement, steel etc complete. Quantity Unit Rates in Rs Amount in Rs
5135
Meter
TOTAL FOR BILL No.6 (Carried forward to Summary of Part-I)

BILL No.7: PLATFORM, PASSENGER AMENITIES AND MISCELLANEOUS WORKS Schedule 7B: Steel items
S.No. Description of Item Quantity Unit Rates in Rs Amount in Rs
7041 Providing FOB, platform shelters, columns, beams, trusses and other steel components of miscellaneous works duly launched in position with or without traffic block as directed by Engineer with contractors steel conforming to IS:2062-1999 including fabrication, assembly, erection, launching, riveting/welding, bolting, initial coats of zinc chromate priming conforming to relevant IS specification and three subsequent coats of aluminium paint of approved quality conforming to IS:2339 after final erection on all surfaces complete. TOTAL FOR BILL No.7 B (Carried forward to Summary of Part-I)
100
MT

Bill No.8 :-- Supply of Cement
SN ITEM OF WORK Quantity UNIT Rates in Rs Amount in Rs
8001 Supply of 43/53 grade cement OPC/PPC conforming to relevant IS specifications and using the same in the work as per RVNL's approved mix design as per RVNL's prescribed rates of consumption including all lead lift, labour, loading unloading, ascent, descent, crossing of Railway lines(s), royalty, taxes, transport (contractor's own), tools and plant complete.
438002
Bag
Total for Bill No. 8 (Carried forward to Summary of Part-I) Note: OPC or PPC cement has to be supplied as per requirement of the work in terms of RVNL standard specifications for material and works. Payment against supply will be made only after consumption of cement in the relevant items of work.

BILL NO:10-SIGNAL & TELECOM DEPARTMENT
SOR Description of Work S.N Item.No 37203 Supply of Outdoor signaling cable - 6 core x 1.5 sq.mm. in drum length of 1 Km. 1 37204 Supply of Outdoor signaling cable - 12 core x 1.5 sq.mm. in drum length of 1 Km. 2 37206 Supply of Outdoor signaling cable - 19 core x 1.5 sq.mm. in drum length of 500 mtr 3 4 5 6 7 8
37207 Supply of Outdoor signaling cable - 24 core x 1.5 sq.mm. in drum length of 500 mtr 37208 Supply of Outdoor signaling cable - 30 core x 1.5 sq.mm. in drum length of 500 mtr 38651 Supply of Railway underground jelly filled 6 Quad cable, 0.9mm dia. as per spec.No. TC/30/05 or latest for RE area. 38759 Supply of LED signal unit for main signal FOR RED/YELLOW/GREEN aspect 38801 Supply of DC Track circuit Equipment including battery charger, `B' type choke, adjustable Track Feed Resistance, QTA2 relay, QSPA1 relay, Fuse block, ND type fuses, 80 AH batteries etc. 38811 Electrical point operating machine - IRS Type,220 mm throw with lock & detector slides, Cable terminal box and Clamp lock arrangement with Ground connections for thick web switches 38821 Location box -Full Case complete with E type lock, Hylam sheet, Universal lock with key. Nos. 38851 Electrically operated lifting barrier assembly along with Dual tone warning bell (hooter) for LC Gate. 39651 Excavation of trenches at the depth of 1.0 Mtr. deep and 300 mm wide and back filling the trench after laying of cable with supply and fixing of cable route marker. 39802 Bonding of track circuits on track, track connections, installation, jumpering, charging of batteries, testing & commissioning of DC track circuits on track including supply of Fiber Glass track lead junction boxes, Nylon Insulation rail joints etc. 39901 Supply and installation of MAINTENANCE FREE EARTHING AND BONDING SYSTEM. Total for Bill No.10 (Carried forward to Summary of Part-I) Sets Kms. 246 11 92
Unit
Kms. Kms. Kms. Kms. Kms. Km. Nos Set
QTY
60 70 128 72 32 80 270 194
RATE (Rs.)
Amount (Rs.)
Nos.
60
10 11 12 13
Per Track Circuit
194
14
Nos.
86

Bill of quantities, Part-II BILL No.1 : EARTHWORK IN FORMATION
S.No. 1005 1007 Description of Item Mechanical compaction of earth and blanket materials in layers of 30 CM in loose state using vibratory compactors so as to achieve minimum in situ dry density of 98% of maximum dry density. Providing and erecting safety fencing by fixing minimum 75 MM dia 2.10 M long wooden bally posts at 3.0 M interval embedded in M10 cement concrete block of 45 CM x 45 CM x 60 CM (with Contractor's cement) and interconnected with five rows of 12 MM dia nylon rope of approved colour and quality and maintenance in proper position throughout the period of requirement. 2 bands (red and white) 300 MM long shall be painted on the ballies from top and 2 bands (100 MM apart) of yellow luminous tape of width 50 MM shall be pasted on top white band. After execution of all works requiring safety fencing in particular stretch, the fencing shall be removed with the approval of the Engineer and formation shall be repaired to its profile and released materials will be contractors property. Cutting down trees and uprooting of roots including transporting the wood to nearby railway store or forest godown as per direction of the engineer. Note: Clearance of trees with girth less than 60 CM and their clearance is covered under item No. 1001 & 1002. Girth will be measured at a height of 1 M above ground level. Girth above 180 CM and up to 270 CM Girth above 270 CM Total for Bill No.1 (Carried forward to Summary of Part-II) 1216 811 Each Each
1243.69 2473.23
Qty
966492
Unit Cum
Rate in Rs.
11.31
Amount in Rs. 10,931,025
68936
Meter
91.46
6,304,887
1008
1008 c 1008 d
1,512,327 2,005,790 20,754,029

Bill of quantities, Part-II BILL No.2 : BRIDGES Schedule 2A Bridge work (other than steel items)
S.No. 2001 2001 a 2001 b 2001 d 2008 2009 2010 2010b 2010d 2016 2017 Description of Item Earth work in excavation in foundation of bridges to desired profile including backfilling, compaction of back fill, and disposal of surplus earth as per directions of the Engineer. Soil excluding rock. Rock not requiring blasting. Rock requiring blasting, but blasting not permitted, hence to be excavated by chiselling. Providing and fixing elastomeric bearings as per specifications provided as per drawing. Providing and laying 40 MM expansion joint as per RDSO drawing No. B-1757R. Conducting deflection test of prestressed concrete deck with uniformly distributed static load as per clause 10.5 of IRS bridge code. 12.20 M PSC "I" Girder 24.4 M PSC box Girder Providing two coats of coal tar epoxy of 150 to 200 microns on R.C.C. substructures of bridges by roller or by airless spray after surface preparation. Providing and fixing bridge plaque (750 MM base, 720 MM height triangular section with 400 MM thickness) on both sides of parapet using cement concrete of specified mix including engraving bridge number, direction of flow and other details including painting the letters with enamel paint of black colour of approved quality with white back ground as per standards of railway as directed by the engineer. Providing and fixing river name boards of size 2.10 M x 1.0 M made of MS sheet 6 MM thick and ISA 50 x 50 x 5 MM frame all around, fixed on rail posts erected with railway's rails fixed in cement concrete base of size 60 CM x 60 CM x 75 CM of CC 1:2:4 including painting with two coats of paint of approved quality and colour over one coat of primer, writing the name of the river in vernacular and English in black colour with yellow back ground as directed by the engineer. Conducting load testing on single pile or on separate test pile in accordance with IS: 2911(Part IV) including installation of loading platform, kentlage, preparation of pile head, construction and dismantling of test cap, etc. Note: Boring and installing of test piles shall be paid under item No.2024. Initial vertical load test. Routine test. Providing and fixing of 100 MM dia PVC pipe for weep holes in abutments, wing walls, return walls, face wall, etc at suitable intervals as directed by the engineer. Providing and placing sand/earth filled bags in layers for protection of existing embankment. Total of Bill No 2A (Carried forward to Summary of Part-II) 2 1 24693 Each Each Sqm
52249.73 89263.85 145.81
Qty
Unit
Rate
Amount
15908 2326 717 1474800 90
Cum Cum Cum CUCM M
97.21 171.98 337.43 0.65 11029.46
1546417 400025 241937 958620 992651
104499 89264 3600486
108
Each
197.22
21300
2018
Each
3846.29
11539
2020
2020a 2020b 2025 2026
3 3 2301 3000
Each Each Meter Each
123193.46 92441.83 186.01 6.54
369580 277325 428009 19620 9061272

Bill of quantities, Part-II BILL No.2 : BRIDGES Schedule 2B Bridge work (Steel items Involving Fabrication and Erection )
S.No. 2041 2042 Description of Item Supply and installing Casing pipe of 6 MM thick MS sheet for bored piles as directed by the engineer. 600 2 Meter MT
11,029.46
Quantity
Unit
Rates in Rs.
Amount in Rs
2041a For 1200 MM dia pile Providing trolley/men refuges, inspection ladder, hand railing, other miscellaneous components made of GI pipe/structural steel conforming to IS: 226 bolted/welded construction including fixing on bridges as per drawing and painting with one primer coat of red lead paint conforming to IS: 102 or zinc chromate paint conforming to IS:104 (with total DFT of 160 microns). Work shall be carried out as per I.S. 800. Total for Bill 2 B (Carried forward to Summary of Part-II)
6,617,676 158,899
79,449.50
6,776,575

Bill of quantities, Part-II BILL No.4 : PERMANENT WAY SUPPLY Part 4 A: P.WAY SUPPLY (Other than Steel Items)
S.No. 4001 4001 a 4001 b 4001 c 4002 4002 a 4002 b 4004 4005 4006 4007 4008 4009 Supply of P.Way Components GFN Liners to RDSO Drg. No. T-3706. Combination GFN liners to RDSO Drg. No.T-3707 and T-3708. GRSP to RDSO Drg. No.T-3711. Supply of glued insulated rail joints G3 L 6.5 M long with 10 MM thick end post on PSC sleepers. Rails will be issued free of cost by the Employer @ 6.5 M for each joint. 60 KG rail section as per RDSO Drg No.RDSO/T-5843 52 KG rail section as per RDSO Drg No.RDSO/T-5361 Supply of Guard rails of 52 KG, 90 R rail sections for bridges including all fittings (excluding rail screw) required as per RDSO drawing. Rails will be issued free of cost by the employer. Supply of Check rails of 60 KG, 52 KG, 90 R rail sections for level crossings, curves, etc. on PSC sleepers including all fittings as per RDSO drawing. Rails will be issued free of cost by the employer. Supply of PSC sleepers for bridges with provision for guard rails as per RDSO Drawing No. T-4088 for 60 KG rail. Supply of PSC sleepers for bridge approaches with provision for guard rails as per RDSO Drawing No. T-4089 to T-4097 for 60 KG rail. Supply of PSC sleepers for level crossings as per RDSO Drawing No. T-4148 for 60 KG rail. Supply of PSC sleepers for SEJ as per RDSO Drawing No. T-4149 for 60 KG rail. Total for Bill No.4 A (Carried forward to Summary of Part-II) 294 264 1543 1754 713 38 984 66 Each Each Meter Meter Each Set Each Set
8674.59 7591.17 216.5 541.26 2056.79 20748.3 2038.75 13351.08
Description of Item
Quantity
Unit
Rate in Rs
Amount in Rs
114400 20035 249603
Each Set Each
7.22 23.45 19.85
825,968 469,821 4,954,620
2,550,329 2,004,069 334,060 949,370 1,466,491 788,435 2,006,130 881,171 17,230,464
Payment Conditions for items of this Bill: 90% payment shall be made on receipt, acceptance, accountable and taking into custody of complete materials including stacking of materials as per IRPWM and or guidelines issued by Railway from 1 time to time at nominated locations. The invoices shall be accompanied by the following: a. Supplier's challan and manufacturer's challan. b. Inspection certificate issued by Employer's/Engineer's nominated inspecting agency. c. Comprehensive Insurance policy for the supply. d. Quality Assurance documents. e. Indemnity bond for entire cost of material supply. The remaining 10 % payment shall be made after commissioning of the portion of the work or handing over of the material to the employer's / Railway's Representative, required for maintenance purposes. Note : The rate of PSC Special Sleeper, the transportation charges from Sleepers Manufacturing Plant to the supply point in the project area (as directed by Engineer) are inclusive. Item No. 5029 of Bill No. 5 is for the further movement of the sleepers , in the Project area if required as per the site conditions. 2

Bill of quantities, Part-II BILL No.4 : PERMANENT WAY SUPPLY Part 4 B: P.WAY SUPPLY (Steel Items)
S.No. 4021 4021 d 4021 e Supply of P.Way Components Supply of complete set of fittings and fastenings (excluding ERC. Liners, GRSP to Drg No.T-3711, fish plates, fish bolts and nuts) for 60 KG 1 in 12 turnouts to RDSO lay out Drg. No.T-4218 Supply of complete set of fittings and fastenings (excluding ERC. Liners, GRSP to Drg No.T-3711, fish plates, fish bolts and nuts)for 60 KG / 52 kg 1 in 8.5 turnouts to RDSO lay out Drg. No.T-4965 / T-4866. Supply of rail screws to RDSO Drg. No.T-1035/10675 Supply of Fish plates 60 KG as per Drawing No.T -1898 52 KG as per Drawing No. T- 090 (M) Supply of Combination fish plates (4 Nos. per set) as per Drawing No.T696 to T699 including nuts, bolts and washers. For 60 KG & 52 KG Rail Sections Supply of fish bolts with nuts for 60 KG, 52 KG rails as per RDSO Drawing No.T-1899, T-11501. Supply of joggled fish plates (2 No. per set) with 4 pair clamps, 4 No. Bolts & Nuts and 8 No. special washers. For 60 KG as per RDSO Drawing No.T -4016 For 52 KG as per RDSO Drawing No. EDO/T-620 Supply of Fish plates one meter long as per standard drawing of RDSO 60 KG rail (As per RDSO Drg.No T-5916 / T-5851 ) 52 KG rail (As per RDSO Drg.No T-5915 / T-5850 ) Supply of screw clamps for fish plates 464 32 952 Each Each Each
1452.38 1163.71 974.27
Description of Item
Quantity
Unit
Rates in Rs
Amount in Rs
58 9 14816 1116 806
Set Set Each Each Each
26160.90
1,517,332 166,437 427,738 1,343,999 611,488 -
18493.05 28.87 1204.30 758.67
4021 f 4022 4022 a 4022 b 4023 4023 a 4024 4025 4025 a 4025 b 4026 4026 a 4026 b 4026 c
246 4828
Set Each
9472.05 56.83
2,330,124 274,375 -
276 43
Set Set
3292.67 2580.01
908,777 110,940 673,904 37,239 927,505 9,329,858
Total for Bill No.4B (Carried forward to Summary of Part-II) Payment Conditions for items of this Bill: 90% payment shall be made on receipt, acceptance, accountable and taking into custody of complete materials and stacking as per IRPWM and/or Railway guidelines at nominated locations. The 1 invoices shall be accompanied by the following: a. Supplier's challan and manufacturer's challan. b. Inspection certificate issued by Employer's/Engineer's nominated inspecting agency. c. Comprehensive Insurance policy for the supply. d. Quality Assurance documents. e. Indemnity bond for entire cost of material supply. The remaining 10 % payment shall be made after commissioning of the portion of the work or handing over of the material to the employer's / Railway's 2 Representative, required for maintenance purposes.

Bill of quantities, Part-II BILL No.5 : PERMANENT WAY LINKING Schedule 5A : Installation Work
S.No. 5001 Description of Item Training out ballast from measured stacks along side track or on formation and putting the same into track uniformly to form profile as per IRPWM in following phases: (i) Laying of first layer to form level bed for sleepers with top surface dressed to an accuracy of 10 MM including mechanical compaction; (ii) Filling ballast in cribs and making up shoulders; and (iii) Recouping shortages after each packing and finally making profile as per IRPWM. Training out ballast from ballast depots by railway hoppers/wagons from measured stacks including loading into hoppers/wagons and unloading on linked track in regulated manner to recoup shortages including redistribution and dressing up immediately after unloading for safe passage of trains and finally making profile as per IRPWM. Cutting of 60 KG, 52 KG, 90 R rails true to square. Under traffic Block Without traffic block Drilling 26.5 MM, 32 MM diameter holes in web of 60 KG, 52 KG, 90 R rails in track or on cess at correct locations including chamfering. Transportation of rails, switches, crossings, etc. from point of issue to their final location of laying in track in correct direction of rolling mark. Average lead, from the place of issue upto the middle point of location of laying in each KM, upto 10 KM Incremental rate for lead beyond 10 KM under item 5005 (a) above Installation of PSC fan shape turnouts, derailing switches 60 KG / 52 KG including lead rails as per RDSO layout drawings including katcha packing with bars or off track tampers for 20 KMPH speed. Activities of rail cutting, drilling of holes, welding of joints and transportation are not included in this item and shall be paid separately under relevent items. Turnouts 1 in 12 Turnouts 1 in 8-1/2 Derailing switches Incremental rate over Item 5007 a, b, c for installation under traffic block including adequate lighting arrangements for night working. This also includes pre-assembling the turnout parts at suitable location & leading & inserting the same in track under traffic block. Turnouts 1 in 12 Turnouts 1 in 8-1/2 29 2 Each Each
18800.32 14867.60
Quantity
Unit
Rates in RS.
Amount in Rs.
173334
Cum
78.65
13,632,719
5002
30000
Cum
48.92
1,467,600 -
5003 5003 a 5003 b 5004 5005 5005 a 5005 b 5007
1496 1638 4828
Each Each Each
57.55 38.37 29.74
86,095 62,850 143,585 -
10120 242869
MT MT KM
235.96 4.80
2,387,915 1,165,771 -
5007 a 5007 b 5007 c 5008
58 4 9
Each Each Each
38559.84 36641.44 9208.32
2,236,471 146,566 82,875 545,209 29,735
5008 a 5008 b
S.No. 5008 c 5009 Derailing switches
Description of Item
Quantity 5
Unit Each
Rates in RS.
5467.44
Amount in Rs. 27,337
Slewing of B.G. track comprising 60 KG, 52 KG, 90 R rails on all types of sleepers to any density under traffic block upto a lateral slew of 150 MM or part thereof including removing and relocating existing ballast, packing with bars or off track tampers to achieve alignment, longitudinal levels and cross levels for running trains at a minimum speed of 20 KMPH on restoring traffic after the block and dressing up to correct profile. Incremental rate over item 5009 for slewing beyond 1st stage of 150 MM for each 100 MM or part thereof if done in the same traffic block Pre-tamping and post tamping works, reconditioning of tamping tools, and providing all consumables for first-round of packing by railway's heavy on track tampers and dynamic track stabiliser of straight/curved main line and loop line track, sidings, derailing switches, and turnouts. Note: 1. For the purpose of payment: a. Length of turnout assembly, measured from stock rail joint to heel of crossing, shall be multiplied by 1.5 for conversion to equivalent ordinary track; and. b. Derailing switches, bridges, level crossings, curves, etc shall be considered as ordinary track. 2. Transfer of machines from the existing running lines to the place of work and back to the running lines after the work is over shall be done at contract's expenses without payment of extra cost 3. Railways heavy on track machines along with crew/operator shall be made available without any hire charges. 4. 80% payment will be made if Dynamic track stabilser not used. Pre-tamping and post tamping works, reconditioning of tamping tools, and providing all consumables for second-round of packing by railway's heavy on track tampers and dynamic track stabiliser of straight/curved main line and loop line track, derailing switches, and turnouts for raising speed to sectional speed. Note: 1. For the purpose of payment: a. Length of turnout assembly, measured from stock rail joint to heel of crossing, shall be multiplied by 1.5 for conversion to equivalent ordinary track; and b. Derailing switches, bridges, level crossings, curves, etc shall be considered as ordinary track. 2. Transfer of machines from the existing running lines to the place of work and back to the running lines after the work is over shall be done at contract's expenses without payment of extra cost. 3. Railways heavy on track machines along with crew/operator shall be made available without any hire charges. 4. 80% payment will be made if Dynamic track stabilser not used. Anticorrosive painting of 60 KG, 52 KG rails for loops and platform lines. Painting to be done prior to installation on sleepers including touching of paints in areas damaged during fixing.
7512
Track Meter
101.68
763,820
5009 a 5010
3756
Track Meter
40.29
151,329
75121
Track Meter
20.14
1,512,937
5011
75121
Track Meter
13.43
1,008,875
5012
14545
Track Meter
40.29
586,018
S.No. 5014
Description of Item Provision of Buffer stop of 60 KG, 52 KG, 90 R rail section as per plan including painting with uminous paint etc. as directed by the engineer. Note:Rails required for this item will be issued free of cost by the Employer to the Contractor. De-stressing of LWR/CWR track with 60 KG, 52 KG rails at appropriate rail temperature as per LWR manual and as per directions of the engineer including adjustment of gap at SEJ, squaring & correct spacing of sleepers disturbed during the work. including greasing of ERC as per IRPWM. Payment for cutting of rails shall be made separately under relevant item. Laying of Sand humps / Snag dead ends as per RDSO standard drawing No: T-347 complete, with contractor's materials (excluding rails and PSC sleepers, fittings and fastenings which will be issued free of cost by the Employer within the Project area), machinery and labour. Sand hump will be treated as a complete item including laying of track beyond back of crossing, making brick channels, duly filled with clean sand including dressing/raising of earth work as per the requirement at site, complete as per the standard railway drawings and specifications. Lifting of track in stages of maximum 75 MM at a time under traffic block including making up formation and one round of katcha packing for getting required longitudinal and cross levels to make the track fit for 20 KMPH as per provisions in IRPWM Para 233 and as directed by the Engineer. (Rate will be for each stage lifting by 75 MM) . Lowering of track in stages of maximum 75 MM at a time under traffic block including removing ballast, cutting of formation and disposing of surplus cut spoils as directed by the engineer and one round of katcha packing for getting required longitudinal and cross levels to make the track fit for 20 KMPH speed as per provisions in IRPWM Para 234 and as directed by the Engineer. Existing ballast shall be put back into the track after screening without any extra payment and shortage of ballast will be recouped and paid for under the relevent item. (Rate will be for each stage of lowering by 75 MM). Painting of station number, super elevation and versine at each station of curve on the inside web of outer rail with stencils of specified height in black enamel paint on surface of specified length painted with two coats of yellow enamel paint over a primer coat painted after cleaning the surface free from dust and dirt. Supplying and fixing distance blocks of hard wood size 250x125x850 MM (length) between one side of rail of track and platform wall at 30 M interval along the length of platform including painting of distance block. Dismantling the existing gate posts with lifting barrier, whistle boards, road sign boards and re-fixing of gate posts, lifting barrier, whistle boards, road sign boards at new location along the proposed alignment of track at manned level crossings (including painting on barrier and posts, if required). Note: Concreting required for re-fixing shall be paid under relevant items On both sides. On one side only
Quantity
Unit
Rates in RS.
Amount in Rs.
16
Each
27337.20
437,395
5015
75
Track Km
14963.52
1,122,264
5016
10
Each
120187.76
1,201,878
5017
75121
Track Meter
20.14
1,512,937
5018
1352
Track Meter
163.06
220,457
5019
7512
Station
47.96
360,276
5020
495
Each
1170.22
579,259
5021
5021 a 5021 b
6 8
Level Xing Level Xing
17937.04 9304.24
107,622 74,434
S.No. 5022
Description of Item Dismantling of the existing gate posts, whistle boards, road sign boards and re-fixing of whistle boards, road sign boards at new location along the proposed alignment of track at unmanned level crossings (including painting on barrier and posts, if required). Note: Concreting required for re-fixing shall be paid under relevant items On both sides. On one side only Dismantling and removing of existing fencing at level crossing, leading and stacking of materials at nominated stores depot. Dismantling of existing BG track, turnouts, derailing switches, dead ends, sand humps, etc. of any rail section and any type of sleepers of any density under block or non block conditions and transporting all released material including sleepers, rails, switches and crossings to the nearest station or manned level crossing or road loading point as directed by the Engineer. Plain track Turnouts 1 in 12 Turnouts 1 in 8 1/2 Derailing switches Sand Humps complete with rails, sleepers and fastenings and fixtures and levelling the area. Scarifying, digging existing caked Ballast upto the depth as directed by the Engineer, removal and screening of Ballast, removal and disposal of muck, dressing of formation to the required profile and putting back the screen ballast in track. USFD testing of new 60 KG, 52 KG rails as per RDSO Manuals and submitting reports on proforma as directed by the Engineer. USFD testing of new 60 KG, 52 KG rail welds (Flash Butt / SKV) as per RDSO Manuals and submitting reports on proforma as directed by the Engineer. Transportation of PSC sleepers including special sleepers for SEJs, check rails, guard rails and turn out sleepers from the place of issue to their final location of laying. Note: 1. For the purpose of payment each turnout sleeper will be considered as 1.5 No. of ordinary line sleeper. All other special sleepers shall be considered on par with ordinary line sleeper. (2) 100% payment shall be made on transportion to designated site as directed by employer/engineer. (3) The item is intended for transportation of sleepers issued free of cost by the employer or supplied by the contractor in P.Way supply schedule in the project area. However, if the sleepers to be issued free of cost by the employer are made available at the sleeper plant and loading of sleepers is done by concrete sleeper plant even then the rate quoted in the item shall be applicable subject to recovery @ Rs.10/- per track sleeper. Average lead upto 2 KM (from place of issue to middle point of kilometre of laying in track)
Quantity
Unit
Rates in RS.
Amount in Rs.
5022 a 5022 b 5023 5024
11 16 588
Level Xing Level Xing Meter
10743.04 4987.84 59.47
118,173 79,805 34,968
2165 21 17 10 7 3093 Track Meter Each Each Each Each Per Track meter Rail KM Each
90.16 13716.56 11606.32 7865.44 11126.72 57.55
5024 a 5024 b 5024 c 5024 d 5024 e 5026
195,196 288,048 197,307 78,654 77,887 178,002
5027 5028 5029
150 13587
1342.88 41.25
201,432 560,464
5029 a
125127
Sleeper
43.16
5,400,481
S.No. 5029 b 5029c
Description of Item Incremental rate for lead beyond 2 KM for every km additional lead upto 30 kms over item (a) above Incremental rate for lead beyond 30 KM for every km additional lead upto 60 kms over item (a) &(b) above
Quantity 3503567 500510 500000 41
Unit Sleeper KM Sleeper KM Sleeper KM Level Xing
Rates in RS. 1.44 0.55 0.32

4028.64
Amount in Rs. 5,045,136 275,281 160,000 165,174
5029(d) Incremental rate for lead beyond 60 KM for every km additional lead upto 250 kms over item (a), (b) &(c) above 5030 Opening of road pavement at LC gate by breaking the pavement and removing the soil up to formation level to facilitate linking of track at LC gate and restoring road surface of movement of road traffic. Painting of particulars of 1 in 12 and 1 in 8-1/2 turnouts and derailing switches including turn in curves on the inside web of outer rail with stencils of specified height in black enamel paint on surface of specified length painted with two coats of yellow enamel paint over a primer coat painted after cleaning the surface free from dust and dirt. Fouling marks of size 150x250x225 MM in M20 grade cement concrete including engraving the letters FM, white washing with two coats and painting the letters in black enamel paint indicating the numbers of vehicles duly fixed at site. Maintenance of track after commissioning at normal sectional speed till track is handed over to the Railway by deploying 1 gang of 25 suitable persons headed by qualified P. Way supervisor. Attention to track to be done as per requirement to keep the track parameters within prescribed limits as per IRPWM for the sectional speed. Note: In case additional/less gang deployment is done as per direction of the engineer, the payment shall be appropriated proportionately Total for Bill No.5A (Carried forward to Summary of Part-II)
5031
71
Turn Out
671.44
47,672
5032
62
Each
412.46
25,573
5033
98
Week
27241.28
2,669,645
47,453,127

Bill of quantities, Part-II BILL No.5 : PERMANENT WAY LINKING Schedule 5B : Supply and Installation works
S.No. 5042 Description of Item Supplying and fixing Boards for LWR, curves, level crossings (W/L board, speed breaker board and Stop board) made of 16 gauge M.S. Sheet with ISA 40x40x5 MM frame and ISA 75x75x6 MM posts as per drawings duly painted and lettered with luminous paint. Supplying and fixing retro reflective engineering signal boards of various sizes as per specifications given in Annexure 8/4 of Para 807 & 808 of IRPWM, made of 2 MM thick aluminium alloy sheet conforming to IS:736 in proper size, shape, etc. with back support of ISA 25x25x3 MM. The entire face of the sign shall be covered with yellow high intensity encapsulated type retro-reflective sheeting with heat lamp vacuum machine. The rate includes cost of supply and fixing post made of ISA 75x75x6 MM and of height enough so that the bottom of boards are at 2.00 M above rail level and all nuts, bolts, rivets, washers etc. including after fixing in ground with 1:2:4 cement concrete base of 45x45x45 CM. Quantity Unit Rates in Rs. Amount in Rs.
410
Each
1153.92
473,107
5043
5043 a Caution indicator boards of size 1400x400 MM. The back portion of the board shall be provided with black secthal film on the high intensity sheet base. 5043b 5043c 5044 Speed indicator boards of size of 1 M equilateral triangle. The speed figures shall be cut out of black secthal film and provided on the base sheet with HLYA process. Termination indicator of size 1 M diameter with letters T/G. The words T/G, T/P & T/EMU shall be cut out of black secthal film and provided on the base sheet with ALVA process . Providing and fixing fencing at level crossing approaches as per the approved design and drawing made of MS flats 50x6 MM complete along with posts made of ISA 100x100x10 MM @ 3m centre to centre including casting of foundation in 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 MM nominal size) cement concrete blocks of size 400x400x600 MM and other incidental works as per direction of Engineer. Total for Bill No.5B (Carried forward to Summary of Part-II)
19 19 19
Each Each Each
4758.59 4027.68 4928.37
90,413 76,526 93,639
140
Quintal
7744.58
1,084,241 1,817,926

Bill of quantities, Part-II BILL No.6 : BUILDINGS
S.No. 6001 Description of Item Construction of service buildings at stations, in yards and in mid section as per layout drawing provided by the employer and detailed specifications provided in para 4.2 of section 5: works requirements of the bidding documents including preparation of architectural plan and structural design and drawings. Rate includes cost of cement steel and all other materials and labour. Quantity Unit Rates in Rs Amount in Rs
6001 a Service building of single storey (foundation to be designed to take load of double storey) with open foundation upto 1.2 m depth from ground level and plinth height upto 0.6m from ground level with floor height upto 3.35m. 6001 b Service building with double storey Note: No extra payment shall be made for resisting earth quake forces in Zone II and single storey building in Zone III & IV. 6001 e Extra payment for provision of internal sanitary and water supply installations 6002 Construction of residential buildings for staff accommodation near railway stations, level c crossings or any other nominated location as per layout drawings and standard railway plans for each type of staff quarters, provided by the employer and detailed specifications provided in para 4.3 of section 5: works requirements of the bidding documents including structural design and preparation of detailed structural drawings. Rate includes cost of cement steel, internal water supply and sanitary installations and all other materials and labour.
2073 428
Sqm Sqm
8859.22 8063.27
18,365,163 3,451,080
1778
Sqm
2146.01
3,815,606
6002 a Type I,II,III Single storeyed floor height upto 2.9 m 6002 e Type IV/Type V Single storeyed floor height upto 2.9 m 6002 i 6002 l Extra for every 0.3m additional height above normal height of 2.90 m Extra for every 0 .3 m or part thereof higher plinth over normal plinth height of 0.6m (on ground floor area only)
1313 85 130 130 130 130 130 28 120
Sqm Sqm SqM SqM SqM SqM SqM Each Each
7304.39 8336.62
9,590,664 708,613 19,876 19,876 37,944 409,317 57,097 2,539,996 1,211,993
152.89 152.89 291.88 3,148.59 439.21

90714.14 10099.94
6002 n Extra for open foundation on poor soils having bearing capacity less than 10T per SqM (on ground floor area only) 6002 o Extra for foundation on poor soils requiring under reamed pile of 6m long (on ground floor area only) . 6002 q Extra for making stronger foundations to take load of one additional floor at a later date (on area of additional floor only) 6003 6005 Construction of Water booths with granite cladding as per RVNL type plan. Providing precast RCC benches (chair type with back rest) as per RVNL drawing including fixing.
S.No. NS1
Description of Item Rain water harvesting-for recharging the natural ground by constructing infiltration gallery as per detailed drawing provided in specification for civil works. The work consists of supplying and laying 110 mm dia UPVC pipe of 10kgf/sqcm working pressure as per IS 4985, 100 m in length from roof of building to ground level and below ground level up to infiltration gallery as per site requirement including all specials, fittings, jointing materials and providing infiltration gallery duly excavating and filling with boulders, pebbles, aggaregates, sand, moorum and Netlon mesh as shown in drawinga vide item 7.9 Chapter 4 Section 6 of Technical Proposal provided at 4.3.6, constructing inllet chamber with brick masonary 11 cm thick in 1:5 CM and plastering with 1:6 CM including supply of materials, labour plants equipments etc. complete as directed by Engineer in charge. Size of Infiltration Gallery shall be based on rain Water Potential as per following: 25000-50000 litres 50000-75000 litres 75000-100000 litres 100000-125000 litres 125000-150000 litres 150000-200000 litres Exrta/deduction for PVC pipe under item NS1 for 110mm PVC pipe over/below 100m
Quantity
Unit
Rates in Rs
Amount in Rs
a b c d e f NS 2
19 11 7 3 1 1 1
each each each each each each m
46445.19 50546.10 55696.08 61990.50 67426.59 78298.77 280.39
882,459 556,007 389,873 185,972 67,427 78,299 280
NOTE
42,387,541 TOTAL FOR BILL No.6(Carried forward to Summary of Part-II) In case of construction of laboratory block seperately constructed for the pessengers in station premises, the polyeurethane tanks sintax or equivalent are also to be provided with all plumbing works for storage of water. Similarly, all loilets are to be provided with push/lever type flush arrangement. Rates are inclusive of all such connected works.

Bill of quantities, Part-II BILL No.7: PLATFORM, PASSENGER AMENITIES AND MISCELLANEOUS WORKS Schedule 7A: Other than Steel Items
S.No. 7001 Description of Item High level PF wall with precast RCC counterfort segments with design mix control concrete M30/M35 including transportation, hoisting and placing in position segments along with coping, excavation in trenches, laying of concrete bedding as per drawing, back filling of trench, ramming, joining of segments complete as per RDSO drawing No. MA 10870. Low level PF wall with precast RCC wall segments with design mix control concrete M25/M30 including transportation, hoisting and placing in position segments, excavation in trenches, laying of concrete bedding as per drawing, back filling of trench, ramming, joining of segments complete as per drawing. Cement Concrete 1:2:4 (cast in situ/pre cast ) for Rail level platform wall, coping of platforms, drains and in other miscellaneous works. Earth work in filling with contractor's earth of approved quality in platform, circulating area, level crossing and other areas including all lead and lift in layers not exceeding 30 CM in depth including mechanical compaction and watering to achieve the desired compaction as per specifications. Earth work in cutting in foundation, trenches, drains, etc in all kinds of soil including dressing of sides, ramming of bottoms, back filling of trenches, getting out the excavated soil and disposal of surplus excavated soil with all lead and lift as directed by the Engineer. In all kinds of soil In ordinary rock Hard Rock (requiring blasting) 42445 6622 219 1863 1221 Cum Cum Cum Cum Cum
97.21 171.98 277.61 337.43 1757.24
Quantity
Unit
Rates in Rs
Amount in Rs
904
Meter
1397.38
1,263,232
7002
9944
Meter
1085.19
10,791,129
7003 7004
27372
Cum
1863.79
51,015,660
35798
Cum
101.22
3,623,474
7005
4,126,078 1,138,852 60,797 628,632 2,145,590 1888 32741 1525 Sqm Sqm Cum Sqm
638.40 395.38 2673.24 233.68
7005 a 7005 b 7005 c
7005 d Hard Rock ( blasting prohibited) 7006 7007 7007a 7007b 7007c 7007d Cement Concrete 1 : 3 : 6 in foundation and floor. Providing platform surfacing using ; Kota stone 25 MM thick on 20 MM cement mortar (1:4) bed including grinding, rubbing and polishing. Interlocking pavement blocks 100 MM thick over sand bed of 75 MM including edge restraints for confining the blocks as per RDSO drawing #M-00003. Vacuum dewatered cement concrete 100 MM thick of M25 finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc complete. Bricks on edge of class designation 75 over sand bed of 65 MM including filling of joints by sand.
1,205,299 12,945,137 4,076,691 -
S.No. 7008
Description of Item Providing water bound macadam sub-base 100 MM thick as per profile for road, circulating area, etc using stone aggregate of 90 MM to 45 MM size as per specifications including rolling of subgrade with all materials complete. Providing water bound macadam bearing course 75 MM thick as per profile using 50 to 25 MM stone aggregate of for road, circulating area, etc with stone aggregates as per IRC specifications including rolling in stages to proper grade and camber with all materials complete. Providing 40 MM premix carpet surfacing with 10-12.5 MM nominal size stone aggregate @ 5.4 COM per 100 Sqm and 54 kg hot bitumen per COM of stone aggregate complete with paving asphalt 80/100 heated and then mixed with solvent @ 70 Gms per KG of asphalt. The rate also includes tack coat using hot straight run bitumen of grade 80/100 @ 0.75 KG per SQM and preparation of the existing road surface as per specifications. Providing seal coat of premixed fine aggregate (passing 2.36 MM and retained on 180 micron sieve) with bitumen using 128 KG of bitumen of grade 8500 per Cum of fine aggregate and 0.60 Cum of fine aggregate per 100 Sqm of road surface including rolling and finishing with road roller complete. Providing bitumen penetration macadam with hard stone aggregate of specified size and grading and with bitumen of suitable penetration grade including consolidation with road roller complete. For 50 MM compacted thickness using coarse aggregate of size 40-20 MM graded and key aggregate of size 12.5 MM graded. For 75 MM compacted thickness in two layers using stone aggregate of size 63-41 MM graded and key aggregate of size 20 MM graded. Providing and fixing pre-painted galvanised sheet 0.6 MM thick with corrugated or trafford design on previously erected purlins or wall frame work for roofing. The colour coating shall be polyester coating over hot dipped galvanised sheet and the sheets will be of minimum high tensile strength of 275 MPa variety. The fixtures used for fixing the sheets shall be as per manufacturerer's specifications. Measurement shall include area of MS sheet, valley gutter, ridges etc excluding overlaps. The rate includes provision of 110 MM dia PVC rain water pipes, j bolts & other fixtures, painting of station name on both ends of COP in tri-lingual format.
Quantity
Unit
Rates in Rs
Amount in Rs
16205
Sqm
96.27
1,560,055
7009
16205
Sqm
78.51
1,272,255
7010
11344
Sqm
191.61
2,173,624
7011
11344
Sqm
37.39
424,152
7012 7012a 7012b 7017
11344 11344 Sqm Sqm

224.33 317.80
2,544,800 3,605,123
2120
Sqm
534.65
1,133,458
7018 7018a 7018c 7018d 7018e
Providing GI pipes including laying & jointing with all fittings making connections to water hydrants including connection to source along with excavation & refilling. etc. complete. (External Water supply only) 15 MM Dia 25 MM Dia 40 MM Dia 50 MM Dia 3600 1283 363 8 Meter Meter Meter Meter
95.34 159.83 224.33 285.08
343,224 205,062 81,432 2,281
S.No. 7019 7020
Description of Item Providing RCC station name board including fixing, painting and letter writing. Providing heavy duty Interlocking pavement blocks 150 MM thick made of cement concrete M35 or richer grade at level crossings laid on sand bed of 75 MM over 300 MM well compacted granular sub base of well graded stone aggregate of 40 MM and down size and toe walls/edge restraints around the periphery for confining the blocks. Providing and fixing NON-asbestos, high impact poly-propylene reinforced cement corrugated sheets 6 MM thick in roofing including provision of valley gutters, ridges etc as per requirement, fixing with polymer coated J or L hooks, bolts and nuts 8 MM dia. G.I. plain and bitumen washers complete excluding the cost of purlins, rafters and trusses. Brick work with bricks of class designation 75 for miscellaneous works in: Cement motor 1 : 6 (1 cement : 6 coarse sand) Dismantling work including removal and disposal of dismantled material outside railway boundary as directed by the Engineer. Dismantled material will be removed by the contractor at his own cost and the same will become the property of the contractor. Note: Measurement will be done before dismantling the structure. Water bound macadam/Bituminous road Cement concrete R.C.C. work Brick work/stone work Dismantling steel structures and taking away dismantled materials as property of the contractor. Dismantling AC sheet roofing and taking away dismantled materials as property of the contractor. Providing and fixing chequered terrazzo tiles 22mm thick with graded marble chips of size 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing including laying on 20 mm thick bed of cement mortar of 1:4(1Cement: 4Coarse Sand): medium shade using 50% white cement and 50% ordinary cement.
Quantity 24 8610
Unit Each Sqm
Rates in Rs
8001.03
Amount in Rs 192,025 5,062,077
587.93
7021
220
Sqm
299.10
65,802 -
7022 7022a 7023
89
Cum
1873.14
166,709
7023 a 7023 b 7023 c 7023 d 7024 7025 7026
102 1012 102 1696 2 50
Cum Cum Cum Cum MT Sqm
230.87 373.88 547.73 346.77
23,549 378,367 55,868 588,122 -28,041 -234
-14020.50 -4.67
1320
Sqm
558.95
737,814
TOTAL FOR BILL No.7 A (Carried forward to Summary of Part-II)
113,608,095

Bill of quantities, Part-II BILL No.7: PLATFORM, PASSENGER AMENITIES AND MISCELLANEOUS WORKS Schedule 7B: Steel items
S.No. 7042 Description of Item Manufacturing, supplying, installation and commissioning of 6-10 M long non-interlocked lifting barriers on either side of road passing through the level crossing within Railway limits with all accessories viz booms, fringes, boom loading device arrangement with its rod run and complete ground fitting, vertical wheel, diversion wheel, steel wire rope with its accessories pedestals, trunion bracket, LB drum, mechanical warning bell arrangement, night light, three lever frame etc complete including painting with fluorescent paint. Excavation & concreting of foundation will be paid separately. Providing single faces stove enamelled MS benches 1830x457x490 MM as per approved drawing complete. Providing India mark III hand pump (as per IS:13056-1991) with 25 M GI riser B class of 65 MM dia and 63 MM dia PVC suction pipe up to 5 M depth and 3 M long PVC ribbed screen 63 MM dia including packing with pee gravels and development. Quantity Unit Rates in Rs Amount in Rs
Set
206007.88
412,016
7043 7044
84 10 100
Each Each Meter
4869.79 15,495.46 88.80
409,062 154,955 8,880 984,913
7044a Incremental rate over item 7044 above for every 1 M or part thereof PVC suction pipe beyond 5 M depth TOTAL FOR BILL No.7 B (Carried forward to Summary of Part-II)

Bill of quantities, Part-II Bill No.9 : Site Facilities
SN 9001 ITEM OF WORK Providing site offices for Employer with Contractor's material, Labour, Tools and Plant, Equipment etc. including provision of Water Supply, Drainage, Power arrangements, office maintenance as per the details mentioned in clauses 3.1 to 3.2.8 & 3.5 to 3.5.2 of Chapter 3 (Site Facilities for the Employer and the Engineer) of Section 5 (Work's Requirement) of Tender Documents. Note 1: This item is provided with the contention that new site offices will be constructed for this purpose and 75% payment of the accepted rates will be made after making available functional office, balance 15% payment shall be made at the end of the completion period and the remaining 10% will be paid after clearance of site by the contractor . Note 2: Alternatively if suitable accomodation is available on hire basis at suitable location acceptable to the employer, the contractor can arrange the same under the item but in such a case the payment shall be regulated as below . (a) 10% payment shall be made on completion of one month from the date of making available the office fit for functioning. b) Remaining 90% payment shall be paid in equal monthly instalments that is (0.9xQuoted rate) / (Stipulated Completion period in months + defect liability period in months). In case stipulated period gets extended on any account no additional payment shalll be made for the item. Quantity UNIT Rates in Rs Amount in Rs
181
Per Sqm. of Plinth area
9543.98
1,727,460
9002
Providing Furniture as given under clauses 3.3, 3.3.1 of Chapter 3 (Site Facilities for the Employer ) of Section 6 (work's Requirement) of Tender Documents. Note : Payment shall be made @ 75% of the accepted rate after making available the furniture items in functional office, balance 15% payment shall be made at the end of the completion period and the remaining 10% will be paid after clearance of site by the contractor. Providing Road Vehicle mentioned below for the use of Engineer/Employer as per the Conditions mentioned in Clause 3.4.3, i.e. 3.4.3.1 to 3.4.3.3 of Chapter 3 (Site Facilities for the Employer and the Engineer) of Section 6 Work's Requirement) of Tender Documents. Tavera , Innova or similar Tata Sumo, Bolero/Scorpio or similar Extra for running and maintenance of every additional km over and above kms included under item 9003 (a) Extra for running and maintenance of every additional km over and above kms included under item 9003 (b) Total for Bill No. 9 (Carried forward to Summary of Part-II)
L S Per Site Office
741280.00
741,280
9003
Vehicle months Vehicle months Per Km Per Km 5,020,319 11,519,491 9,270 7,410 19,025,230
9003 a 9003 b 9003 c 9003 d
126 336 1000 1000
39843.80 34284.20 9.27 7.41

Bill of quantities, Part-II
BILL NO:10 SIGNAL & TELECOM DEPARTMENT
S.N 15 16 17 18 19 20
SOR Description of Work Item.No 38657 Supply of Metal free Optical Fibre Cable 24 fibre as per TEC Generic requirement No. GR/OFC-01/04 Sep. 2003 with latest amendment in drum length of 3 km. 38702 Supply of DWC pipe of size 120 mm outer dia & 102 mm inner dia. 38703 Supply of SPLIT DWC pipe of size 200 mm outer dia & 175 mm inner dia. 38704 Supply of Galvanized Iron pipe 100 mm dia `B' class with end clamps 38705 Supply and jointing of Quad cables with thermo shrinkable jointing kits. 38751 Supply of Colour light signal (2 aspect) having following items : (a) Signal post (b)Signal base C I 140 mm dia. (c )CLS ladder complete with platform and signal front staging (d)CLS unit 2 aspect (e)Anchor bolt with nut washer , Universal lock with key etc 38752 Supply of Colour light signal (3/4 aspect) having following items : (a) Signal post (b)Signal base C I 140 mm dia. (c )CLS ladder complete with platform and signal front staging (d)CLS unit 3 aspect (e)Anchor bolt with nut washer Universal lock with key etc 38753 Supply of Junction type route indicator (1 way) along with OFF set bracket and universal lock with key. 38754 Supply of Junction type route indicator (2 way) along with OFF set bracket and universal lock with key. 38756 Supply of Independent shunt signals complete with post, surface base, Position light shunt signal unit,Anchor bolts universal lock with key.etc. 38758 Supply of Calling on signal along with unituniversal lock with key. 38760 Supply of LED signal unit for junction type route indicator/ shunt/ calling-on. 38812 Electrical point operating machine - IRS Type,143 mm throw with lock & detector slides, Cable terminal box etc with suitable ground connection. 38822 Location box - Half Case complete with E type lock, Hylam sheet, Universal lock 38824 Supply of Phoneix contact modular Terminal block 4 conductor test - disconnected type, type: UDK-4-MTK-P/p with test & measurement facility with screw type clamp suitable for 1.5 sq.mm to 2.5 sq.mm conductor with current carrying capacity of 16 amp as per RDSO spec. no. RDSO/SPN/189/2004 with end plate guide rail en stop & zack strip marker. 38901 Supply of office furniture set for relay room consisting of chairs, office table, Airy revolving & tilting cushion chair, steel Almirah, steel tool, of Godrej make. 38902 Supply of Electronic magneto telephone desk type 38903 Various types of markers as:-AP/C/G/A/IB markers 38904 Tools for testing - Digital multimeter of fluke make- 1no, Digital Clamp type AC & DC Ampere Meter - Fluke make- 1no. 38905 Maintenance tool kit complete as per list attached. Unit RATE (Rs.) QTY AMT (Rs.)
Km. Mtrs. Mtrs. Mtrs. Nos Nos.
54954.04 170.94 212.97 738.87 3670.08 26485.47
17 6400 8200 1054 36 32
934218.68 1094016.00 1746354.00 778768.98 132122.88 847535.04
21
Nos.
31418.45
52
1633759.40
22 23 24 25 26 27 28 29
Nos. Nos. Nos. Nos. Unit Nos. Nos.
19732.86 23020.89 8400.36 2608.94 4620.06 54915.74 10866.39
6 8 12 12 120 24 126
118397.16 184167.12 100804.32 31307.28 554407.20 1317977.76 1369165.14
Nos.
54.78
22500
1232550.00
30 31 32 33 34
Nos Nos Nos. SET Nos.
39897.28 2167.11 494.14 5885.76 73988.19
17 62 66 17 17
678253.76 134360.82 32613.24 100057.92 1257799.23
35 36 37 38 39 40 41 42 43 44 45 46 47 48
39307 Design and Development of OUTDOOR SIGNALING DRGS FOR ONE NEW PI/EI/RRI STATIONS
Per station
89246.00 24840.00 46417.00 33.00 27181.00 3726.00 2417.00 35204.00 10130.00 3131.00 4653.00 10871.00 4103.00
7 1 16 1054 7 420 12 7 105 12 194 72 12
624722.00 24840.00 742672.00 34782.00 190267.00 1564920.00 29004.00 246428.00 1063650.00 37572.00 902682.00 782712.00 49236.00
39309 Design and Development of OUTDOOR SIGNALING DRAWINGS FOR ONE IBH / ONE MIDSECTION LC Per Station GATE / C CLASS STN 39652 Excavation of cable trench of 1 m. depth & 300 mm. wide across the track crossing, road crossing, level crossing, platform & refilling. 39654 Perforation and Fixing of GI pipes on girder bridges, RCC bridges, drains, culverts, rocky places tunnels/deep cutting. 39655 Fixing/ laying of DWC/RCC pipes 39656 Laying of signaling / power / telecom / quad/OFC cable of various sizes in trench and pipes. 39657 Placing of half round ( Split DWC ) pipe over the laid cable in open trenches 39659 Testing of point to point insulation / continuity test for all laid out cables, Measuring Parameters and preparing the records 39751 Excavation of pit, casting & plastering of concrete foundation for C.L.Signal and for signal ladder. Erection and wiring of complete signals along with supply of Signal number plate ,wiring material etc. 39752 Excavation of pit, casting & plastering of concrete foundation for Shunt .Signal and for signal ladder. Erection and wiring of complete signals along with supply of Signal number plate ,wiring material etc. 39801 Fixing & wiring of track circuit equipment in location box/Gumties including supply of wiring materials.. 39811 Installation, wiring, testing and commissioning of point machine including supply of wire, GI bend pipe, insulation sets etc.. 39812 Excavation & Pulling out the old cable from existing point machines, insertion of old & additional new cable through GI bend pipe wiring, testing and commissioning of point machine. Kms. Mtrs Kms. Kms. Kms. Stn./IBH Signal Signal Per Track Circuit Per Point machine Per Point machine
39821 Excavation of pit, casting of concrete foundations for Location Box-single Caseerection of location box, supply of universal lock with key, Lamp holder 2pin with switch, wiring material, wiring, testing and commissioning. Location box 39821 Excavation of pit, casting of concrete foundations for Location Box-single Caseerection of location box Half case , supply of universal lock with key, Lamp holder 2pin with switch, wiring material, wiring, testing and Location box commissioning. 39823 Wiring in Existing Location box. 39851 Design fabrication & supply of LC Gate indication panel 39852 Installation, wiring, testing and commissioning of Electrical/Mechanical Lifting Barrier including supply of key transmitter as per requirement. 39903 Supply and Installation of various boards like BSLB/GWB/SLB boards/Calling-on boards 39904 Supply and Installation of Earth electrode & connection of Earth with equipments. 39905 Supply and Fixing of RE Protective Screens on signals Nos Per Gate Nos. Per earth Nos.
6732.00
246
1656072.00
49
3911.00 805.00 3476.00 12763.00 11969.00 2007.00 1812.00 2345.00 27701.00 7907.00
126 12 11 11 52 200 52 12 6 1
492786.00 9660.00 38236.00 140393.00 622388.00 401400.00 94224.00 28140.00 166206.00 7907.00
50 51 52 53 54 55 56 57 58
39906 Provision of temporary Goomtis for NI working including Provision of Public Address system complete with Goomti days Microphones, speakers etc in the yard during Non Interlocking work. 39951 Painting, Letter writing , Numbering Termination particulars overall Indoor and Out door Gears at complete STATION including LC Gate. 39952 Painting,Letter writing / Numbering Termination particulars - IBH/ MID SECTION INT LC GATE/Auto hut etc. Station IBH/LC Gate/ Auto Hut
59 60 61 62
39961 Release of complete indoor and outdoor equipment from stations/IBH/LCgates and Transportation to the S&T IBH/LC depot Gate/ Auto Hut 39962 Shifting/ lifting of existing location boxes/ signals/Track lead boxes, junction boxes etc along with foundation to adjacent place to facilitate earth work/ clearing infringement etc at stations including IBH, LC gates etc. Station 39963 Loading, unloading and transportation of Signal and telecom materials. 10111 Excavation of trench 1.65 Mtr deep 300 mm wide at the bottom along Railway line in soft Rock/ Murram/Hard soil including cleaning of bushes etc including morrum soft rock hard soil mixed with boulders etc, this work include back filling trenches by excavated soil and ramming after laying required quantity HDPE pipe and cable as per schedule and instructions of Engineer in charge of site. (Note: Proportionate payment will be made in case of less depth, but in no circumstance less than 1.2 Mtr) 10113 Location survey of cable route and preparation of tentative and final cable route plan as per approved format in the section including supply of final route plan after the cables are laid and commissioned indicating clearly the exact position of of cable joints and other critical items with reference to central line of the nearest track in 06 No of hard bound copies on white bound paper of A-3 size (well documented and bound with plastic covers) and soft copy of complete drawing on CD 10114 Supply of 300 AH capacity low maintenance batteries as per IRS 88/93 - Set of 24 No. at each station with required Nos of porceilin insulators. 10115 Transportation and Derivation joint with 2T transformer: jointing of six quad jelly-filled cable using thermoshrinkable jointing kit. This includes tapping of nominated quad at a specified location shown by Engineer using miniature tapping transformer of 470 : 1120 ohm impedance ( to be housed in the joint) The other end of the transformer should be connected to 10 pair jelly filled u/g telecom cable (Supply of cable is covered under a separate item) which has already laid in the trench for this jointing purpose. After jointing, joint shall be filled up with C Compound mixed with Harderner. All the materials required for the work are to be arranged by the Contractor except Thermoshrinkable jointing kit, 2T transformer assembly and C-compound, which are covered under supply portion of the schedules. After jointing the cable thorough test such as insulation test, continuity test, etc. to be carried out jointly with Engineer. If any defect or damage observed during jointing, the contractor should redo the joint free of cost. 100 TKM
59847.00
418929.00
16973.00 364.00
30 1000
509190.00 364000.00
KM
98488.00
98488.00
63
Km
1405.00
67
94135.00
64 65
Set
72490.40
72490.40
Nos.
1121.00
70
78470.00
66
10116 Transportation and Straight through joint with out transformer: installation of straight through joint as directed by engineer at site or joint without transformer for LC gates, pump house etc. The derivation joint includes tapping of nominated quad of 6 quad cable at specific location as indicated by engineer at site without using transformer to 10 pair PIJF cable already laid in the ground. All the materials required for the work are to be arranged by the contractor except Theromo-shrinkable jointing kit, Y and C- compound, which are covered under supply portion of the schedules. After jointing the cable thorough test such as insulation test, continuity test etc., to be carried out jointly with Engineer. If any defect or damage observed during jointing, the contractor should redo the joint free of cost. 10118 Supply of 2 MB programmable primary digital drop insert multiplexer with conference facility as per specifications IRS:TC/68/2004 with latest amendments & other stipulations of tender document fully wired for 30 channels complete with power supply unit, remote control supervision facility & all other accessories installation materials, manuals etc. It should have facility to accomodate data interface cards in multi drop mode & should be able to support card needed for video conference.
Nos.
1121.00
70
78470.00
67
No.
64153.09
64153.09
68
10119 Supply of VHF transreceiver set simplex, 25 watt similar to Kenwood model no. TK 7100 or motorolla make for way station (SM/ASM office) with base antenna 6.5 db omni directional, mode CP-22E and 30 meter RG-213 coaxial cable with connectors at both ends. This shall also include the power supply unit cum charger model BM100 or similar. 10120 Krone type MDF suitable for 200 Pairs complete with Integrated Protection Modules complete with latest specification. It shall be approved by RVNL. 10121 Supply of 42U 19" covered racks for housing SDH and P-Mux equipments, DDF, FMS,.MDF using krone module etc. complete with all fittings, wired and equipped with integrated protection modules for all channels and adequate numbers of cooling fans, AC/DC power supply distribution panels, U-Link panels and other hardwares like runway, ladders etc. It should be possible to lock all the equipments with only order wire telephone remaining outside the rack. The rack should be of APW President/Rittal make. The compoents of the rack are specified below. The components of the rack is specified below 10122 Supply and Installation of rack mounted 24F FMS fibre part No. fms-1u 24FS 24 FP Raychem make including 24 Nos 0.2 db FC/PC adaptors and 24 numbers 900 micron 1.5 meter FCPC pigtails. RDSO Spec No. : RDSO/SPN/TC-037-2000(ver.3) or latest. 10123 subscriper loop interface cards (6 circuits per card). 10124 ISDN interface (Two BRI Ports per card) 10125 Spare 2000mAH Ni-Mh Battery suitable for above VHF set, 5 watt 10126 Transportation and making of of OFC joint enclosure and splicing of Optic fibre cable (24 fibres) and testing as per technical specification No. GR OJC-2/02 Sept 2003. All materials including Fusion splicing machine used for fibre splicing and, OTDR for testing and other teting materials if any shall be arranged by the Contractor. 10127 Supply of Jelly filled underground telecom. Cable 0.5mm dia, 50 pair as per specn.No. IRS:TC-41/97. 10128 Fabrication,transportation, installation and fixing of emergency socket post of 50 mm GI pipe with base plate, box and emergency socket and wiring as per the approved drawing. Arrangement of fabrication shall be as per DRG no. DRM/S&T/RTM/2007/1. These emergency socket posts to be fixed along the cable route at every kilometre as directed by Engineer at site. This involves termination of 10 pair jelly-filled cable on the 6-pin emergency socket fixed in the emergency socket box fixed on the post supported on Rail. The post should be concreted at its base and painted with alternate black and white colour. all material for fabrication including 50 mm GI pipe to be arranged by contractor except supply of EC box with socket which is covered under supply portion and NG Rail which will be supplied by RVNL, however rails are to be cut to proper size before erection of post. 10129 Exchange loop interface cards (6 circuits per card). 10130 Supply of Emergency Socket Box to RDSO drawing No. 15220 with socket six pin flat to RDSO Spec No. IRS: TC. 42/87. Amdt. 1 or latest. 10131 Supply of 48 volts SMPS Power plant for exchange 10132 Excavation of trench 1.65 MTR deep 300 mm wide at the bottom along Railway line in all types of normal soil including cleaning of bushes etc. This work include back filling trenches by excavated soil and ramming after laying required quantity HDPE pipe and cable as per schedule and instructions of Engineer in charge of site.(Note: Proportionate payment will be made in case of less depth, but in no circumstance less than 1.2 Mtr)
No.
20277.12
60831.36
69 70
Set
30299.15
60598.30
No.
30241.34
60482.68
71 72 73 74 75
No. No. No. No.
19795.38 24830.26 23315.30 1864.56
3 2 2 20
59386.14 49660.52 46630.60 37291.20
Nos.
4893.00
14
68502.00
76 77
Km.
111214.96
778504.72
Nos.
1549.00
25
38725.00
78 79 80 81
No. No. No.
18939.26 1325.93 52620.69
2 25 2
37878.52 33148.25 105241.38
KM
62740.00
38
2384120.00
82
10133 Transportation and Initial charging of lead acid low maintenance batteries This includes : Supply of sulphuric acid to approved specification, distilled water. Preparation of electrolyte. Charging & discharging of batteries ( 3 cycles). - 2 V 300 amp hours. 10134 Excavation of Jointing pit and provision of joint chamber of 1.2 meter dia. of 60 cm height with 2- piece cover on top and bottom cover with holes for drainage (reinforcement drawing will be as per technical specification). This includes water cooling of chamber, backfilling and ramming of the trench after cable laying and consolidation of soil as well as disposal of soil as per plan as advised by site engineer. 10136 Supply of OFC Splice Enclosure (24 fibre) of TVS/raychem/REPL make as per broad specification of TEC, Spec No. GR OJC-2/02 September, 2003 or latest 10137 Supply of FRP cable route and joint indicator as per drawing No.RE/Tele/22/83A 10138 Valve Regulated Lead acid cell 12V/60 AH as per specification IRS: S:93/96A for VHF set 10139 Supply of Electronic magneto telephone desk type as per specn.No.IRS :TC79/2000.with latest amendment 10140 Supply, installation and fixing of 3 meter, 50 mm dia. GI pipe on station roof and fixing the same on the parapet wall with suitable clamps or as approved by engineer, laying of feeder connector, mounting, of VHF antenna and wiring to connect the 25 watts VHF sets upto ASM's room. 10141 Girder/Cement Bridge: Transportation and Fixing of perforated G I Pipe for entry of cables, on girder bridges,RCC bridges,drains,culverts,rocky places, tunnels/deep cutting of places & as advised by site engineer& concreting the ends with brick channalling at both ends as per drg. This includes trenching up to the required depth as decided by the site engineer , the pipes are to be fixed on the girder bridge by suitable fixtures at an interval of 1 meter as per approved drawing . On masonary bridges or in rocky area GI pipes are to be provided with masonary of size 300 mm x 300 mm at intervals of 2 meters. All material (G I pipes,nuts&bolts clamps material for construction piollars MS Channel,flexible DWC pipe etc)will be supplied by the contractor As per drawing no RE/42/172A & RE/S&T/ALD/SK/160/81 and RE/S&T/ALD/SK/104/01A
Battery
1158.01
24
27792.24
83
Nos.
2913.38
14
40787.32
84 85 86 87 88
No. No No. No.
2599.56 119.29 6594.79 1856.30
14 200 3 10
36393.84 23858.00 19784.37 18563.00
Set
6059.83
18179.49
89
Meters
58.00
400
23200.00
90 91 92 93 94 95
10142 Painting of telephone mark with indicating the direction of the nearest Emergency socket on the OHE mast 10143 Testing of fibres between short haul stations in both directions, by splicing the required fibres 10147 Supply of C compund with Harderner 10148 Supply of PSU (wall mounted 12 V, 7AH fully charged maintenance free valve regulated sealed lead acid stationary battey along with battery charger as per RDSO Specn.72/97 for driving 4 wire DTMF way side control equipmrnt complete 10149 Supply of 4 wire way station equipment as per Spec. no. TC. 38/97 or latest. 10150 Transportation and Installation and wiring of Primary Drop insert MUX with all accessories, surge and lightning protection arrangements, FDF, ladder runway etc. This includes installing optical Pig tails, optical patch cords etc. to the STM-1 equipment from Primary MUX equipment. This also includes installing all interface cards in the Primary MUX and extending 48V bus supply wires and running PVC switch board cable over riun way to Krone type DP with all surge and lightening protection complete for 30 circuits derived from primary MUX covered earlier. This also includes testing, commissioning of the Primary MUX, documenting and supplying the test results. (Commissioning of Desk Top terminals as per Tech.spec. is considered as part of this item)
KM LS Kg set No.
286.00 6350.00 448.71 8833.74 4332.91
67 3 30 2 3
19162.00 19050.00 13461.30 17667.48 12998.73
Nos.
14478.00
14478.00
96 97 98 99 100
10151 Supply of steel almirah - office storwel of Godrej make or equivalent model of same make.Size 1980 x 915 x 486 approx with 4 shelves making 5 compartments without locker having locking door. 10152 Supply of FCPC to SCPC 10 meter long patch cords with 0dB adaptors as per TEC spec G/OJC-01/03 Jan 99 or latest. 10154 Supply of 20 pair Krone terminal complete with mounting arrangements with box. The item shall be supplied from DOT/BSNL approved firsm only. 10155 Supply of portable Emergency telephone 4 wire as per spec. no. IRS TC:75-99 with latest amendment 10156 Supply of ultra isolation transformers 230 VAC/230VAC-1.5KVA with MOVR protection on either side to provide "x"protection and supply of crow bar suege protection circuit for 48 V DC side to providr "y"protection 10157 Office table of model no T9 of Godrej or equivalent model of same make. with 3 drawers on left hand side & one locker on the right hand side. Olive brown/green with duplicate keys. 10158 Supply of 20 pair 0.5 mm switch board cable to RDSO Spec. IRS.TC.24-91 10159 Supply of 100 pair Krone terminal complete with mounting arrangements with box. The item shall be supplied for DOT/BSNL approved firms only. 10160 Supply of VF Tapping Transformer to RDSO Spec. No. IRS.TC-22-76 of type 470:1120, 600:470, 600:1120. exact break up to be decided in consultation with engineer 10163 Transportation and Installation,testing and commissioning of 48 V battery set ,battery chargers and ultra isolation transformers and its wiring with paramite wire supplied under supply schedule. This includes installation of necessary fuses etc,. Note: Before installation of batteries contractors has to ensure that batteries are fully charged, 10166 Supply of Paramite battery wire 51 strands each of 0.75 mm dia (Equal quantity of Red and Blue) 10167 Supply of 150 mm dia. RCC pipe in standard lengths of 2 meters with collars as per spec. No. IS:458, NP2 Clasue, as protection to HDPE ducts and 6 quad cable below culverts/bridges/TSS/SP/SSP. 10169 Supply of Switch board cable 10 pair , 0.5 mm for indoor wiring. 10170 Office chair of model no CH-1007 of Godrej or equivalent model of same make. 10171 Supply of 3.5 digit multimeter of Fluke make 10172 Supply of Permanently lubricated HDPE pipe 40/33mm as per TEC specification no. G/CDS-08/02 Nov. 2004 with latest amendment if any, suitable for armoured 24 fibre OFC Cable including its accessories like plastic couplers, end plugs, cable sealing plugs ,end caps etc.as per requirement. 10173 Installation and commissioning of 4 wire way station equipments, power supply unit at SP/SSP/Station/TSS/AEN/PWI/SI offices/Residences. The installation of way station equipment and power supply unit (supply covered under a separate item) shall be mounted on a MS angle rack. All the materials for installation, commissioning of 4 W equipment and power supply unit shall be provided by contractor. 10175 Supply of PVC wire coil of size 3/0.75 sq. mm(each coil of length 100 meters) to RDSO Spec. IRS:S-76/89 Amdt. No.2 ( or latest) 10176 Rotary duct cutter for cutting the duct (with replaceable blades) 10178 Supply of theromoshrinkable jointing kits as per RDSO Spec. No. IRS. TC77-2000/Amdt.1 ( or latest) for derivation joints with 2T tranformer, suitable for 6 quad cable
No No. No. No. No
11266.93 1112.13 1089.19 1631.49 10818.50
1 10 10 6 1
11266.93 11121.30 10891.90 9788.94 10818.50
101 102 103 104 105
No Mtr. No. No.
10562.75 74.33 2692.24 633.14
1 100 3 12
10562.75 7433.00 8076.72 7597.68
Set
5645.00
5645.00
106 107 108 109 110 111
Mtr. Meters Mtr. No No Km.
51.39 105.52 22.02 2816.73 2520.65 41952.67
80 30 100 1 1 40
4111.20 3165.60 2202.00 2816.73 2520.65 1678106.80
112
Locn
2623.00
2623.00
113 114 115
No. No. No.
833.18 825.84 2305.00
1 1 70
833.18 825.84 161350.00
116 117 118
10179 Supply of theromoshrinkable jointing kets as per RDSO Spec. No. IRS. TC77-2000/Amdt.1 ( or latest) for Normal (Straight joint) joints without transformer suitable for 6 quad cable 10181 4 wire, E&M, VF interface cards (8circuits per card). 10182 Supply of 48V SMPS Power Plant for TELECOM EQUIPMENT with FR/FC Modules as per SPEC.NO.RDSO/SPN/TL/23/99(VER.3) with Amendment no.1, 48 volts, 25 amps in N+1 configuration i.e. 2 modules of 25 amps, with automatic switching between the modules. 10183 Supply of VHF transreceiver simplex for mobile 5 watt. similar to Kenwood model no. TK 2170 or motorolla make with rechargeable 2000mAH battery. This will include suitable battery charger. 10185 Transportation of OFC,and Blowing of Optic fibre cable into the duct by using blowing machine and associated works. Before blowing the duct integrity shall be tested. If any defect is found during duct integrity test, the HDPE duct is required to be attended and integrity to be tested from one chamber to another chamber by the contractor at his own cost. 10186 Transportation and Laying of various sizes of cables in trenches: Laying of quad cable,PIJF cable of different size in the excavated trench. This includes loading/unloading & transportation of cables to site. Whenever several cables are to be laid separation of cables should be as advised by site engineer. This includes unwinding of cable drum using proper jigs without causing damage to cable. 10187 Supply of Jelly filled underground telecom. Cable 0.5mm dia, 5 pair as per specn.No. IRS:TC-41/97. 10189 Supply of managed Expandable Rack type STM-1 ADM L 1.1 as per technical specification no. TEC GR No. GR/SDH-04/02 Mar 02 with amendment 1,2,3 &4 or latest with STM-1 aggregate interface, 21 E1s and 4 nos. of 10/100 Base T Ethernet port order wire, power supply unit, sub-rack installation material and accessories manual etc. The equipment should be fully wired for its ultimate capacity and provide redundancy for power supply and synchronisation & other details as given in Chapter 3 (Model - TJ100MC1)
No. No. No.
2115.07 25000.01 49527.46
70 4 2
148054.90 100000.04 99054.92
119 120
No.
15732.25
20
314645.00
KM
8890.00
40
355600.00
121
KM
3726.00
40
149040.00
122 123
Km
68249.25
477744.75
No.
138332.79
138332.79
124
10190 Transportation and Wiring installation and testing of Magneto Telephone at L C gates/ ASM Office as per site requirement.Wiring of Magneto telephones and battery with contractors own material from DP Box to equipment/Telephone by using 25 mm PVC Pipe with clamps,bends etc. 10191 Installation of 100 pair Krone terminals on hard wood plank of size 8" x13" x1" plant and wiring. Total for Bill No.10 (Carried forward to Summary of Part-II)
Nos Nos.
51.00 127.00
10 3
510.00 381.00 33869358
125

Bill of quantities, Part-II Bill No.-11 GENERAL ELECTRICAL SERVICES WORKS
Item No. This schedule shall be read in conjunction with its Explanatory Notes and Technical Specifications for detailed description for various items included therein. Unit Rate ( Rs.) Amount (Rs.) Description of Items Unit Qty Supply Erection Total Supply Erection Total 3 4 5 6 7(5+6) 8(4x5) 9(4x6) 10(8+9)
1 2 SECTION - A : ELECTRIFICATION OF STAFF QUARTERS 33001 Electrification of staff quarter complete with point wiring, circuit wiring, sub main wiring etc. with Fire Retardant (FR) PVC insulated, multistranded, copper conductor, single core cable on surface /in recessed PVC conduits, along with provision of luminaries with lamps, call bells, ceiling & exhaust fans, distribution boards, loose wire box, geyser, energy meters in M.S. box including earthing with G.I. pipe electrode etc. as per Scale of fittings, and cable sizes, no. of wires permissible in each circuit and sub main/s etc. for each type of quarter as indicated in Explanatory Notes. ii) Type - II quarter iii) Type - III quarter iv) Type - IV quarter ELECTRIFICATION CROSSINGS OF GATE MAN LODGES AT LEVEL Each Each Each
12 8 1
20885 26215 48500
20885 26215 48500
250620 209720 48500
250620 209720 48500
33002 Electrification of gate man lodge complete with point wiring, circuit Each wiring etc. with Fire Retardant (FR), PVC insulated, multistranded, copper conductor, single core cable on surface/in recessed PVC conduits including provision of luminaries with lamps, ceiling fan, distribution board, earthing with G.I.pipe electrode etc. as per Scale of fittings, cable sizes, no. of wires permissible in each circuit and sub main/s as indicated in Explanatory Notes. ELECTRIFICATION OF SERVICE BUILDINGS, PUMP HOUSE, SUBSTATION, OFFICES ETC. 33003(i) Wiring for light/ceiling fan/exhaust fan/call bell/light plug/group points Point etc. including circuit wiring, sub-main wiring with Fire Retardant (FR), PVC insulated, multistranded, copper conductor, single core cable on surface/in recessed PVC conduits, distribution boards, sub distribution boards, earthing etc as required. Wiring shall be done as per sizes of cables ,no. of wires permissible in each circuit and sub mains etc.as indicated in Explanatory Notes. 33003(ii) Wiring for power plug point including circuit wiring, sub main wiring, Point with Fire Retardant (FR) PVC insulated, multistranded, copper conductor, single core cable on surface/in recessed PVC conduits, distribution boards, sub distribution boards, earthing with G.I.pipe electrode etc as required. Wiring shall be done as per sizes of cables ,no. of wires permissible in each circuit and sub mains etc.as indicated in Explanatory Notes. 33003(iii) Extra for provision of industrial type iron clad plug socket with 32A DP Point MCB in M.S.Box ELECTRIFICATION OF PASSANGER SHELTER AND SHEDS
12354
12354
111186
111186
752
771
771
579792
579792
80
1415
1415
113200
113200
18
386
386
6948
6948
33004(i) Electrification of passanger shelter/shed complete with wiring for light Point point or ceiling fan point in group point wiring system,point wiring for light and fan, light plug (5Amps) point wiring as required, including circuit wiring,sub main wiring etc. with Flame Retardant (FR) PVC insulated, multistranded, copper conductor single core cable on surface PVC conduits, sub distribution boards for independent control of lighting and fan circuits, earthing with G.I. pipe earth electrode etc as required. Wiring shall be done as per sizes of cables ,no. of wires permissible in each circuit and sub mains etc.as indicated in Explanatory Notes. 33004(ii) Wiring for power plug point including circuit wiring, sub main wiring, Point with Fire Retardant (FR) PVC insulated, multistranded, copper conductor, single core cable on surface/in recessed PVC conduits, distribution boards, sub distribution boards, earthing with G.I.pipe electrode etc as required.Wiring shall be done as per sizes of cables ,no. of wires permissible in each circuit and sub mains etc.as indicated in Explanatory Notes. 33004(iii) Extra for provision of industrial type iron clad plug socket with 32A DP Point MCB in M.S.Box SECTION - B: PROVISION OF LUMINARIES, FANS, WATER COOLER ETC. 33005 Supply, installation, testing and commissioning of prewired 1x28watt, T- No. 5, energy efficient, surface type luminary with epoxy powder coated CRCA sheet steel housing with reflector cover, similar to Bajaj Cat. Ref. No.BTIR128 complete with electronic ballast, T-5 tube etc. & earthing etc. as required. 33006 Supply, installation, testing and commissioning of prewired 2x28watt, T- No. 5, energy efficient street light luminary similar to Bajaj Cat. Ref. No. BTSLF228T5, complete with T-5 tubes, electronic ballast etc.on pipe bracket of erected pole or on wall bracket & connections from junction box/overhead line/light point etc. to luminary with 1.5 sq.mm FRLS PVC insulated multistranded copper conductor single core cable & earthing etc as required. 33007 Supply, installation, testing and commissioning of metal halide street light luminary with MH lamp, on pipe bracket of erected pole or on wall bracket of class"B"G.I.pipe & connections from junction box/overhead line/ light point etc. to luminary with 1.5 sq.mm FRLS PVC insulated multistranded copper conductor, single core cable & earthing etc as required. (i) 1 x 70 Watt similar to Crompton cat. ref MHSGN1107IH No. (ii) 1 x 150 Watt similar to Crompton cat. ref MHSG2115IH/FG No. 33008 Supply, installation, testing and commissioning of A.C. ceiling fan complete with wiring the down rod with 1.5sq.mm FR, PVC insulated, copper conductor, single core cable, earthing etc. as required. i) 1200 mm (without Regulator) ii) 1400 mm (without Regulator) 33009 Supply and fixing of stepped type, electronic fan regulator, 300 watts, on the existing phenolic laminated sheet cover plate of switch box, including connections,testing & commissioning as required. 33010 Supplying, installation, testing and commissioning of 11 watts, 230 volts, 2 pin, compact fluorescent lamp (CFL) complete with electronic ballast etc. as required. 33011 Supply, erection, testing and commissioning of 300mm, 900 rpm exhaust fan suitable for 1-phase, 230 volts, AC supply system complete with capacitor, louver shutters, grouting bolts with nuts, making opening/modification in the wall to suit the size of the fan, making good the damages, connections with 1.5sq.mm, FR, PVC insulated, multistranded copper conductor, single core cable, earthing etc. as required. No. No. No.
260
771
771
200460
200460
32
1415
1415
45280
45280
386
386
1544
1544
562
1008
178
1186
566496
100036
666532
216
2040
360
2400
440640
77760
518400
54 179
3699 4316
652 761
4351 5077
199746 772564
35208 136219
234954 908783
95 99 194
1042 1132
183 200 266
1225 1332 266
98990 112068
17385 19800 51604
116375 131868 51604
No.
38
111
20
131
4218
760
4978
No.
20
1681
296
1977
33620
5920
39540
33012 Supply, installation, testing and commissioning of self contained Each drinking water cooler 150 liters capacity (cooling capacity 150 Lts. per hour), conforming to IS:1475/1978 (latest version) suitable for operation on 230 volts+/-10%, 50Hz, AC supply system complete with all connected standard fittings, accessories etc. and 5KVA , wall mounted, I.C. controlled electronic auto-voltage corrector conforming to relevant IS (latest version), suitable for operation on single phase 180 to 260 volts, 50Hz incoming AC supply and output 200 to 230 volts A.C. supply, complete with time delay relay, voltmeter, instant start provision with push button switch, earthing etc as required. SECTION - C: L.T.SWITCH BOARDS AND FEEDER PILLAR 33013 Supply, installation, testing & commissioning of cubical type, wall No. mounted, dust & vermin proof, LT switch board, conforming to IS:8623 (latest version). LT switch board shall be suitable for operation on 3 phase, 4 wire, 415 volt, AC supply system, fabricated with 16 SWG M.S. sheet, powder coated and complete with inter connections, instrument connections with copper conductor cable, copper bus bars 250 amps., CT's, voltmeter, ammeter, LED type indication lights, cable glands, earthing studs etc. comprising of the following: i) Incoming MCCB 125A, 4 pole, 35kA, fixed type (Ics=100%Icu) - 1 No ii) Outgoing MCCB 63A, 25kA, fixed type (Ics=100%Icu) - 4 Nos iii) Outgoing MCB 40A, 4 pole, 10kA - 4 Nos iv) Outgoing MCB 32A, double pole, 10kA 6 Nos v) Sleeved/Epoxy coated copper bus-bar in bus bar chamber vi) Indication lights 33014 Supply, installation, testing & commissioning of cubical type, wall No. mounted, dust & vermin proof, L.T switch board conforming to IS:8623 (latest version), suitable for operation on 3 phase, 4 wire, 415 volt, AC supply system, fabricated with 16 SWG, M.S. sheet, powder coated and complete with inter connections, instrument connections with copper conductor cable, 200A copper bus bars, voltmeter, ammeter, clustered LED type indication lights, cable glands, earthing studs etc. and shall comprise of the following: (i) Incoming MCCB 63A, 4 pole, 35kA, fixed type (Ics=100%Icu) - 1 No (ii) Outgoing MCCB 40A, 4 pole, 25kA, fixed type (Ics=100%Icu) - 3 Nos (iii) Outgoing MCB double pole, 6-32A, 10kA - 20 Nos (iv) Sleeved/Epoxy coated copper bus-bar in bus bar chamber 33015(i) Supply, installation, testing & commissioning of weather proof, L.T. No. feeder pillar (degree of protection not less than IP54), fabricated with 2 mm thick CRCA sheet, conforming to IS:8623 (latest version), powder coated, suitable for operation on 3 phase, 4 wire, 415 volt, AC supply system, including construction of 450 mm high brick masonry platform, inter connections, 200 amps copper bus bars, indication lights, cable glands, earthing studs etc. and shall comprise of the following: (i) Incoming MCCB 63A, 4 pole, 35kA, fixed type (Ics=100%Icu) - 1 No (ii) Outgoing MCCB 40A, 4 pole, 25kA, fixed type (Ics=100%Icu) - 4 Nos (iii) Outgoing MCB double pole, 40A, 10 KA - 4 Nos (v) Sleeved/Epoxy coated copper bus-bar in bus bar chamber
10
43140
7613
50753
431400
76130
507530
10
46403
8189
54592
464030
81890
545920
10
42302
7465
49767
423020
74650
497670
10
47980
8467
56447
479800
84670
564470
33015(ii) Supply, installation, testing & commissioning of weather proof, L.T. No. Feeder pillar (degree of protection not less than IP 54), fabricated with 2 mm thick CRCA sheet, conforming to IS:8623 (latest version), powder coated, suitable for operation on 3 phase, 4 wire, 415 volt, AC supply system, including construction of 450 mm high brick masonry platform, inter connections, 250 amps copper bus bars, indication lights, cable glands, earthing studs etc. and shall comprise of the following: (i) Incoming MCCB 125A, 4 pole, 35kA (Ics=100%Icu) - 1 No (ii) Outgoing MCCB 63A, 4 pole, 25kA (Ics=100%Icu ) - 4 Nos (iii) Outgoing MCB 40A, 4 pole, 10kA - 4 Nos (iv) Outgoing MCB 32A, DP, 10kA - 6 Nos (v) Modular digital time switch and 3 phase contactor 63 A -- 2 set. (vi) Sleeved/Epoxy coated copper bus-bar in bus bar chamber (vii) Indication lights 33016 Supply, installation, testing & commissioning of weather proof, L.T. No. Feeder pillar (degree of protection not less than IP54), fabricated with 2 mm thick CRCA sheet, conforming to IS:8623 (latest version), powder coated, suitable for operation on 3 phase, 4 wire, 415 volt, AC supply system, including construction of 450 mm high brick masonry platform, inter connections, 400 amps copper bus bars for phases 200 amps. for neutral, cable glands, earthing studs etc and shall comprise of the following: i) Incoming MCCB 250 A FP 35KA(Ics=100%Icu) Fixed Type - 1 No ii) Outgoing MCCB 125 A FP 35KA(Ics=100%Icu) Fixed Type - 2 Nos iii) Outgoing MCCB 63 Amps FP 25KA (Ics=100%Icu) Fixed Type - 4 Nos iv) Outgoing MCB 40 Amps FP 10 KA - 4 Nos v) Outgoing MCB 32 Amps DP 10 KA - 6 Nos vi) Modular digital Time switch and 3 phase contractor 63 A -- 2 set (vii) Sleeved / Epoxy coated Copper bus-bar in Bus Bar chamber (viii) Indication lights
57264
10105
67369
286320
50525
336845
88785
15668
104453
443925
78340
522265
SECTION - D : EXTERNAL
ELECTRIFICATION
WORKS
33017 Supply and erection of 7 meters long, swaged type steel tubular pole conforming to IS-2713 /Part I to III/1980 (latest version) (designation 410 SP - 3), with canopy type single /double pipe bracket 200 mm long (diameter of pipe bracket shall match with the inlet diameter of luminaries to be provided) including digging of pit in ground, earthing etc. as required, complete with the following: i) Double door, weather proof M.S. junction box (degree of protection not less than IP54) complete with MCB 6 amps, copper bus bar for looping 4-core, 3 nos. LT cables and clamping with pole, as required. ii) Casting of foundation with cement, sand &concrete aggregrate mixture in ratio 1:3:6 and providing muffing up to 300 mm above ground level,as required iii) Erection of GI pipe class 'B' ISI marked up to junction box for passing cable. (Payment of G.I. pipe shall be made against the relavant BOQ item.) i) 7 Meter long pole with canopy type single pipe bracket (for one No. luminary) 276 7207 1272 8479 1989132 351072 2340204
ii) 7 Meter long pole with canopy type double pipe bracket (for two No. luminary) 33018 Supply and erection of 9 meters long, swaged type steel tubular pole No. conforming to IS-2713 /Part I to III/1980 (latest version) (designation 410 SP - 30), with canopy, single pipe bracket 200 mm long (diameter of pipe bracket shall match with the inlet diameter of luminaries to be provided), digging of pit in ground, earthing etc. as required complete with the following:i) Double door, weather proof junction box (degree of protection not less than IP54) complete with copper bus bar, MCB 6 amps, for looping 4 core 3 nos.LT cables and clamping with pole as required. ii) Casting of foundation with cement, sand & concrete aggregate mixture in ratio 1:3:6, providing muffing up to 300 mm above ground level as required. iii) Erection of GI pipe class 'B' ISI marked up to junction box for passing cable. (Payment of G.I. pipe shall be made against the relavant BOQ item.) 33019 Supply and erection of GI pipe - class' B' ISI marked with accessories including bends etc. for support of cable with erected pole/recessing in wall/floor/passing earth strip OR passing cable as required: ii) 40 mm dia iii) 50 mm dia iv) 65 mm dia vi) 100mm dia Meter Meter Meter Meter
30 116
7438 10819
1313 1910
8751 12729
223140 1255004
39390 221560
262530 1476564
374 444 256 320 96 4
171 222 280 524 853
30 39 50 92 151 7177
201 261 330 616 1004 7177
63954 98568 71680 167680 81888
11220 17316 12800 29440 14496 28708
75174 115884 84480 197120 96384 28708
vii) 150mm dia Meter ELECTRIFICATION OF FOOT OVER BRIDGE 33021 Electrification of foot over bridge complete with 3.5 meter long, 50 mm No dia, G.I. pipe pole with GI pipe bracket, luminary with lamp, M.S. junction box, connection from junction box to luminary with 1.5 sq.mm, Flame Retardant (FR), PVC insulated, single core, copper conductor cable and earthing with G.I. pipe earth electrode etc. and as per Scale of fittings indicated in Explanatory Notes NB- Due to covered FOB the item is included in PF Selter.
SECTION E: ARRANGEMENT
POWER
SUPPLY
DISTRIBUTION
33022 Supply, installation, testing and commissioning of 11kV/415 Volt, Delta/Star connected, copper wound, power distribution transformer (outdoor type) conforming to IS:2026 (Latest Version ), complete with all accessories as required. (i) 100 kVA No. (iv) Extra for providing fencing and iron gate for above item as indicated in Kg explanatory notes (v) Extra for construction of foundation (M20) for transformer installation as Cu.M required 33023 Supply, erection, testing and commissioning of 3 pole, 11kV, 400amps, No. gang operated switch complete with drop out fuses etc. as required. 4 1200 60 4 143316 44 2773 16937 29459 11 881 3482 172775 55 3654 20419 573264 52800 166380 67748 117836 13200 52860 13928 691100 66000 219240 81676
33025 Supply, installation , testing & commissioning of cubical type, floor No. mounted, dust & vermin proof, multi-tier construction, 17 panel LT switch board (each panel shall be in segregated compartment), fabricated with 2mm thick CRCA sheet with base MS channel 100x50x7.5mm (nominal size), duly powder coated. The LT switch board shall conform to IS:8623 (latest version) and shall be suitable for operation on 3 phase, 4 wire, 415 volt, AC supply system. The switch board shall be complete with inter connections, instrument connections with copper conductor cable, copper bus bars, front operated switchgears, selector switches, ammeter, voltmeter etc. on each incoming and ammeter on each outgoing with LED type indication lights, cable glands, earthing studs etc. and shall comprise of following: i) Incoming ACB 800A, 4 pole, 50kA (manual draw out type) with CTR 400/5A - 2 Nos ii) ACB bus coupler 800A, 4 pole, 50kA (fixed type) - 1 No iii) On load change over switch 400A, 4 pole, utilisation cat. AC 23 - 1 No. iv) Out going switch fuse unit/fuse switch unit cat AC23 (TPN) with HRC fuses (250 Amp) - 4 Nos v) Out going switch fuse unit/fuse switch unit cat AC 23 (TPN) with HRC fuses 125 Amp - 4 Nos. vi) Out going switch fuse unit/fuse switch unit cat AC 23 (TPN) with HRC fuses 63 Amp - 5 Nos. vii) Sleeved/epoxy coated copper bus-bar - 800A for phases and 400A for neutral. 33028 Supply of single core 400 sq.mm, unarmored LT XLPE insulated Meter aluminium conductor cable 1.1kV grade, conforming to IS7098 Pt.I (latest version), laying in trenches of sub-station, filling of trench with dry ordinary sand and holding of cable on transformer and panel side with frame manufactured with MS angle 50x50x6mm & clamps of MS flat 50x6mm, including end termination with LT panel & transformer with aluminium crimping socket, testing and commissioning as required. 33029 Supply, erection / fixing of fire extinguishing equipments (ISI marked), Set Rubber mat (ISI marked), GI fire buckets filled with dry sand held on free standing steel stand, First aid box with medicines (ISI marked) and associated materials, Shock treatment chart on aluminium frame and 6mm thick glass on front, schematic diagram of HT & LT installation & transformer data on white hylem sheet with aluminium frame & fixing/providing in the sub-station area as per details in explanatory notes. 33030 Supply of DG set with acoustic enclosure, complete with diesel engine, copper wound alternator, battery set, anti-vibration pads, fuel tank and all other accessories/equipments/protective devices etc and AMF control panel conforming to relevant IS, fabricated with CRCA, 16 SWG sheet, powder coated and comprising of incoming 4 pole, MCCB 50kA, copper bus-bars, 4 pole, heavy duty contactors, multifunction panel meter for display of current and voltage on phases and lines, power factor, frequency, kWH, MD etc, LED indications lights including connections with single core 1.1 kV grade LT XLPE insulated aluminium conductor cable conforming to IS:7098 Pt-I (latest version), between LT panel, AMF panel and alternator and construction of plinth as per recommendation of manufacturer, installation, testing and commissioning.
635611
70623
706234
1271222
141246
1412468
270
513
91
604
138510
24570
163080
37750
6662
44412
226500
39972
266472
(i) 82.5 kVA DG set with 160 amp, 4-pole, MCCB 50kA (Ics=100%Icu), Set 250 amps copper bus-bars, 4 pole contactors 250amp.
717224
79691
796915
1434448
159382
1593830
SECTION - F: EARTHING ARRANGEMENT 33032 Earthing with 3 meter long, 50 mm dia, G.I. pipe class 'B' earth Job electrode, adding of charcoal or coke and salt to achieve earth resistance less than 5.0 ohms, providing masonry enclosure and MS cover plate with locking arrangement etc. including connections with 4mm G.I.wire from earth electrode to switch board/electrical equipment as required. 33033 Earthing with 600mmx600mmx6mm thick G.I. earth plate, adding of Job charcoal or coke and salt to achieve earth resistance less than 1.0 ohm, providing masonry enclosure and M.S.cover plate with locking arrangement, watering pipe etc. as required. 33034 Earthing with 600mmx600mmx3mm thick copper earth plate, adding of Job charcoal or coke and salt to achieve earth resistance less than 1.0 ohm, providing masonry enclosure and M.S.cover plate with locking arrangement, watering pipe etc. as required. EARTH CONNECTIONS 33035(i) Supply and laying 25 mm x 6 mm G. I. strip at not less than 0.50 meter Meter below ground or in recess as required. (ii) Supply and laying 40 mm x 10 mm G. I. strip at not less than 0.50 Meter meter below ground or in recess as required. (iii) Supplying and fixing 40 mm x 5 mm copper strip on surface or in Meter recess or in 50 mm dia G.I. pipe as required. SECTION - G : CABLING 33036 Supply, laying under ground/road/railway track/recessing in wall/floor, in laid RCC/G.I. pipe etc. 1.1 KV grade LT XLPE insulated armoured, aluminum conductor cable conforming to IS:7098/Pt I (latest version) including digging of cable trench, sand cushioning, protective covering with second class bricks, refilling of trench with excavated earth, making good the damages, end terminations with aluminium crimping sockets/lugs, provision of cable route markers, testing and commissioning as required: i) 2 Core 16 Sq.mm iv) 4 Core 16 Sq.mm v) 3.5 Core 35 Sq.mm vi) 3.5 Core 70Sq.mm vii) 3.5 Core 120Sq.mm viii) 3.5 Core 185Sq.mm x) Extra for provision of cable route marker SECTION - H : ELECTRIFICATION OF YARDS Meter Meter Meter Meter Meter Meter No.
160
1584
280
1864
253440
44800
298240
12
1759
310
2069
21108
3720
24828
3108
548
3656
12432
2192
14624
248 168 192
36 58 461
7 10 81
43 68 542
8928 9744 88512
1736 1680 15552
10664 11424 104064
1391 15680 3498 6749 1780 3020 360
154 198 280 446 704 986 186
39 49 50 79 78 110 10
193 247 330 525 782 1096 196
214214 3104640 979440 3010054 1253120 2977720 66960
54249 768320 174900 533171 138840 332200 3600
268463 3872960 1154340 3543225 1391960 3309920 70560
33037 Supply, erection, testing & commissioning of hot dipped galvanised (inside & out side), 16m high mast system (in two sections), complete with accessories, foundation bolts with nuts, washers, anchor plates & templates etc. manufactured from special steel, head frame, 2-point suspension system with steel wire rope 6mm dia (7/19 construction), double drum winch, galvanised lantern carriage arrangement suitable for 9 luminaries symmetrically arranged & control gear boxes and lighting finial etc.The mast shall have integral type power tool at the base compartment for its raising and lowering operation, twin dome aviation obstruction lights with 100 watt lamp, control panel etc. High mast shall be supplied complete with 2x400 watts MH luminarie (degree of protection IP-65) with control gear boxes, MH lamps, multi core flexible copper conductor cable, control panel suitable to control circuits for automatic switch ON and OFF for 50% & 100% lighting, earthing with GI pipe earth electrode etc. as required. High mast shall be provided with fencing panel of size 2Mx2Mx1.5M in square shape for protection of erected high mast tower. The cost shall also include construction of foundation as per recommendation of manufacturer.
i) 16 Meter high mast system with 6 nos. 2x400 watts MH luminaries and Job MH lamps ii) 16 Meter high mast system with 9 nos. 2x400 watts MH luminaries and Job MH lamps SECTION - I: MODIFICATION OF 11 KV / 33 KV OVERHEAD POWER LINE CROSSINGS 33038 Supply of 33kV XLPE (E) insulated, armoured, 3-core aluminium Meter conductor cable of size 300 sq.mm, conforming to IS:7098/Pt.II/85 and laying in already laid pipe under railway track/road and clamping with already erected pole after passing vertically through existing GI Pipe AND laying under ground including digging of cable trench, providing sand cushioning, protective covering with bricks, providing cable route markers, testing and commissioning as required. Work also includes coordination with Supply Utility Company for arranging power shut down and returning and transporting of released materials.
6 2
509539 543330
56616 60369
566155 603699
3057234 1086660
339696 120738
3396930 1207398
800
3056
161
3217
2444800
128800
2573600
33039 Supply of 11 kV XLPE (E) insulated, armoured, 3-core aluminium Meter conductor cable of size 185 sq.mm, conforming to IS:7098/ Pt.II/85 and laying in already laid pipe under railway track/road and clamping with already erected pole after passing vertically through existing GI pipe AND laying under ground including digging of cable trench, sand cushioning, protective covering with bricks, providing cable route markers, testing and commissioning as required. Work also includes coordination with Supply Utility Company for arranging power shut down and returning and transporting of released materials.
1000
1375
153
1528
1375000
153000
1528000
33040 Supply of outdoor type, heat shrinkable, end termination kit, suitable for No. 3 core 300 sqmm 33kV XLPE(E) insulated, armoured aluminium conductor cable and making termination, connections with overhead conductor, testing & commissioning etc. 33041 Supply of outdoor type, heat shrinkable, end termination kit, suitable for No. 3 core 185 mm 11 KV XLPE(E) insulated, armoured aluminium conductor cable and making termination, connections with overhead conductor testing & commissioning as required. 33042 Supply and erection of pre-stressed, cement concrete (PSCC) double No. pole ( H Pole ) structure 11 meters long suitable for 330 KG working load with top section 200 mm X 105 mm and bottom section 410 mm X 140 mm complete with 4 nos. channel cross arms & 2 nos. cross bracing angles, clamps, bolts, nuts , anti climbing devices, danger plates on the erected pole, galvanized stay set , casting of foundation for poles & stays etc. as required. 33043 Supply and erection of 11 KV Porcelain Disc insulator(120 KN) Set complete with galvanised iron hardware etc. including terminating with 11KV / 33 KV overhead conductor and dismentelling works as required. 33044(i) Supply and laying of 200 mm dia RCC hume pipe, ISI marked, under Meter the Railway track/road etc. by digging of trench and back filling with excavated earth after laying of pipe and making good the damages as required. 33044(ii) Supply and laying of 200 mm dia RCC hume pipe, ISI marked, under Meter the Railway track with trench less method and back filling of excavated pits and making good the damages as required. SECTION - J: PROVISION OF PUMPS 33045(i) Supply, installation, testing & commissioning of submersible pump set Job to supply water @525 LPM at 50m height along with control panel etc. to operate on 3 phase, 415V, 50Hz, AC supply complete as per details in explanatory notes
16
19457
2162
21619
311312
34592
345904
20
6208
690
6898
124160
13800
137960
18
37483
4164
41647
674694
74952
749646
102
675
75
750
68850
7650
76500
1400
250
28
278
350000
39200
389200
200
1241
138
1379
248200
27600
275800
43982
4887
48869
87964
9774
97738
33045(ii) Supply, installation, testing & commissioning of submersible pump set Job to supply water 350 LPM at 40m height, along with control panel etc. to operate on 3-phase 415V, 50Hz, AC supply complete as per details in explanatory notes SECTION -K: MISC. WORKS 33046 Co-ordination/liasoning and chasing with State Utility Company for Each availing new electrical connection/augmentation of sanctioned load at Location stations, level crossings etc. including applying for load, collection of estimates for loads, modification of power line crossings, arranging payment from RVNL, depositing payment to State Utility Company, arranging release of load & other related works. Payment to be made to SEB for new connections, load augmentation, modification of power line crossings etc. shall be made by RVNL.
40278
4476
44754
120834
13428
134262
30
5273
5273
158190
158190
33047 Design and preparation of working & completion drawings of all HT/LT Job electrical installations of the project section where work is carried out such as platform lighting, internal electrification of staff quarters, level crossings, station building, offices, power line crossings, power supply distribution arrangements of stations /sub stations, electrification of substation buildings etc.& approval from the competent authority.
108680
108680
108680
108680
33048 Conducting check survey of the complete project section to compile Job details of all the existing LT, HT and EHT Power Line Electrical overhead and underground power/telegraphic/other lines running along or accross the track and recording measurements of horizontal distances of structures from the existing & proposed tracks, vertical clearances of conductors & guard wire from rail level, angle of crossings w.r.t. track, height and type of towers/poles and preparation of lists as below: i) List of Overhead/Underground Crossings infringing the ''Regulations for Electrical Crossing of Railway Track,1987" with latest amendments and requiring modification. Proposed modification may also be indicated. ii) List of Overhead/Underground Parallel Alignments infringing the ''Regulations for Electrical Crossing of Railway Track,1987" with latest amendments and requiring modification. Proposed modification may also be indicated. iii) List of Overhead/Underground Crossings/Parallel Alignments in conformity with the ''Regulations for Electrical Crossing of Railway Track,1987" with latest amendments not requiring modification. SECTION - L : (GLOW SIGN BOARDS )
85800
85800
85800
85800
33049 Supply, installation, testing & commissioning of out door type, single Sq.Feet side, /Double side Glow sign boards/Pictorial signage boards with suspension /side mounting/wall mounting type arrangements as required, complete including internal wiring with 2x1.5sq mm FR PVC insulated, multistrand, copper conductor single core cable on surface PVC conduit, earthing with 1.5 sq mm FR PVC insulated multi strand copper conductor single core cable conforming to IS 694(latest version) etc, acrylic sheet of thickness not less than 4mm on front side, G.I /Aluminium Sheet of 24 SWG on all 5 / 4 sides with louvers etc.as required. Depth of board shall not be less than 200mm. Erection arrangement shall be as approved by Railways. Matter to be written / displayed on signboards shall be got approved before manufacturing of board .Provision of luminarie shall be based on sample calculation indicated in explanatory note. Glow sign board shall have degree of protection not less than IP 54 . (Payment for Double sided glow sign board shall be made @ 150% of the rate of single sided glow sign boards) SECTION -N : DISMANTLING WORKS 33053 Dismantling of wiring installations of buildings, sheds, quarters etc. Each complete with luminaries, fans, distribution boards, L.T. Panels and Station associated cables including accountal,stocking, transportation and handing over of released materials to Electrical department as directed by the Engineer and making temporary arrangements if required. 33054(i) Dismantling of erected pole/overhead conductor, GI wire, cross arm No. brackets, insulators, stay, luminary etc including accountal , stocking,transporting, handing over the released material to railways authorized official as instructed by the Engineer and making temporary arrangements if required.
528
196
34
230
103488
17952
121440
5000
5000
30000
30000
36
500
500
18000
18000
33054(ii) Dismantling of Sub-Station equipments such as transformers, DG Set, Job HT & LT Panels, cables etc. at site including transporting, stocking and handing over to Electrical department as instructed by the Engineer and making temporary arrangements if required. SECTION - O : (N.I Works ) 33055(i) Provision of temporary lighting arrangement with 1x40 watt F.L. tube Each light fittings /flood light/halogen fittings and pedestral fans in temporary station tents, buildings, goomties, on tracks, in yard area including wiring, cabling, earthing etc.as directed by the Engineer and as per site requirement for non - interlocking period, including providing stand by D.G set of suitable capacity and deployment of staff for operation of DG set as per site requirement. Note: Normal power supply may be used, up to sanctioned load, if surplus available at site. 33055(ii) Extra for operation and maintenance of temporary wiring installations, Per day replacement of consumables, supply of diesel oil, lub oil etc for operation of DG set etc. SECTION - P : (additional requirement HT/LT X-ing modification) NS-1 Supply and erection of 9 KV 5 KA distribution class lightning arrestor No.
including connection to earth electrode through 8 SWG GI wire including transportation.
10000
10000
10000
10000
15000
15000
90000
90000
2976
2976
17856
17856
30
652
652
19560
19560
NS-2 Supply and erection of 30 KV 10 KA station class lightning arrestor No.

including connection to earth electrode through 8 SWG GI wire including transportation.
24
4823
4823
115752
115752
GRAND TOTAL (Section A to P) Total for Bill No. 11 ( Carried forward to Summary of Part-II)
NOTE:-The above prices are inclusive of all costs(excluding excise duty),levies and taxesetc. 1. Payments: a) 80% of the accepted supply shall be paid on receipt of material at site, after due inspection against indemnity bond . If for any item of work, price of material & erection is not separately available, 80% of the item price will be considered as supply. b) Further payment of supply & erection cost to cover 90% of theaccepted item price (supply and erection) shall be made after erection. c) Balance 10% payment shall be released after satisfactory commissioning and handing over of complete installation.
36475137
5674249
42149386 42149386
Item. No
EXPLANATORY NOTES Explanatory Notes GENERAL INSTRUCTIONS: 1) Current RDSO specifications are mentioned here. However, while procuring only the LATEST RDSO SPECIFICATION will prevail and material to be inspected as per latest specifications. 2) Drawing number mentioned here are current and may be updated. Latest drawings is required to be followed while execution of work. 3) The quantities of subitems against each item are to be calculated/assessed and approval of Engineer to be taken before consolidated procurement of such items and for arranging inspection by RDSO/RITES, as the case may be as indicated under Inspection Agency
INSPECTION AGENCY
36001 a
ELECTRONIC INTERLOCKING WORK - SUPPLY This includes supply of : Supply of Electronic Interlocking (EI) System - complete as per technical specification of Material as per IRS specn to Contract suitable for use in 25KV RE area and generally conforming to RDSO be inspected by RDSO.(Like Specifications No. RDSO/SPN/192/2005 or latest with amendments mainly consisting of: EI, Relays, Tagblock, Wires, data logger etc.) remaining other material by Engineer. a) Microprocessor Equipment b) Interface equipment/Relays c) Optical/Copper interface d) Point Operation Relays e) LED Lamp Proving Realys f) Signal & Point Fuses, Tagblocks with cover g) Interconnecting indoor cables h) Wiring Materials
i) Maintence Terminal for as per Clause 5.1.5 & 7.2 of RDSO specfn. for online logging j) Interface for data transfer to central monitoring unit through data logger k) Inbuilt power supply equipment and busbar l) Relay racks, fixtures, mounting arrangements, Ladder, runway and accessories m) Protective devices like fuses, lightening protectors etc. as per requirement and recommended by manufacturer and RDSO n) Interconnecting copper/optical cable along with interface to make connections between EI and CCIP with Panel Processor/VDU as per RDSO Cl. 5.1.4 o) Termination of functions up to cable termination rack. p) Remaining other relays, wiring material etc., if any. q) Track repeater relay QSPA1 and CCIP shall be paid separately under separate supply item. r) IMPORTANT NOTE: Description of various modules, sub assembly and other accessories required for the above work with unit rate to be furnished by EI manufacturer/contractor. s) Compliance of RDSO Specification: Information to be furnished by purchaser 1. Clause 5.1.4: Station Master is to be provided with CCIP only. However SM room and equipment room may be situated in two different building and therefore may be required to be provided with augmented surge protection/Optical interface by EI Manufacturer. 2. System output required to drive field gears - Relay interface 3. The manufacturer shall advise complete list of items in a set required for EI system before placing demand for RDSO call letter.Quantity and total cost should be submitted by the EI Manufacturer/Contractor by attaching as annexure.
Supply of essential spares to the extent of 5% subject to minimum of one, for the cards/modules/PCB, connectors/couplers, fuses, all relays, crimp contact, lightening arrestors, isolators, convertors etc used in the complete EI system. In addition spare to the extent of 5% subject to minimum of one for all type of interface relays with bases used in EI. Item-wise details of spares to be supplied with unit rates should be listed out by the tenderers in separate annexure.
Supply of Tools and Instruments - Tool Kits and Measuring Instruments for technicians/Junior Engineers for testing & maintenance and repair at site and trouble shooting of hardware & software for EI systems as per manufacturer's recommendations. List of instruments & tool kits to be provided by the supplier along with number and unit prices. Payment under this item will be made for Electronic Interlocking supplied against item no 36001 by calculating the functions controlled by EI as per Function Table enclosed with the Bid document. Functions up to 125 is covered under item no 36001. For each additional function beyond 125, payment will be made against this item. Typical value of each function is indicated in the enclosed table and based on the actual number of functions controlled by the EI, the total value of functions can be calculated. Supply of portable work station to run along with EI configuration tools, data inputs, simulation and functional testing, diagnostics and trouble shooting and commissioning of EI system. Note: Work station should be capable of reconfiguring the system in case of any alterations in the Yard or Interlocking in future. Hardware Configuration to be approved by RVNL before supply. AXLE COUNTER WORK - SUPPLY Supply of Single section Digital Axle Counter System for monitoring track section as per RDSO RDSOSpcn.No.RDSO/SPN/177/2003 with latest amendment. This will cover all equipments required to work the single track section clearance and consist of High Frq Tx,Rx coil, track side digital axle counter unit, vital relay with relay box duly wired, Clamp, reset box, surge protection device etc. The set stands for the equipment required at either end of track section. The manufacturer shall advise complete list of items in a set required for this system before placing demand for RDSO call letter.
36002
36003
36101
36102
Supply of Multi section Digital Axle counter for FOUR TRACK SECTIONS complete with RDSO FIVE DETECTION HEADS, one central evaluator, with reset arrangement and vital relays Q style and necessary fitting arrangements required for fixing of detection heads as per RDSO/SPN/176/2005 (VER. 2) with latest amendments . The equipment must also include (i) MICRO CONTROLLER / EVENT LOGGER CARD WITH REQUIRED SOFTWARE. (ii) SURGE PROTECTION DEVICE. (iii) Installation material - Reduction plates, Deflectors, Mounting frames for evaluation computers, Counting head housing, LIghting protection module with accessorries, Earthing bolt for counting head.The manufacturer shall advise complete list of items in a set required for this system before placing demand for RDSO call letter. Supply of Multi section Digital Axle counter for SEVEN TRACK SECTIONS complete with RDSO EIGHT DETECTION HEADS, one central evaluator, with reset arrangement and vital relays Q style and necessary fitting arrangements required for fixing of detection heads as per RDSO/SPN/176/2005 (VER. 2) with latest amendments . The equipment must also include (i) MICRO CONTROLLER / EVENT LOGGER CARD WITH REQUIRED SOFTWARE. (ii) SURGE PROTECTION DEVICE. (iii) Installation material - Reduction plates, Deflectors, Mounting frames for evaluation computers, Counting head housing, LIghting protection module with accessorries, Earthing bolt for counting head. The manufacturer shall advise complete list of items in a set required for this system before placing demand for RDSO call letter. Supply of Multi section Digital Axle counter for FIFTEEN TRACK SECTIONS complete RDSO with EIGHTEEN DETECTION HEADS , one central evaluator, with reset arrangement and vital relays Q style and necessary fitting arrangements required for fixing of detection heads as per RDSO/SPN/176/2005 (VER. 2) with latest amendments . The equipment must also include (i) MICRO CONTROLLER / EVENT LOGGER CARD WITH REQUIRED SOFTWARE. (ii) SURGE PROTECTION DEVICE. (iii) Installation material - Reduction plates, Deflectors, Mounting frames for evaluation computers, Counting head housing, LIghting protection module with accessorries, Earthing bolt for counting head. The manufacturer shall advise complete list of items in a set required for this system before placing demand for RDSO call letter.
36103
36104
36105
Supply of AXLE COUNTER TOOL KIT: Required tools for tool kit must be recommended RDSO by the manufacturer. Purpose of toolkit is to test, diagnose and calibrate the axle counter. However Tool kit for axle counter must consist minimum of (1)True RMS digital multimeter of Fluke make with probe set - 1 no. (2)Extended wired socket to interface with diagnostic plug - 1no. (3) Adjustable torque wrench with inserts (4) Double ended spanner (5) Dummy wheel - 1 nos (6) Screw driver set (7) Carrying case.
36106
Supply of Web detector (each set consists of 2 nos. of TX and 2 nos. of RX coils) for ENGINEER Analog/Digital axle counters with complete components per detection points. NOTE: This item is required to shift the existing axle counters installed at stations from its present location to new location, thus existing make, type etc is to be checked before placing orders. OUTDOOR SIGNALLING CABLE WORK - SUPPLY Supply of outdoor signaling cable : Cable Railway signaling unscreened underground with RDSO plain annealed copper conductor, armoured PVC insulated to conform to IRS-S-63/2007 with amendment 2 or latest. For drum length conditions of IRS will be applicable. Drum no. and name of consignee to be painted on the cable drum. Supply of Cable Railway PVC insulated, armoured unscreened, Stranded Aluminium RDSO conductor power as per IRS-S:63/2007 (Amndt-2) & IS 1554 (Part-1) of type 2 Core x 25 Sq mm. DESIGN & DRAWING WORK - SUPPLY Supply of design set for circuit consist of desktop pc, intel pentium dual core with min 2GB ENGINEER RAM, 140 GB harddisk, DVD drive, keyboard, optical mouse, 17" LCD monitor of HP/DELL/Compaq/Lenovo make with printer A3 size of HP make. (Spec to be updated while inviting tender) RELAYS - METAL TO METAL - SUPPLY Supply of Point Chain Group No. RSSK 3515/03 of siemens type with relay base plate as RDSO per RDSO spn.IRS-S-46
37201 to 37208
37209
38301
38351
38352
Supply of Point Group RRI, Siemens type (No RSSK 3515/19) as per RDSO spn.IRS-S- RDSO 46 Supply of Point Group PI, Siemens type (No RSSK 31/0001) as per RDSO spn.IRS-S-46 RDSO
38353
38354
Supply of Route Group, Siemens type ( No RSSK 31/0002) as per RDSO spn.IRS-S-46
RDSO
38355
Supply of Signal Group, 3 Aspect Siemens type (No RSSK 3525/46) as per RDSO RDSO spn.IRS-S-46 Supply of Signal Group, 2 Aspect Siemens type (No RSSK 3525/2) as per RDSO spn.IRS- RDSO S-46 Supply of Shunt Signal Group Siemens type ( No RSSK 3526/67) as per RDSO spn.IRS-S-RDSO 46 Supply of DC Neutral line Relays (Non AC Immunised) Mini Groups of 2 Nos. K-50 Relays RDSO Siemens type (No. RSSK 30/0011) with contact configuration 4F/4B, 5F/3B, 6F/2B as per RDSO spn.IRS-S-46 Supply of Plug in type Interlocked Relays consisting of two nos. of DC neutral relays RDSO Siemens type (No. RSSK 30/0012) IRS-S-46 contact configuration 4F/4B Supply of Plug In type Relay Metal to Metal type neutral relay mini groups (AC RDSO Immunised) Siemens type (No. RSSK 30/0078) or equivalent (Ref. IRS:S46)IRS-S-46 contact configuration 4F/4B Supply of Time Element Relay (Clock work type) AG timer Siemens type (No RSSK RDSO 30/0052)
38356
38357
38358
38359
38360
38361
38362
Supply of ON/OFF/ROUTE aspect ECR for Main Signal Siemens RSSK 30/0013 IRS:S46 RDSO with bases suitable for LED signals Supply of Key Lock Relay with different ward combinations (one extra set of ward plate for ENGINEER Point Machine to be supplied with each relay). Siemens type. Supply of Plug in type point group contactor relay siemens type operated on 24 V as per RDSO RDSO Specn.No.IRS-S-46/77 and firms Specification. RELAYS - METAL TO CARBON - SUPPLY Supply of Relay DC miniature plug in neutral line tractive armature 24 V DC, contacts front RDSO & back contacts metal to carbon complete with plug board retaining clip & connectors to BRS -930 A. IRS-S-34,IRS-S-23. Interlocking code ABCDE. - QN1 (Contact configuration 12F/4B or 8F/8B) Supply of Relay AC immune miniature plug in neutral line tractive armature 24 V DC, RDSO Contacts front & back contacts metal to carbon complete with plug board retaining clip & connectors. BRS -931 A as per RDSO Specn.No. IRS-S-34, IRS-S-23 IRS-S-60/78.-QNA1 (Contact configuration 12F/4B or 8F/8B) Supply of Relay miniature plug in TWIN neutral line tractive armature 24 V DC, Contacts RDSO front & back contacts metal to carbon complete with plug board retaining clip & connectors. BRS -960 as per RDSO Specn.No. IRS-S-34, IRS-S-23 IRS-S-60/78.QNN1 (Contact configuration 6F/2B or 4F/4B) Supply of Relay miniature AC IMMUNISE plug in TWIN neutral line tractive armature 24 V RDSO DC, Contacts front & back contacts metal to carbon complete with plug board retaining clip & connectors. BRS -960 as per RDSO Specn.No. IRS-S-34, IRS-S-23 IRS-S60/78.QNNA1 (Contact configuration 6F/2B or 4F/4B) Supply of Relay plug in type QS3, Sensitive Neutral line relay 12V, 1000 Ohms, 4F/4B, RDSO complete with plug board retaining clips and connectors as per specification no.BRS 930 & IRS S34 &23. Interlocking code for this unit shall be CDEKX
38363
38364
38401
38402
38403
38404
38405
38406
Supply of Relay DC plug in neutral line 24 VDC, 1000 ohm, 6F/ 6B complete with plug RDSO board, retaining clips & connectors etc. to BRS-930A, IRS-S-34/68, IRS-S-23/86 & IRS-S60 similar to QN1K interlocking code BDEKX Supply of Relay AC Immunise DC plug in neutral line 24 VDC, 1000 ohm, 6F/ 6B complete RDSO with plug board, retaining clips & connectors etc. to BRS-931A, IRS-S-34/68, IRS-S-23/86 & IRS-S-60 similar to QNA1K interlocking code CDEKY Supply of RELAY PLUG-IN TYPE, Style-QECX, AC LAMP PROVING RELAY (Metal-to- RDSO Carbon Contact), slow release, 4F-4B contact, suitable for working in series with 110V AC LED SIGNAL LAMP for ON/OFF/Route/Shunt/Calling ON aspect complete with plug board, retaining clip and connectors. Confirming to BRS: 941A, IRS: S34&S23 & STS/E/RELAYS/AC LIT LED SIGNAL/09-2002. Supply of Timer Relay Fail safe type of electronic time delay device - 24 Volt DC for Rly. RDSO Signaling as per Spec. No. IRS:S-61/2000 with latest amd. with a time setting of 120 seconds Supply of Electronic Flasher Relay, 60 flashes per minute as per RDSO spn no: RDSO RDSP/SPN/173/2002 PANEL, RACK & FUSES WORK - SUPPLY Supply of spare domino unit with cover plate as per approved panel diagram fully equipped ENGINEER with LED bulbs, buttons and wiring etc to facilitate modification in operating panel, indication panel, control cum indication panel. Preference should be given for supply of dominos from the original manufacturer of panel in which modification is to be done.
38407
38408
38409
38410
38451
38452
This includes:
Supply of Indication cum operating panel with tag block completely wired with full ENGINEER compliments like operating, emergency push buttons, counters with sealing arrangement, SM's key depicting on LED indication of various functions in the yard layout such as signals, points, track circuit etc. and housed in a sheet metal cabinet. Each of the working domino should have all 15 terminals components. The panel should have polycarbonate sheet cover on the top. All fused LEDs shall be replaced by contractor during testing period. SPARE:10% of working domino with cover plate completely wired and 10% of LEDs of each colour,10% (minimum three) of buttons, 10% of counter, 2 magnets, 1 buzzer & 4 bulb extractors shall be handed over as spare after commissioning of the installation by the contractor. Tag block (if used) shall conform to RDSO specn. IRS-S77/91.Manufaturer's name plate with address to be provided. Dominos of size 54 x 34 mm.Payment will be made based on actual size of panel on per domino basis.
Supply of PVC Indoor Cable 1x60x0.6mm dia., PVC Insulated Multi Core unsheathed with RDSO plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 Colour coding of insulation of inner core shall be in six colours viz. Blue, Red, Gray, Green, Brown and Black - in Quantity as per requirement to make connection between Relay room and Panel
Supply of PVC Indoor Cable 1x 40x0.6mm dia. PVC Insulated Multi Core unsheathed with RDSO plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 Colour coding of insulation of inner core shall be in four colours viz. Yellow, White, Pink and Violet - in Quantity as per requirement to make connection between Relay room and Panel This includes supply of: Main Cable Termination rack complete with scaffolding, fixtures and accessories including ENGINEER mounting arrangement (10 mm thick Hylam or any other suitable arragement) for fixing eight way terminal blocks/ARA/ Modular terminals, along with supply of ladder, string rods, frame,base assembly, insulators, J bolt, nut/bolts & fasteners etc. & as per extent practice on Railway
38453 a
Supply of PVC indoor cable 1 x 24 x 1 mm dia. PVC Insulated Multi Core unsheathed with RDSO plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 Colour coding of insulation of inner core shall be in six colours viz. Blue, Red, Gray, Green, Brown and Black - in Quantity as per requirement for patching between Old and New CT Tack This includes: a) Supply of Relay Rack Assembly (SIEMENS STYLE) complete with scaffolding, fixtures Engineer and accessories for fixing relays, plug board, sting rods, fuses, mountings brackets, IDF, run way for cable/wires, frame,base assembly, insulators, J bolt, nut/bolts & fasteners etc. as per extent practice on Railway. Typical part list as per attached Annexure.
38454 a
Supply of 200 Way Tag Block with cover as per IRS S77-91 - in quanitity 10 nos per Relay RDSO rack Supply of Major Relay Group Base Plates, complete with fedlisters (20 No per base plate), Engineer guide rails and other accessories suitable for major group of Siemens type - in quanitity 01 no per Relay rack Supply of Relay base plate complete with amphanols, code pins, fixing screws etc.suitable Engineer for Metal to Metal K-50 mini groups of Siemens type - in quanitity 40 no per Relay rack
Supply of Indoor Jumper Wire ATC 1 x 0.6 mm dia. PVC Insulated Single Core multistrand RDSO unsheathed with plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 in various colours. The colour coding to be proposed by the contractor after observing the practices of Railways - in quantity as per requirement of wiring of relays/relay groups & all associated equipments and subsequent alteration to approved wiring diagrams
Supply of Indoor Jumper Wire ATC 1 x 1 mm dia. PVC Insulated Single Core multistrand RDSO unsheathed with plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 in various colours in coil length of 500 mtr. The colour coding to be proposed by the contractor after observing the practices of Railways - in quantity as per requirement of wiring of relays/relay groups & all associated equipments and subsequent alteration to approved wiring diagrams. Supply of Indicative type of Fuse holder of 0.6 A, 1.6 A and 6A along with fuses of System, Engineer Rapid or Malnad Make in Metal to Metal Installations - in quantity as per requirement for the rack. This includes replacement of fuses blown off during testing and commissioning.
Supply of PVC Indoor Cable for packeting wiring 1x60x0.6mm dia., PVC Insulated Multi RDSO Core unsheathed with plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 Colour coding of insulation of inner core shall be in six colours viz. Blue, Red, Gray, Green, Brown and Black- in quantity as per requirement Supply of PVC Indoor Cable for packeting wiring 1x 40x0.6mm dia. PVC Insulated Multi RDSO Core unsheathed with plain annealed copper conductor as per IRS:S-76/89 Amndt - 3 Colour coding of insulation of inner core shall be in four colours viz. Yellow, White, Pink and Violet - in quantity as per requirement Supply of Flexible Wire Copper multistrand, 16 Sqmm, PVC insulated insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 1.21 ohms per Km at 20 degree Centigrade; over all core diameter 8.45mm0.25; conductor diameter: 0.400mm0.005; Number of conductors:126 and test parameter as per specification no: IRS:S 76/89 Amendt-3 for wiring from IPS to relay racks and power wiring in relay room in Red, Black, Green and Gray colours as per practice in railways - in quantity as per requirement.
38455 a
This includes Supply of Relay Rack Assembly (Q STYLE) complete with all scaffolding, fixtures and ENGINEER accessories for fixing relays, plug board, sting rods, fuses, mountings brackets, run way for cable/wires,frame base assembly, insulators, J bolt, nut/bolts & fasteners etc. as per extent practice on Railway.
Supply of ladders for interconnecting relay racks as per extent practice on Railway - in ENGINEER quantity as per requirement. Supply of Cable indoor copper conductor plain annealed high conductivity 650V grade RDSO PVC insulated unarmoured IRS-S-76/89 Amndt - 3. - 16 x 0.2 sq.mm in various colours. The colour coding to be proposed by the contractor after observing the practices of Railways - in quantity as per requirement of wiring of all relays & all other associated equipments and subsequent alteration to approved wiring diagrams. Supply of Fuse block made of PBT as per IRS:S-75/2006 Rev 2 & drg.No. SA-23748. RDSO along with supply of Non deterioting type fuses as per IRS-S-78/92 to suit the bases supplied of Capacity as per requirement and wiring diagram - in quantity as per requirement. This includes replacement of fuses blown off during testing and commissioning. This also includes supply of negetive bus bar of copper as per requirement on fuse rack and practice of the Railway. Supply of Flexible Wire Copper multistrand, 16 Sqmm, PVC insulated insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 1.21 ohms per Km at 20 degree Centigrade; over all core diameter 8.45mm0.25; conductor diameter: 0.400mm0.005; Number of conductors:126 and test parameter as per specification no: IRS:S 76/89 Amendt-3 for wiring from IPS room to relay racks and power wiring in relay room in Red, Black, Green and Gray colours as per practice in railways - in quantity as per requirement for wiring between IPS to relay racks and between racks to racks and all other requirement as per Engineer. Supply of Prewired crank handle cum key lock relay box along with LED, push button, ENGINEER terminal strip etc as per drg no.RVNL/S&T/SK/FIELD/11 suitable for 6 crank handle relay per box. DATALOGGER-SUPPLY
38456
38501
Supply of Centralized Monitoring Data Logger at Control Office as per specification No: RDSO IRS: S- 99/2001 with latest amendments for centralized acquisition of data from individual remote EI's & RRI's. This includes supply of suitable front end processor, failure analysis and network management software, UPS, Printer, central monitoring unit etc. for on line monitoring. The system should be compatible with the system in adjoining section.
38502 a
This includes Supply of Networked Data Logger for monitoring status of important relays, complete with RDSO processor module to monitor 512 digital and 32 analog inputs as per spec. IRS:S-99/2006 with Amndt-2 or latest including CMU, power supply of adequate capacity, battery, modems and fault diagonostic software for failure analysis, President rack of suitable size.
Supply of one no. composite computer-printer table,UPS and Printer and one no operator RDSO chair. In case of EI installation, this datalogger is for logging events outside of EI and full digital RDSO input must be supplied. Interface connection with EI is part of EI. The datalogger will transfer its own data along with EI data to central monitoring unit. Supply of Interconnecting cable between Contacts and Datalogger - this can be either RDSO 60/40 indoor cable or jumper wires as per requirement Supply of Interconnecting cable between CMU and Datalogger. This includes Supply of Networked Data Logger for monitoring status of important relays, complete with RDSO processor module to monitor 1536 digital and 64 analog inputs as per spec. IRS:S99/2006 with Amndt-2 or latest including CMU, power supply of adequate capacity, battery, modems and fault diagonostic software for failure analysis, President rack of suitable size. Supply of one no. composite computer-printer table,UPS and Printer and one no operator RDSO chair.
e 38503 a
d e
In case of EI installation, this datalogger is for logging events outside of EI and full digital RDSO input must be supplied. Interface connection with EI is part of EI. The datalogger will transfer its own data along with EI data to central monitoring unit. Supply of Interconnecting cable between Contacts and Datalogger - this can be either RDSO 60/40 indoor cable or jumper wires as per requirement Supply of Interconnecting cable between CMU and Datalogger.
38504
Supply of Remote Terminal Units (RTUs) in 64 Digital and 16 Analog inputs to be provided RDSO at LC Gates, Auto section Goomties, end Goomties of stations as per IRS :S-99/2006 or latest having interface capabilities with Data logger at stations on both sides using the existing VF channel. Supply of Interconnecting cable between Contacts and Datalogger this can be either 60/40 indoor cable or jumper wires as per requirement
38551 a
BLOCK INSTRUMENT - SUPPLY This includes supply of: Supply of SGE type double line block instrument complete as per IRS S :-22/91 along with RDSO bell unit - in quantity 01 no. Supply of Block bell equipment to Specification IRS (TC) 44/88. in quantity 01 no per RDSO block instrument Supply of Filter unit to Specification IRS(S) 68/89 - in quantity 01 no per block instrument RDSO
Supply of DC polarized 3 position biased BPR relay IRS-S-31/80 amndt-1 - in quantity 01 RDSO no per block instrument Supply of Wooden block counter of size 700mm x 700mm W X 900mm H made of teak ENGINEER wood frame and 10mm/20mm thick water proof ply with Formica finish on top and all four sides having two compartment inside and two doors on opposite sides as per drg. No RST/C/110 - in quantity 01 no per block instrument
Supply of VF Transformer of various types 470:470, 470:600, 470:1120, 600:1120: ENGINEER 600:600, 1120:1120 etc. as per requirement - in quantity as per requirement. Supply of Fuse block made of PBT as per IRS:S-75/2006 Rev 2 & drg.No. SA-23748. RDSO along with supply of Non deterioting type fuses as per IRS-S-78/92 to suit the bases supplied of Capacity as per requirement and wiring diagram - in quantity as per requirement. This includes replacement of fuses blown off during testing and commissioning. This includes supply of: Supply of Daido type single line token less block instruments complete with relays, RDSO transmitter, receiver etc as per RDSO specn.no.S-98-2001. Supply of Filter unit to Specification IRS(S) 68/89 - in quantity 01 no per block instrument RDSO
38552 a
Supply of Wooden block counter of size 700mm x 700mm W X 900mm H made of teak ENGINEER wood frame and 10mm/20mm thick water proof ply with Formica finish on top and all four sides having two compartment inside and two doors on opposite sides as per drg. No RST/C/110 - in quantity 01 no per block instrument Supply of Fuse block made of PBT as per IRS:S-75/2006 Rev 2 & drg.No. SA-23748. RDSO along with supply of Non deterioting type fuses as per IRS-S-78/92 to suit the bases supplied of Capacity as per requirement and wiring diagram - in quantity as per requirement. This includes replacement of fuses blown off during testing and commissioning. Supply of UFSBI (2 nos. as per RDSO/SPN/147/2005 with latest amendments), SMs RDSO Panel for single line (2 nos as per RDSO/S/32019), block telephone & Relay Rack with due locking & sealing arrangement completely wired fully with all relays required for Block working with Axle Counter & suitable for RE area as per RDSO Specn. No. RDSO/SPN/188/2004 with latest amendment. INTEGERATED POWER SUPPLY - SUPPLY
38553
38601
Supply of Integrated Power (IPS) SMPS based as per RDSO specn. No. RDSO RDSO /SPN/165/2004 with Amendment 5 or latest. This shall be suitable for EI/PI in RE Area. It includes supply of 55 no. of low maintenence batteries of 300 AH, 2 volts each to RDSO spn.no.IRS:S-88/2004 with connector and cable and remote indication panel with additional 5 nos spare batteries, wooden battery stand, hydrometer, RDSO prescribed tool kit and necessary spares. Before supplying the same the overall rating of the IPS system shall be designed and worked out by the tenderer as per the yard requirements, Indoor load, distance of the gears at the site etc. The design then shall be got approved by the Engineer. The tentative capacity of the IPS shall be ( SMR - 20Amp - 5nos, Inverter & CVT - 2.5 KVA, TX-signal - 4 no, track circuit - 2 nos, lcgate - 1 no, DC-DC converter for Internal, External, Axle counter, Block line, Block tele, Block local, Panel indication, ICC etc.). Supply of Integrated Power(IPS) SMPS based as per RDSO specn. No. RDSO RDSO /SPN/165/2004 with Amendment 5 or latest. This shall be suitable for Midsection LC gate/ IBH/Auto section in RE Area. It includes supply of 55 no. of low maintenence batteries of 120 AH, 2 volts each to RDSO spn.no.IRS:S-88/2004 with connector and cable and remote indication panel with additional 5 nos spare batteries, wooden battery stand, hydrometer, RDSO prescribed tool kit and necessary spares. Before supplying the same the overall rating of the IPS system shall be designed and worked out by the tenderer as per the yard requirements, Indoor load, distance of the gears at the site etc. The design then shall be got approved by the Engineer. The tentative capacity of the IPS shall be ( SMR - 20Amp - 3nos, Inverter & CVT - 1 KVA, TX-signal - 3 no, track circuit - 1 nos, lcgate - 1 no, DC-DC converter for Internal, External, panel indication, Hooter, gate telephone ICC etc.).
38602
38603
Supply of Single Phase Air Cooled, Silent DG set ( CPCB approved acoustic enclosure) RITES with alternator of 10 KVA, 0.8 PF and engine of minimum 16 BHP (multi cylinder) floor mounting type for installation in open complete with electrical control panel containing ammeter, voltmeter indicators, MCB/MCCB and key start/stop assembly, low maintenance battery of 12V-80AH as per IRS S-88/2004 of Standard/Exide/Amco type, battery charger for charging the battery. It also include provision of diesel tank of sutiable capacity to run minimum 10 hours fitted with a cock, supply pipe arrangement & its fixtures, clamps etc. for supplying diesel oil to the Diesel Engine from this tank. The engine ratings are as per IS 10001, BS 5514, DIN 6271, ISO 3046 standars. The DG set ratings are as per ISO 8528 standards and are continuous ratings at STP conditions with 10% overload for 1 hour during 12 hours continuous running.
38604
Supply of Single Phase Air Cooled, Silent DG set ( CPCB approved acoustic enclosure) RITES with alternator of 15 KVA, 0.8 PF and engine of minimum 25 BHP (multi cylinder) floor mounting type for installation in open complete with electrical control panel containing ammeter, voltmeter indicators, MCB/MCCB and key start/stop assembly, low maintenance battery of 12V-80AH as per IRS S-88/2004 of Standard/Exide/Amco type, battery charger for charging the battery. It also include provision of diesel tank of sutiable capacity to run minimum 10 hours fitted with a cock, supply pipe arrangement & its fixtures, clamps etc. for supplying diesel oil to the Diesel Engine from this tank. The engine ratings are as per IS 10001, BS 5514, DIN 6271, ISO 3046 standars. The DG set ratings are as per ISO 8528 standards and are continuous ratings at STP conditions with 10% overload for 1 hour during 12 hours continuous running.
38651
OUTDOOR CABLES - SUPPLY Supply of Railway underground jelly filled , 0.9 mm dia, 6 Quad cable as per spec. No. RDSO TC/30/2005 Amndt-2 or latest. Supply of PIJF-Polythene insulated polythene sheathed jelly filled telephone cable with RDSO poly-AL moisture barrier with armoured of size: 05 PAIR X 0.63 MM. as per specification IRS:TC-41/97 amendment no. 1 or latest
38652
38653
Supply of PIJF-Polythene insulated polythene sheathed jelly filled telephone cable with RDSO poly-AL moisture barrier with armoured of size: 10 PAIR X 0.63 MM. as per specification IRS:TC-41/97 amendment no. 1 or latest Supply of PIJF-Polythene insulated polythene sheathed jelly filled telephone cable with RDSO poly-AL moisture barrier with armoured of size: 20 PAIR X 0.63 MM. as per specification IRS:TC-41/97 amendment no. 1 or latest Supply of PIJF-Polythene insulated polythene sheathed jelly filled telephone cable with RDSO poly-AL moisture barrier with armoured of size: 50 PAIR X 0.63 MM. as per specification IRS:TC-41/97 amendment no. 1 or latest Supply of PIJF-Polythene insulated polythene sheathed jelly filled telephone cable with RDSO poly-AL moisture barrier with armoured of size: 50 PAIR X 0.9 MM. as per specification IRS:TC-41/97 amendment no. 1 or latest Supply of 24 fibre armoured optic fibre cable as per specification no.IRS.TC.55/2006 RDSO Rev.1 with Amdt.1.1 or latest. CABLE PROTECTION WORK - SUPPLY Supply of RCC pipes 150mm dia, 2 Mtr long along with collars as per Specn. No. ENGINEER IS/458/1971 for use near OHE Substation for cable protection. Supply of DWC pipe with one snap fit coupler and 'O' ring conforming to IS 14930 (part 2 : RITES 2001), Non metallic, corrugated, multiwalled, normal duty, pliable, without protection against chemical attack and Non flame propagating in 6 meter length of size 120 mm outer dia & 102 mm inner dia.( Permitted tolerance in dia = +/- 2 mm). Supply of SPLIT DWC pipe conforming to IS 14930 (part 2 : 2001), Non metallic, RITES corrugated, multiwalled, normal duty, pliable, without protection against chemical attack and Non flame propagating in 2 meter length of size 200 mm outer dia & 175 mm inner dia.( Permitted tolerance in dia = +/-2 mm) ( TWO half round pipe constitute one split pipe)
38654
38655
38656
38657
38701
38702
38703
38704
Supply of Galvanized Iron pipe 100 mm dia medium grade with screw end both side and RITES fitted with sockets as per specn. No.IS-1239, part 1 / 1990 in length of approx 6 meters
38705 a
This includes: Supply of theromoshrinkable jointing kits as per RDSO Spec. No. IRS. TC77-2000/Amdt.1 RDSO ( or latest) suitable for 6 quad cable Supply of 2T type small VF transformer (470:1120) for quad derivation joints suitable for 6 ENGINEER quad cable - required only for derivation joints. Making of Joint on Quad cable as Straight through joint with out transformer or derivation ENGINEER joint with 2T Transformer as directed by engineer at site.The derivation joint includes tapping of nominated quad of 6 quad cable at specific location to 10 pair PIJF cable already laid in the ground. This also includes supply of all other materials required for the work. After jointing the cable thorough test such as insulation test, continuity test etc., to be carried out jointly with Engineer and in case of defective joints, same will be rejected along with jointing material. COLOUR LIGHT SIGNALS - SUPPLY Supply of Colour light signal (2 aspect) as per drg.No.SA - 23003 A/M (adv.) alt.8 & Specn. RITES IRS-S-23/86 & 26/64 having following items (a)Signal post 140 mm dia 4.5 / 3.5 mtrs. Long to IRS-s-6-81. (b) Signal base C I 140 mm dia. to drg. No.S-2011. (c) CLS ladder complete with platform and Signal front staging as per Drg, base 4.5 / 3.5 mtrs. long to drg.No.SA23153 (Adv.) Alt 1. (d)CLS unit 2 aspect complete to drg.No SA 23003 A/M to C/M (Adv.) without transformer & lenses. (e)4 nos of Anchor bolt complete with nut washer etc as per Drg (f) Supply of Universal lock with key (hand cuff) - 1 no
b c
38751
38752
Supply of Colour light signal (3/4 aspect) as per drg.No.SA23002 A/M (adv.) alt.8 & Specn. RITES IRS-S-23/86 & 26/64 having following items :(a) Signal post 140 mm dia 4.5 /3.5mtrs. long to IRS-S-6-81. (b)Signal base C I 140 mm dia. to drg. No.S-2011. (c) CLS ladder complete with platform and signal front staging as per Drg , base 4.5 / 3.5 mtrs. long to drg.No.SA-23153 (Adv.) Alt 1. (d)CLS unit 3/4 aspect complete to drg.No.SA 23002 A/M to C/M (Adv.) without transformer & lenses. (e)4 nos of Anchor bolt complete with nut washer etc as per Drg (f) Supply of Universal lock with key (hand cuff)
38753 a
This includes: Supply of Junction type route indicator (1 way) along with out lamp holder unit, lens,& RITES lamps to IRS-S-66/84, Amndt-1 or latest, IRS-S-23/86 with drg.No. SA-23401 (adv.) alt2. suitable for LED lamps. Supply of OFF set bracket of main signal for 140mm dia drg no.SA-23080 (Adv) Alt.1 IRS- RITES S-10-78 along with U Clamp and nuts. - 1 no Supply of Universal lock with key (hand cuff) - 1 no RITES This includes: Supply of Junction type route indicator (2 way) without lamp holder unit, lenses & lamps to RITES IRS-S -66/84, Amndt-1 or latest, IRS-S-23/86 with RDSO drg.No.SA-23402 (adv.) alt2. suitable for LED lamps Supply of OFF set bracket of main signal for 140mm dia drg no.SA-23080 (Adv) Alt.1 IRS- RITES S-10-78 along with U Clamp and nuts. Supply of Universal lock with key (hand cuff) RITES This includes: Supply of Junction type route indicator (3 way) without lamp holder unit, lenses & lamps to RITES IRS-S -66/84, Amndt-1 or latest, IRS-S-23/86 with RDSO drg.No.SA-23403 (adv.) alt2. suitable for LED lamps
c 38754 a
c 38755 a
Supply of OFF set bracket of main signal for 140mm dia drg no.SA-23080 (Adv) Alt.1 IRS- RITES S-10-78 along with U Clamp and nuts. Supply of Universal lock with key (hand cuff) RITES Supply of Independent shunt signals complete having following items. (a) Shunt signal RITES post 90 mm dia 1m long to IRS-S-6/81 (b) Shunt signal surface base 90 mm dia drg.No. S2011 (c ) Position light shunt signal unit without lenses, LED unit to RDSO drg.No.SA23840 (Adv) (d)4 nos. Anchor bolts complete (305 mm x 50mm x 20mm) to drg. No.SA110A/M (f) Supply of Universal lock with key (hand cuff)
c 38756
38757
Supply of Dependant type Position light shunt signal unit without lenses, LED unit drg no. RITES SA-23840 (Adv) Alt.1 & S-23845 (Adv) Supply of OFF set bracket of shunt signal for 90mm dia along with U Clamp and nuts. RITES
b c 38758
Supply of Universal lock with key (hand cuff) RITES Supply of Calling on signal unit suitable for LED lamp as per RDSO drg.No.S-23463 & RITES fixing arrangement having RDSO drg.No.SA-24351 (adv.) alt.1. Supply of AC LIT LED signal lighting unit for main signal as per RDSO/SPN/153/2004 Rev RDSO 3 or latest. This shall also include current regulator, health monitor & alarm unit. Signal shall be suitable to CLS as per RDSO drawing no. SA-23002 and as 23024/M with latest amendment - The colour of aspect to be decided based on the Signalling Plan and as per requirement. Supply of AC 110 V LIT LED signal lighting unit as per RDSO Spn no:RDSO/Spn/153/ RDSO 2004 rev 3 or latest for junction type route indicator/ shunt/ calling-on.
38759
38760
38801
DC TRACK CIRCUIT - SUPPLY This includes:
Supply of Track feed battery charger 110V AC/6 V DC - suitable to charge 3 cells of 80 RDSO AH, to IRS-S-89/93 amndt-2 or latest. - 1 no Supply of `B' type choke as per specification No.IRS-S-65/83 amndt-1 or latest. - as per RDSO requirement - Nil in Non RE Area, One in AC RE Area, Two as per Railway Practice
Supply of adjustable Track Feed Resistance (Disc type) 30 ohms as per RDSO Drg. No. RDSO SA 20166/M (Adv) with latest amendments (with Phenolic moulded base). - 1 no Supply of Relay DC track plug in type neutral, 9 ohms, tractive armature 2 F/1B with front RDSO contacts metal to carbon (QT2 type in Non RE and QTA 2 type in RE area) complete with plug board, retaining clip and connector to BRS-939A, and BRS-966(appendix F-2), IRS-S34/68 & IRS-S-23/86. Interlocking code F,G,H,K,X. - 1 no Supply of Relay DC plug in neutral line slow to pickup tractive armature 24 VDC 8F/ 4B RDSO contacts, front & back contacts metal to carbon complete with plug board, retaining clips & connectors etc. to BRS-933/933A, IRS-S-34/68, IRS-S-23/86 & IRS-S-60 similar to QSPA1 interlocking code ABDEJ -1 no Supply of Fuse block made of PBT as per IRS:S-75/2006 Rev 2 & drg.No. SA-23748. RDSO along with supply of Non deterioting type fuses as per IRS-S-78/92 to suit the bases supplied of Capacity as per requirement and wiring diagram - in quantity as per requirement. This includes replacement of fuses blown off during testing and commissioning. Supply of Lead acid low maintenance secondary cells of 2V/ 80 AH along with connecting RDSO links, floats & insulators as per RDSO specification No.IRS-S-88/2004 - 3 no. of batteries per track Circuit ELCTRIC POINT MACHINE - SUPPLY This includes:
38811
Supply of Electrical point operating machine - IRS Type, 220 mm throw (AC immunity 160 RDSO V AC), non trailable to operate on 110 V DC with lock & detector slides, Cable terminal box and Clamp lock arrangement for thick web switches (Drg no. RDSO:S-3395 & S-3454) confirming to IRS:S-24/2002, Drg no: S-11000 & for Motor IRS: S37/82.
Supply of Ground Connections for thick web switches - 1 complete set per point machine
RITES
38812 a
This includes: Supply of Electrical point operating machine - IRS Type,143 mm throw (AC immunity 160 RDSO V AC), non trailable to operate on 110 V DC with lock & detector slides, Cable terminal box confirming to IRS:S-24/2002 & for Motor IRS: S37/82, Assy Drg RDSO-S:10800 & S:10910 Supply of Ground connection for 143 mm throw IRS type machine complete (5 rods) as RITES per drg no. (I) SA 8805 (II) RDSO/S/3273 (III) RDSO/S/3271 (IV) RDSO/S/3267 (V) RDSO/S/3269, switch extension bracket RDSO/S/3264 & drive lug S 8806. - 1 complete set per point machine LOCATION BOX WORK - SUPPLY This includes: Supply of Location box made of 10 SWG (3.2mm) sheet complete with È' type lock & RITES keys , 1key for every five apparatus cases to be supplied. (Full Location ) as per drg with Additional (i) fixed handle on door (ii) Provision for external padlock arrangement.(iii) Suitable arrangement for holding the door at 90 in its open condition.
38821 a
Supply of Hylam sheet (Bakelite industrial laminated paper based sheet), resin bonded 10 RITES mm thick, grade P3 in standard size of 1.22 x 1.22 mtrs. as per specn. No. IS 2036 of 1974. -as per requirement for termination of cables and for shelf for fixing equipments
c 38822 a
Supply of Universal lock with key (hand cuff) - 2 no
RITES
This includes: Supply of Location box made of 10 SWG (3.2mm) sheet complete with È' type lock & RITES keys , 1key for every five apparatus cases to be supplied. (Half Location ) as per drg with Additional (i) fixed handle on door (ii) Provision for external padlock arrangement.(iii) Suitable arrangement for holding the door at 90 in its open condition.
Supply of Hylam sheet (Bakelite industrial laminated paper based sheet), resin bonded 10 RITES mm thick, grade P3 in standard size of 1.22 x 1.22 mtrs. as per specn. No. IS 2036 of 1974. -as per requirement for termination of cables and for shelf for fixing equipments
c 38823
Supply of Universal lock with key (hand cuff) - 2 no
RITES
Supply of ARA Terminal blocks with links, 6 Way, made of PBT Specn No.IRS/75/2006 RDSO (Amd - 2) and RDSO Drg.No.SA-23756 Alt.3. MODULAR TERMINALS: Supply of 4-conductor disconnect terminal block with test & ENGINEER measurement facility, with screw clamp/screwless cage clamp connections suitable for 1.5 to 2.5 sq. mm conductor with current carrying capacity of 16Amp as per RDSO Specn. no. RDSO/SPN/189/2004 of WAGO/PHOENIX type.This also include Supply of required quantity of (i) End Plate (ii) Din Rail (iii) End Stop (iv) Marker & operating tool. End Plate, DIN rail, End stop and marker to be supplied only in the required quantity for above mentioned MODULAR terminals. All samples to be approved by engineer in charge before placing order on vendor. LEVEL CROSSING GATE - SUPPLY This includes:
38824
38851
Supply of Electrically operated lifting barrier assembly each consisting of 2 Nos. of RDSO electrically operated lifting barriers complete with all accessories as per IRS-S-41/70 (Amd2). Aluminum boom in 4 section of 8 feet long each along with Gate control panel & indication panel on sheet metal fabricated box , supply of power contactors, flasher relays etc. Dual tone warning bell (hooter) with 20 Watt Horn and 15 Watt amplifier MUCONY TYPE ENGINEER or similar with operating voltage 110 V A/C - 1 set This includes: Supply of Lifting barrier Gate complete (Fracture segements)with 10 Meters long boom RITES with winch, boom locking arrangement, interlocking frame ground type - two lever, pedestals, stop boards, boom light boxes, CI counter weights, boom supports, gate lamps, bells, insulated rod joints butt end, insulation material, screw joints, Foundation type-A, wire rope (7X7X19), circuit controller, pulley stake complete with 2 way pulley assembly, horizontal rope wheel -2way, vertical rope wheel, rubber insulator, wire adjusting screw 12m long range, E type lock and all associated accessories as per RDSO Drg No. REFERENCE RDSO DRG NO. for above items are: SA-8835 ALT-1, SA-8132A ALT-1, SA923/M ALT-1, SA-922/M ALT-1, SA(325,326,327)/M ALT-1, SA-3622/M, S-3529/M, S3065/M, S-3054/M, SA-3051/M, SA-3001/M, SA-3005/M, SA-3008/M, SA-3009/M, SA6065/M as per IRS: S-10/78 & IRS:S28 Dual tone warning bell (hooter) with 20 Watt Horn and 15 Watt amplifier MUCONY TYPE ENGINEER or similar with operating voltage 110 V A/C - 1 set
38852 a
38901 a
MISCELLANEOUS WORK - SUPPLY This includes: Office chairs of model no CH-1007 of Godrej or equivalent model of same make. - 2 no
ENGINEER
Office tables of model no T9 of Godrej or equivalent model of same make. with 3 drawers ENGINEER on left hand side & one locker on the right hand side. Olive brown/green with duplicate keys. -1 no Airy revolving & tilting working cushion chair with arm rests of model no PCH 7002 of ENGINEER Godrej make or equivalent of same make. -1 no Supply of steel almirah - office storwel of Godrej make or equivalent model of same make. ENGINEER Size 1980 x 915 x 486 approx with 4 shelves making 5 compartments without locker having locking door. -1 no Steel stool Godrej make or similar ST-2 or equivalent -4 no. ENGINEER
e 38921
Supply of Electronic magneto telephone desk type as per specn.No.IRS :TC79/2000.with ENGINEER latest amendment Supply of Various types of markers as:-P/C/G/A/IB markers -23 cm. Dia circular disc made RITES of 3mm thick MS Sheet. The disc shall be painted with approved colour scheme.
38922
38923
Supply of Tools for testing - Digital multimeter of fluke make- 1no, Digital Clamp type AC & ENGINEER DC Ampere Meter - Fluke make- 1no. Supply of Maintenance tool kit complete as per list attached. ENGINEER
38924
39001 a
ELCTRONIC INTERLOCKING WORK- EXECUTION This includes : Supply of Documents/Manuals for EI System as per para 10.1 of RDSO Specification ENGINEER No:RDSO/SPN/192/2005 Earthing of EI Equipment, Relay Racks and Power Equipment etc. to be done along with RDSO supply of all requisite materials as per EI requirement, RDSO directives and Signal Engineering Practice for lightening protection.
Supply of Flexible Wire Copper multistrand, 16 Sqmm, PVC insulated insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 1.21 ohms per Km at 20 degree Centigrade; over all core diameter 8.45mm0.25; conductor diameter: 0.400mm0.005; Number of conductors:126 and test parameter as per specification no: IRS:S 76/89 Amendt-3 for wiring from IPS room to EI room and power wiring as per site requirement.
Installation, Wiring, testing, Soldering of all EI equipments with contractor's material ENGINEER including wiring & soldering of panel, relays, Gumties (where ever provided) and bringing the functions up to CT Rack in same room. Supply of all related consumable materials like rosin core, lacing thread, PVC bunching ENGINEER tape and buttons eyelets of sizes,.etc. Power wiring of all EI equipments, laying of power cable from IPS room to EI room and to ENGINEER all other associated functions like panel processors, interface relay racks, datalogger, maintenance terminals etc. Contractor's Testing and organising testing for RVNL/Railway. The testing includes - ENGINEER Functional testing, selection table testing with contractor's simulation panel. Training (at site and/or works) is to be organised for two types of modules: Module (1) is for Field Technicians & Engineers & Module (2) is for Engineers and Officers of RVNL/Railway. The training module covers Installation, Commissioning, testing and maintenance and include supply of hard copies of course modules Commissioning of Electronic Interlocking system after interfacing of indoor equipments ENGINEER with outdoor gears in association with Railway Personnel during Non Interlock working. Competent Engineer of manufacturer must be available during Pre NI, NI and Post NI.
39002
39003
AXLE COUNTER WORK - EXECUTION
39101
Installation, wiring, testing & commissioning of new Digital axle counter system. Outdoor ENGINEER work includes : Fixing of track transducers on the rails. Drilling of holes in rails. supply and laing of HDPE pipe, Laying of track transducers cable from rail to EJB in HDPE pipe and from EJB to Location box by digging/trenching as per instruction of Site Engineer. Installation of electronic junction box in location box. Termination of cables & wiring of EJB. Indoor work includes: Installation of Evaluator, wiring and termination of quad cable. Laying & termination of cable from C.T.rack to evaluator. Fixing of relays, bus bars & fuses.Installation, wiring, testing & commissioning of reset box & line verification box in SM room / cabin. This includes: Fixing of reset box/line verification box on Wooden/hylam sheet. Supply & fixing of MS angles. RDSO Check list for installation are to be complied by manufacturer's engineer.
39102
Shifting & adjustment of existing Multi section digital axle counters - Decommissioning and ENGINEER Shifting of EJB, Evaluators,reset box, LV box and Refixing of these equipments along with fixing of existing/new TX / RX coils at new locations where ever required in HDPE pipe along with supply of HDPE pipe. Rewiring of above equipments, reprogramming of digital axle counter, power wiring, testing and commissioning the same as directed by site Engineer. If required Engineer from manufacturer need be called.
39103
Shifting & adjustment of existing analog axle counters/SSDAC - Decommissioning and ENGINEER Shifting of EJB, Evaluators,reset box, LV box and Refixing of these equipments along with fixing of existing/new TX / RX coils at new locations where ever required in HDPE pipe along with supply of HDPE pipe.. Rewiring of above equipments, power wiring, testing and commissioning the same as directed by site Engineer. DESIGN AND DRAWING WORK - EXECUTION
39301
DESIGN OF SIGNAL INTERLOCKING PLAN: Designing of signaling arrangements based ENGINEER on approved ESP as per practice of Railway. This includes correction at various stages as per requirement of RVNL /Railway. Plotting of designed Interlocking Plan(IP) in AUTOCAD. Correction as per requirement. Submission of as required white prints of IP as per scale being followed by Railway. Submission of tracing of Final approved SIP on 90gsm tracing paper. Following description remains common for all the items covered in item no 39302 to 39305. This include: DESIGN & DRAWING : Design Includes all gears of the station like Block, panel, LC gate, ENGINEER ICC, etc as indicated in Signal Interlocking Plan- INDOOR: Design, preparation & supply of prints in Auto CAD format of various documents /diagrams /sketches listed below in A3 size for stations. The Contractor shall initially supply 2 sets of complete documents/circuits duly signed by the designer for approval of Railways. Designer has to coordinate with Approving authority to understand the local Railway's practice and carry out modifications accordingly. Railways will return one set of documents/circuits to the contractor duly approved with alteration/corrections if any. The contractor shall incorporate Railways alterations/corrections in the original tracing & CD without any deviation and submit 3 prints of complete document/circuits. The work shall be executed only as per approved final documents/circuits. After ENGINEER completion of work the contractor shall submit Completion tracings modified as per completed work, After approval of tracings, final completion CD complete in all respect along with 6 sets of prints of completion documents/ circuits along with approved tracings shall be submitted. The papers used for tracing and prints should be of superior quality. Transparent polythene covers duly covering each sheet of one set of print out of 6 sets of prints of completion documents/circuits shall be supplied. Note: The Size of SIP, Front Plate Diagram and Route section diagram may be in different sizes as per the requirement and practices of the Railway.
39302 to 39305 a
INDOOR DRAWINGS: List of Documents (Only the required drawings):- Front Panel ENGINEER Diagram, Route section diagram, Locking Table, Station Working Rule Diagram, Contact analysis, Application Programme listing/Wiring Diagram, Input/Output chart along with all logic details with proper contact analysis, Record of one wire/two wire termination on tag block, Power Supply, Equipment layout particulars in Relay room and Equipment rooms, Relay disposition diagram in Relay room, CT rack details, Completion documents like I.P., LT etc. Design and drawing for complete indoor signalling work for new PI/EI/RRI station, as per ENGINEER practice in Railway. Design and drawing for complete indoor signalling work associated with modification in a ENGINEER PI/EI/RRI station, due to work of doubling or third line or junction arrangement or due to 25 KV Railway Electrification etc. Design and drawing for complete indoor signalling work for IBH / Midsection interlocked LC ENGINEER gate/ C class station/ One Auto Section etc. PHASE DRAWINGS: Designing the modification to existing approved SIP, LT, PD, SWR ENGINEER and logic and wiring in EI OR wiring circuits in PI to suit proposed Yard Layout in connection with phase working while extending doubling / Third line as per work requirement. NOTE: This item to be operated while commissioning of doubling/ third line at one end of the yard and other end will remain as existing single/double line/ third line to facilitate development of phase drawings and phase commissioning. This includes: Preparation of Station Working Rules as practice in Railways including Gate working rules ENGINEER and appendix (in multiple language wherever required) and its subsequent corrections. 10 copies of Station Working Rules to be given along with the soft copies.
39302
39303
39304
39305
39306 a
Preparation of CRS Papers along with Descriptive note, list of infringements from schedule ENGINEER of dimensions, list of deviations from G&SR, dispensation and condonation statement etc. as per practice in railways, obtaining signature of the authorities and submission to CRS. RVNL and PMC will assist in checking and obtaining signature and sanction from CRS. The Payment will be made for each application for Sanction submitted to CRS. Application for dispensation is part of CRS Application of yard. Following description remains common for all the items covered in item no 39307 to 39309. This include: DESIGN & DRAWING:Design Includes all gears of the station like Block, panel, LC gate, ENGINEER ICC, etc as indicated in Signal Interlocking Plan- OUTDOOR: Design, preparation & supply of prints in Auto CAD format of various documents /diagrams /sketches listed below in required size. The Contractor shall initially supply 2 sets of complete documents/circuits duly signed by the designer for approval of RVNL/Railways. Designer has to coordinate with Approving authority to understand the local Railway's philosophy and carry out modifications accordingly. They will return one set of documents to the contractor duly approved with alteration/corrections if any. The contractor shall incorporate these alterations/corrections in the original tracing & CD without any deviation and submit 3 prints of complete document/circuits. The work shall be executed only as per approved final documents. After completion of ENGINEER work the contractor shall submit Completion tracings modified as per completed work and approval of tracings & then submission of final completion CD complete in all respect along with 6 sets of prints of completion documents/ circuits along with approved tracings. The papers used for tracing and prints should be of superior quality.
39307 to 39309 a
OUTDOOR DRAWINGS: (Only required Drawings)- Cable route plan, Cable Coreage ENGINEER plan, Track Circuit bonding plan, Location box details plan, Junction box details, track circuit wiring arrangement, point machine wiring etc.. Any other drgs required by Engineer incharge.
39307
Design and drawing for complete Outdoor signalling work for new PI/EI/RRI station, as per ENGINEER practice in Railway. Design and drawing for complete Outdoor signalling work associated with modification in a ENGINEER PI/EI/RRI station, due to work of doubling or third line or junction arrangement or due to 25 KV Railway Electrification etc. Design and drawing for complete Outdoor signalling work for IBH / Midsection interlocked ENGINEER LC gate/ C class station/ One Auto Section etc. INDOOR PI/RRI WORK - EXECUTION This includes: Installation, complete wiring, testing and commissioning of LED type Control cum ENGINEER indication panel. This includes wiring & termination of indoor cables coming from relay room on panel tag blocks as per Panel Tag Block Analysis and instructions of Engineer. The wiring on panel tag blocks may be required to be repeated on tag blocks in relay room. If there is no common wall between panel & relay room the indoor cable can be laid in GI pipe as per instructions of Engineer at site. This covers supply of all material required. During testing fused LEDs are to be replaced immediately. After commissioning of Panel, cementing and plastering of panel base along with foundation/grouting etc. Manufacture, supply, transportation & installation of station masters console for fixing ENGINEER telephones & other equipment. This includes supply of all materials like MS angles, MS flat, plywood, hylum, sunmica etc. required for the above including sundry items like bolts & nuts, screws. This design shall be developed by contractor in consultation with site engineer. This includes: Erection & Installation of Cable Termination Rack Assembly complete with wall supports, ENGINEER scaffolding, 8 way/ ARA/Modular terminal, 96 way tag-block and other necessary accessories etc. The work shall be done as per approved plan, extent practice on Rly. and the instructions of Railway Engineer at site.
39308
39309
39451 a
39452 a
Termination of cable core in CT rack at 8Way/ARA/Modular terminal. This includes pulling ENGINEER out of cable from under ground, spilling of cable & fixing on the CT rack etc. and submission of cable termination particulars. Laying of indoor signalling cable on ladder, dressing, and terminating the same on Old and ENGINEER New CT rack, wherever required, to patch the Old Outdoor signalling cable in new installation. Installation of complete Relay Rack Assembly (Siemens style or Q-style) with wall support, ENGINEER Scaffolding, Ladders, Run way for cables, Fixing of Relay bases/ Relay group base plates, Tag blocks, fixing of ladder, relay plug boards, terminal, blocks. Laying, lacing, dressing and packeting of indoor cable/ flexible wire and soldering, Fuse block fixing, fuse wiring, function wiring, (interconnection between relay rack and CT rack). The work shall be done as per approved plan, extent practice on Rly and the instructions of Engineer at site. This includes supply of all nuts, bolts, MS clamps & cement for masonry works, lacing thread, PVC tape, solder rosin core etc. Complete Indoor work of installation, wiring and commissioning. This includes wiring of ENGINEER relay base plate to other base plate, to IDF, to tag block,wiring of circuits as per approved diagram, jumpering and soldering after testing. Wiring of block instrument with accessories,data logger, power equipment, operating panel, key lock, test board etc., fuse board etc. Contractor's Testing and organising testing for RVNL & Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the requirement of wiring diagrams. After completion of entire signalling and civil work, one round of acrlylic synthetic paint to be provided inside of Relay room and IPS room, whereever new rooms are constructed - FOR NEW PI/RRI STATIONS- UP TO 50 ROUTES
39453
39454
39455
Complete Indoor work of installation, wiring and commissioning. This includes wiring of ENGINEER relay base plate to other base plate, to IDF, to tag block,wiring of circuits as per approved diagram, jumpering and soldering after testing. Wiring of block instrument with accessories,data logger, power equipment, operating panel, key lock, test board etc., fuse board etc. Contractor's Testing and organising testing for RVNL & Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the requirement of wiring diagrams. After completion of entire signalling and civil work, one round of acrlylic synthetic paint to be provided inside of Relay room and IPS room, whereever new rooms are constructed -FOR NEW PI/RRI STATIONS- ABOVE 50 ROUTES
39456
Complete Indoor work of installation, wiring and commissioning. This includes wiring of ENGINEER relay base plate to other base plate, to IDF, to tag block,wiring of circuits as per approved diagram, jumpering and soldering after testing. Wiring of block instrument with accessories,data logger, power equipment, operating panel modification, key lock, test board etc., fuse board etc. Contractor's Testing and organising testing for RVNL & Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the requirement of wiring diagrams - RELATED WITH MODIFICATION IN EXISTING PI/EI/RRI STATIONS/Cabins OF UPTO 50 ROUTES as per Signal Interlocking plan for connecting double line/third line or due to 25 KV Railway electrifcation.
39457
Complete Indoor work of installation, wiring and commissioning. This includes wiring of ENGINEER relay base plate to other base plate, to IDF, to tag block,wiring of circuits as per approved diagram, jumpering and soldering after testing. Wiring of block instrument with accessories,data logger, power equipment, operating panel modification, key lock, test board etc., fuse board etc. Contractor's Testing and organising testing for RVNL & Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the requirement of wiring diagrams. RELATED WITHMODIFICATION IN EXISTING PI/EI/RRI STATIONS/Cabins OF ABOVE 50 ROUTES as per Signal Interlocking plan for doubling / third line/ yard remodelling or due to 25 KV Railway electrifcation Complete Indoor work of installation, wiring and commissioning. This includes wiring of ENGINEER relay base plate to other base plate, to IDF, to tag block,wiring of circuits as per approved diagram, jumpering and soldering after testing. Wiring of block instrument with accessories,data logger, power equipment, operating panel, key lock, test board etc., fuse board etc. Contractor's Testing and organising testing for RVNL & Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the requirement of wiring diagrams. After completion of entire signalling and civil work, one round of acrlylic synthetic paint to be provided inside of Relay room and IPS room, whereever new rooms are constructed - FOR ONE IBH / ONE MIDSECTION LC GATE / C CLASS STN/AUTO SECTION. Wiring at IBH/Auto/LC Gate includes associated signaling modification at stations/cabins/gates at either end. NOTE: The wiring may be required to be done much in advance of commissioning and make it functional for existing line, and subsequent modifications may be required to be done while commissioning new line.
39458
39459
Complete Indoor work of installation, wiring and commissioning. This includes wiring of ENGINEER relay base plate to other base plate, to IDF, to tag block,wiring of circuits as per approved diagram, jumpering and soldering after testing, power equipment, operating panel, key lock, test board etc., fuse board etc. Contractor's Testing and organising testing for RVNL & Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the requirement of wiring diagrams - FOR ONE TRAFFIC INTERLOCKED GATE without independent signals. PHASE WORKING: Complete Indoor work of Alteration to existing circuit OR Modification ENGINEER to existing Logic and Wiring in EI. This includes Wiring of relay base plate to other base plate, to IDF, to tag block, jumpering, function wiring up to CT rack, fixing of Relays, Wiring of Fuse, power equipment, block instrument, operating panel, keylock, testboard etc., fixing of ladder, relay plug boards, terminal, blocks, terminals fuse board, fuses bus bar, lacing of wires, fixing of eyelet, modification in operating cum indication panel to suit yard layout etc. as per approved diagram or Logic , testing & soldering after testing. Contractor's Testing and organising testing for RVNL&Railway -Functional testing, selection table testing with contractor's simulation panel. This includes supply of all related consumable materials like rosin core, lacing thread, PVC bunching tape and buttons eyelets of sizes,Resistance, condensor, diodes, LED's etc as per the existing arrangement in Relay rooms in connection with (a) modification from Double Line to Third Line related with extn of third line. OR (b) modification from Single Line to Double Line related with extn of Doubling. Fabrication and fixing of WHITE SUNMICA BOARDS of various sizes for track insulation ENGINEER plan, station working rule and other diagrams. The board shall be covered with transparent Perspex sheet in aluminium/steel frame, The boards shall be painted in different colour combination as per directions of Engineer. DATALOGGER WORK - EXECUTION
39460
39461
39501
EXISTING DATA LOGGER: Supply of new CMU Unit, Installation, rewiring, testing and ENGINEER commissioning of existing data logger with validation, reprogramming of fault table, software modifications etc. & testing as required by site in charge and commissioning with networking. This work may be involved with Shifting of existing data logger with its battery, networking equipments, accessories etc to new location after dismantling from existing place and transportation to new location. This includes either (a) or (b) Installation, Wiring ,testing and commissioning of Centralized monitoring of Data loggers at ENGINEER Control Office by linking all Road side dataloggers including conventional and EI Data loggers complete along with accessories with Contractor's own material. This includes programming of data logger for fault diagnostic in suitable structured language in consultation with Rly. Installation, wiring ,testing and commissioning of Data Logger along with RTU complete ENGINEER along with accessories with Contractor's own material. This includes programming of data logger for fault diagnostic in suitable structured language in consultation with Rly. BLOCK INSTRUMENT WORK-EXECUTION Installation, wiring & testing of block instruments (Single line/Double line) along with bell ENGINEER unit, filter, polarised relay and other accessories. The work involves supply of wiring material and wiring right from telecom DP to block instrument and Block instrument to relay room and connection with power supply including fuse wiring. This work may be involved along with releasing of complete existing SL/DL block instrument, relay, bell unit, filter, block counter and its accessory and its transportation to new location for further use. Installation, wiring & testing of axle counter based block panel for one complete block ENGINEER section along with bell unit, filter, relay and other accessories. The work involves supply of wiring material and wiring right from telecom DP to block Panel and Block Panel to relay room and connection with power supply including fuse wiring.This work may be involved along with releasing of complete existing SL/DL block instrument, relay, bell unit, filter, block counter and its accessory and its transportation to new location for further use. INTEGERATED POWER SUPPLY WORK - EXECUTION This includes:
39502 a
39551
39552
39601
Supply of Flexible Wire Copper multistrand, 25 Sqmm, PVC insulated, insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 0.780 ohms per Km at 20 degree Centigrade; over all core diameter 10.2 mm0.25; conductor diameter: 0.40 mm0.005; Number of conductors:196 and test parameter as per specification no: IRS:S 76/89 Amendt-3. For wiring of IPS and Battery in Red and Black Colour - quantity as per requirement of site and directions by Engineer Supply of all material, Fabrication and fixing of fuse/termination board made out of 10 mm ENGINEER thick Hylam sheet and fixed with FUSE BLOCKS/ ARA TERMINALS/ HIGH CAPACITY MODULAR POWER TERMINALS, laying and termination of power wires from IPS to this board and further extending supply to Relay room and outdoor functions as per instruction of engineer at site. Supply of Flexible Wire Copper multistrand, 16 Sqmm, PVC insulated insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 1.21 ohms per Km at 20 degree Centigrade; over all core diameter 8.45mm0.25; conductor diameter: 0.400mm0.005; Number of conductors:126 and test parameter as per specification no: IRS:S 76/89 Amendt-3. For wiring from IPS to fuse/termination board in Red&Black colour for DC supply, Gray for AC supply and Green for earth wire - in quantity per requirement of site and direction of Engineer. Installation, testing and commissioning of Integrated Power Supply (IPS) systems for ENGINEER stations / LC Gate/ IBH or at any other location. Initial charging of lead acid low maintenance batteries for IPS, Supply of sulphuric acid to approved specification, distilled water. Preparation of electrolyte. Charging & discharging of batteries ( 3 cycles). Wiring from Auto Change over panel to IPS and from IPS to Fuse/Termination board. Installation testing and commissioning shall be done by manufacturer as per RDSO guide lines/check list. All the prescribed protective equipments shall be installed. Connection to Earth shall be done as per RDSO prescribed standard.
39602 a
This include Supply of Flexible Wire Copper multistrand, 25 Sqmm, PVC insulated, insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 0.780 ohms per Km at 20 degree Centigrade; over all core diameter 10.2 mm0.25; conductor diameter: 0.40 mm0.005; Number of conductors:196 and test parameter as per specification no: IRS:S 76/89 Amendt-3. For wiring of IPS and Battery in Red and Black Colour - quantity as per requirement of site and directions by Engineer Supply of all material, Fabrication and fixing of fuse/termination board made out of 10 mm ENGINEER thick Hylam sheet and fixed with FUSE BLOCKS/ ARA TERMINALS/ HIGH CAPACITY MODULAR POWER TERMINALS, laying and termination of power wires from IPS to this board and further extending supply to Relay room and outdoor functions as per instruction of engineer at site. Supply of Flexible Wire Copper multistrand, 16 Sqmm, PVC insulated insulation thickness RDSO of 1.5 mm0.15; conductor resistance not exceeding 1.21 ohms per Km at 20 degree Centigrade; over all core diameter 8.45mm0.25; conductor diameter: 0.400mm0.005; Number of conductors:126 and test parameter as per specification no: IRS:S 76/89 Amendt-3. For wiring from IPS to fuse/termination board in Red&Black colour for DC supply, Gray for AC supply and Green for earth wire - in quantity per requirement and direction of Engineer Shifting of existing IPS complete with its associated modules and units and battery bank in ENGINEER the same building or at remote building. This includes dismantling of complete existing IPS with its associated modules and units and battery bank, transportation, Reinstallation, Wiring from Auto Change over panel to IPS and from IPS to Fuse/Termination board, wiring of batteries, topping up of battery electrolyte etc, testing and commissioning and earthing connections etc. Installation and Commissioning of Single Phase Diesel Generator Set. This includes ENGINEER transportation of DG set from one station/LC to another, repair and maintenance of DG set and supply of adequate quantity of diesel for operation of DG set to enable contractor/RVNL to test the signaling panel till such time the electric supply is made available. CABLE TRENCHING LAYING AND PROTECTION WORK - EXECUTION
39603
39651 a
This includes: Excavation of trenches at the depth of 1.0 Mtr. deep and 300 mm wide at the bottom of the Engineer trench including clearing of roots, bushes, or other obstruction etc. for all types of soils including Murrum, soft rock, hard soil mixed with boulders etc. as per cable route plan. Supply of Cable route marker FRP make as per drg no. RVNL/BPL/S&T/SK/FIELD/01 and Engineer fixing along the actual cable route after cable laying at regular intervals (not more than 200 mtrs on straight route) and at diversions and at other places as decided by site engineer. Minimum of 10 markers to be provided per KM. Complete back filling the trench after laying required quantity of cable,protection Engineer pipes/bricks, route marker etc and ramming and consolidation of soil as well as disposal of extra soil as per Drg No. RVNL/BPL/S&T/SK/FIELD/02 Excavation of cable trench of 1 m. depth & 300 mm. wide across the track crossing, road Engineer crossing, level crossing, platform & refilling after laying DWC pipe with collars as per cable route chart & technical specification as per Drg. Providing chase in hard rock deep enough to fix GI pipe for laying of S&T cable and Engineer minimum 100 mm concreting over GI pipe after providing suitable U clamp to GI pipe. Chase to be provided where optimum depth(minimum 0.6 mtrs) is not possible and which is verified and agreed by engineer in charge of the work or his representative NOTE: Where digging of depth as specified is not possible, the depth can be reduced with the approval of the engineer in charge and the payment shall be made proportionately
39652
39653
39654
Perforation ( 24 to 36 perforation in a pipe) and Fixing of GI pipes for entry of cable on Engineer girder bridges, RCC bridges, drains, culverts, rocky places tunnels/deep cutting or at places as advised by the engineer in charge of the work & concreting the ends with brick channeling at both ends as per drg. The pipes are to be fixed on the bridges by suitable bridge fixtures or MS clamps or brick support at an interval of 3.0 mts (max) or as per approved drawing and directives of Railway Engineers. On masonry bridges or in rocky place if required the entire length of the pipe by cement, sand and 15-25 mm chips. All the fixing materials nut & bolts, clamps, materials for construction of pillars. MS channel etc. will be supplied by the contractor. Fixing/Laying of RCC pipe(at TSS/SP/SSP), DWC pipes with collars for laying of cables in Engineer open trench or underneath the track, road, platform etc. as directed by Engineer and drg. Issued. Laying of various sizes and types of cables in trenches: Laying of signaling / power / Engineer telecom / quad/OFC cable of various sizes in the excavated trench and through laid pipes. This includes loading/unloading & transportation of cables to site. Whenever several cables are to be laid separation of cables should be as advised by site engineer. This includes unwinding of cable drum using proper jigs without causing damage to cable. Placing of half round ( Split DWC ) pipe over the laid cable in open trenches in yards Engineer between Home signal to Home signal and tieing pipe with cable with loose armouring as per Drg. Supply of 20 pair CT Box and fixing on Hylam board on wall and termination of quad/ Engineer telecom cable at station/ SP/ SSP/ TSS/ LC gate/ Relay room/ office/ residences as per requirement and details given by engineer at site. The CT box after termination shall be sealed by pouring paraffin wax. Testing of point to point insulation / continuity test for all laid out cables, Measuring Track Engineer Circuit Parameters, Measuring Point machine voltage and current parameters, IPS parameters, Axle counter parameters, Measuring Signal parameters for LED lamps as per RDSO check list and preparing the records in a bound register in approved format. COLOUR LIGHT SIGNAL WORK - EXECUTION This includes
39655
39656
39657
39658
39659
39751
Excavation of pit, fixing of foundation scaffolding, casting & plastering of concrete Engineer foundation, removal of scaffolding, water curing and earth filling for Colour Light Main Signal and Casting of cement concrete foundation for signal ladder as per drg. This includes : Supply of cement, sand, stone chip & mixing in the ratio 1:3:6. Erection of Multi aspect colour light signals. This includes : Erection of surface base, signal Engineer post, signal unit, junction type route indicator, and shunt signal on OFF set bracket, calling on signal, ladder with guard & platform, fixing of P/C/G marker, supply & fixing of Heat enammelled signal number plate & blanking-off signals as per the requirement. Making of holes in CLS post, supply of other minor material like clamps, nuts & bolts, wiring material etc. Fixing of signal lamps/LED's with accessories on 2/3/4 aspect signal unit, shunt, route, calling on unit as per the requirement. Termination of the tail cable in the signal units, wiring of signal and testing, focusing of signal etc.
39752 a
39801 a
This includes: Excavation of pit, fixing of foundation scaffolding, casting & plastering of concrete Engineer foundation, removal of scaffolding, water curing and earth filling for Independent Shunt Signal as per drg. This includes : Supply of cement, sand, stone chip & mixing in the ratio 1:3:6. Erection & wiring of shunt signal. This includes : Erection of surface base, shunt signal Engineer post, shunt signal unit. Supply & fixing of Heat enammelled signal number plate, Fixing of lenses, signal/LED lamp, supply and fixing of antitheft protection etc., where ever required. Termination of the tail cable, supply of wire & wiring of signal unit. Focusing and testing of shunt signal. DC TRACK CIRCUIT WORK - EXECUTION This includes: Supply of Power Wire PVC Insulated Single Core multistrand unsheathed with plain RDSO annealed copper conductor as per IRS:S-76/89 Amndt - 3, copper cable of 6 Sq. mm - for wiring in track circuit battery location box in Red & Black colour - in quanitity as per requirement at site and direction of engineer.
Supply of Power Wire PVC Insulated Single Core multistrand unsheathed with plain RDSO annealed copper conductor as per IRS:S-76/89 Amndt - 3, cable of 3 x 0.7 sq.mm. in Red& Black colour for wiring of Track charger, choke, resistance in location box - in quanitity as per requirement at site and direction of engineer. Supply of Cable indoor copper conductor plain annealed high conductivity 650V grade RDSO PVC insulated unarmoured IRS-S-76/89 Amndt - 3. - 16 x 0.2 sq.mm in approved colours. in quanitity as per requirement at site and direction of engineer. Supply of frame for fixing of relays - as per requirement Complete work of fixing of hylam sheet supplied with location box, fixing of track circuit equipment like battery chargers, track feed resistance, choke, relays, fuses, terminals, batteries etc. as per approved wiring diagram in location box/Gumties. Wiring of these equipments of track circuits with the above supplied wire, wiring of charged batteries etc., energisation, testing, adjustment of resistance and commissioning of track circuit as per Drg No. RVNL/BPL/S&T/FIELD/05 This includes: Supply of Channel bond pin (single groove,tinned or zinc coated 7mm dia), GI Bond wire soft(7 strand steel wire 8 SWG), PVC Jacketed wire rope(galvanized wire rope 6mm dia (6x19 standard wire with steel core sheathed with PVC 2 mm wall thickness, overall thickness 10 mm) Supply of Fibre glass track lead Junction boxes for termination of signaling cable as per drg. - as per requirement Engineer Engineer
d e
39802 a
Engineer
RITES
Supply of Nylon Insulation rail joint complete for 52/60 Kg. as per RDSO Drg. & as per RDSO specn.No.IRS-S-40/84 comprising of :2 Nos.-Channel side plate LH, 2 Nos.-Channel side plate RH, 1 No. End post, 4 Nos. insulating plate, 8 Nos. bushes. Initial Charging of 3 nos. of batteries of 80AH capacity supplied along with supply schedule Engineer for track circuits.
Installation, wiring, testing & commissioning of DC track circuits on track as per instruction Engineer of Site Engineer. installation of charged batteries, Drilling of 9/32" holes on rail, Providing, bonding & jumper connection as per track bonding plan. Fixing of track lead junction boxes & track lead connections. Supply of Erico type cable fastener and fixing by glue on Concrete sleppers. Machining of fish plate. Fixing of insulation joint. Energizing the track circuit and testing with 0.5 ohms train shunt resistance.This include all preparatory work of Glued joint bypass bonding, temporaray negetive bonding during NI and other physical adjustments before commissioning to enable existing Track circuit to continue and post commissioning bonding across old glued joint.
39811
POINT MACHINE WORK - EXECUTION Installation, wiring, testing and commissioning of point machine as per drawing.This Engineer includes fixing of point machines on MS plate fixed on sleepers complete with fixing of anti theft covers, junction boxes, ground connection, trap indicators, crank handle ward etc. where ever required. Supply and fixing of as required insulation for gauge tie plate and crossing plate, switch extension pieces (D brackets) and leading & following stretcher bars. Supply and fixing of GI bend pipes with welded frame for cable entry to machine. Termination of cable, supply of 3x0.7 wire and wiring of machine as per wiring diagram, adjustment & testing with crank handle operation. This will also includes necessary adjustment and smithy work, drilling of holes to tongue rails, supply of flat, angle, bolts, nuts, pins as required.Removal & refixing of fittings if required, Testing the point machines from point of operation including testing with 5 mm test piece. Complete work of excavation & Pulling out the old cable from existing point machines, Engineer supply and fixing of GI bend pipes with welded frame for cable entry to machine, provision of fabricated terminal boards for extra cables, insertion of old & additional new cable through GI bend pipe, termination of cable, supply of 3x0.7 wire and wiring of machine as per wiring diagram, adjustment & testing with crank handle operation, replacement of crank handle wards, testing the point machines from point of operation including testing with 5 mm test piece.
39812
39813
Supply,installation and wiring of Ground Frame, Electric point and lock detector, facing RITES point lock for a cross over siding point as per arrangement in SIP including supply of ITEMS materials like GF, EPD, FPL, E-type lock, Split stretcher bar,rodding run, all types of cranks, compensator, Rod joint with Nylon insulator, Solid joints etc as per RDSO drawing, Supply of nuts, bolts etc. Casting of foundations with cement, sand,and ballast. Erection, of GF, rodding run, crank and compensator, cutting of notches etc. Complete testing and interlocking with Panel. LOCATION BOX WORK - EXECUTION This include: Excavation of pit, casting of concrete foundations for SINGLE location box as per Drg no. Engineer RVNL/S&T/SK/FIELD/03. This includes:(a)Supply of cement, sand, stone chip & mixing in the ratio 1:3:6. (b)Supply of 4 Nos. foundation bolts as per Drg.No.SA-112A with Nuts & bolts. (c) Masonry work with brick platform shall be done where specifically asked for. Erection of Single location box on foundation with bolts and washer including fixing of È Engineer type lock, Supply and fixing of Universal lock on both side. Fixing of hylum sheet, fixing of terminals, fuse blocks, ND Fuses etc., termination of cables Engineer with no. embossed ferrules, bunching of cables with PVC tape, supply of ferrules, tape, including supply & fixing of PVC coated string rods at the back side for the cable support with contractor's own material, Supply and fixing of 2 pin lamp holder with switch. Preparing Hylam shelf as per requirement for placing equipment and batteries, Supply of frame for relay fixing, fixing of relay bases & relay etc. as per approved location box diagrams. Supply of 3x0.7 and 16/0.2 wiring material and wiring of terminals, fuse blocks, N.D. fuses, RDSO relays, lamp & switch etc and complete wiring , testing and commissioning of location box equipments. This include:
FOR
SUPPLY
39821 a
b c
39822
Excavation of pit, casting of concrete foundations for HALF location box as per Drg no. Engineer RVNL/S&T/SK/FIELD/03. This includes:(a)Supply of cement, sand, stone chip & mixing in the ratio 1:3:6. (b)Supply of 4 Nos. foundation bolts as per Drg.No.SA-112A with Nuts & bolts. (c) Masonry work with brick platform shall be done where specifically asked for. Erection of HALF location box on foundation with bolts and washer including fixing of È Engineer type lock, Supply and fixing of Universal lock on both side. Fixing of hylum sheet, fixing of terminals, fuse blocks, ND Fuses etc., termination of cables Engineer with no. embossed ferrules, bunching of cables with PVC tape, supply of ferrules, tape, including supply & fixing of PVC coated string rods at the back side for the cable support with contractor's own material, Supply and fixing of 2 pin lamp holder with switch. Preparing Hylam shelf as per requirement for placing equipment and batteries, Supply of frame for relay fixing, fixing of relay bases & relay etc. as per approved location box diagrams. Supply of 3x0.7 and 16/0.2 wiring material and wiring of terminals, fuse blocks, N.D. fuses, RDSO relays, lamp & switch etc and complete wiring , testing and commissioning of location box equipments. WORKING IN EXISTING LOCATIONS: Excavation of cable pit without damaging existing Engineer working cables, laying & insertion of new extra cables. Provision of additional terminals, fuse blocks, etc. on the Hylam board in the location. Drilling of holes in Hylam sheet for cables, retermination of existing cable on one side of terminal to keep present system working. Provision of additional Hylam board / shelf / adjustment / shifting of existing located equipments such as charger, relays, resistance etc. & rewiring the same. Meggering of cables, dressing of cables etc. Numbering & writing description of new circuit. Closing of excavated cable trench/Pit & plastering of foundation etc. under instruction from site Engineer. LEVEL CROSSING GATE WORK - EXECUTION Design fabrication & supply of Supply of Gate indication panel made of 16 SWG powder Engineer coated MS sheet of size 39cm x24 cmx10cm approx. consisting of different colour LEDs with holders to work on 24 V DC/60 V DC supply.( Diagram to furnished by Engineer)
b c
39823
39851
39852
Installation, wiring, testing and commissioning of Electrical/Mechanical Lifting Barrier, Engineer complete with casting of cement concrete foundation as per manufacturer's drawing for pedestal and boom rest, post, wire run, operating winch/Panel, Rodding, cabling, power supply connection, wiring in loc. box or in rack etc. Wiring of Hooter, Flasher and road signals. Supply, provision, fixing and wiring of Electric key transmitter and establishment of interlocking as per approved diagram. Shifting of existing power operated lifting barrier: Dismantling of one side lifting barrier and Engineer reerrecting the same at new location, insertion of new/additional/existing cables into lifting barrier, termination & wiring of the cables, adjustment of the circuit controllers. Excavation of pit and casting of foundation for the pedestal / rest post and plastering the same. Installation of pedestal & rest post & boom. Shifting & adjustment of equipments to be carried out as per instructions of site in charge.This include termination of existing/additional/new cable in the relay room/loc box of the gate lodge for the gate panel to be carried out as per given circuit. MISCELLANEOUS WORK - EXECUTION This includes Supply of MAINTENANCE FREE EARTHING AND BONDING SYSTEM (Two Earth Pit) as RDSO per RDSO specification no: RDSO/SPN/197/2008 consisting of (a) Earth electrodes made of high tensile low carbon steel circular rods, molecular bonded with copper on outer surface as per RDSO spn - 2 no. (b) RDSO approved Earth Enhancing compound (c) (MEEB) Main equipotential earth busbar of Copper of 300x25x6 mm(Min) and (SEEB) Sub equipotential earth busbar of copper 150x25x6 mm(Min) (d) Multistrand single core PVC insulated copper cable as per IS:694 -(i) of size 10 sqmm to connect individual equipment to SEEB using copper lugs with stainless steel nuts and bolts,(ii)of size 16 sqmm to connect SEEB to MEEB using copper lugs with stainless steel nut and bolts (iii) of size 16sqmm to connect Surge protection devices(SPD) to MEEB using copper lugs with stainless steel nut and bolts (iv) of size 35 sqmm(duplicated) to connect MEEB to main earth electrode (e) Copper tape of size 25x2mm to connect the two earth pits, (f) Earthpits x 150 mm to terminate on earth electrode.
39853
39901 a
Construction of earthpit and making of earth as per RDSO specification Engineer no.RDSO/SPN/197/2008 and drawing no: SDO/RDSO/E&B/001, Equipotential Earth bus bar and its connection to equipments and surge protection devices in the equipment room as RDSO Drg. no. SDO/RDSO/E&B/002. Provision of Exothermic weld connections, fixtures for mounting the Copper tape in the relay room, weld materials, tools & fixtures for the weld shall be arranged by the contractor. Shifting of existing protection,diagnostic equipments like ELD, Fire alarm system, Fire Engineer extinguisher and other indoor equipmentsetc. complete with its associated units by releasing from existing location with its associated units, transportation, reinstallation, wiring, testing and commissioning at new location. This includes Supply of Block Section Limit Board (BSLB)/ Shunting Limit Board(SLB) - rectangular Engineer board of size 600mm x 1000 mm, height from the rail level to the underside of the board containing the cross 2 meter. The post shall be painted black and white alternatively by 300mm vide strips. The board shall be painted by yellow reflecting paint with black cross lines. This will be as per annexure 6 para 12.134 sheet 4 of signal engineering manual. Installation of various boards like BSLB/GWB/STOP boards as per standard practice at Engineer site. The necessary material like cement, concrete and sand etc for the installation of these boards shall be supplied by contractor. The cement, concrete and sand for these boards shall be in proportion of 1:2:4 of size 30x30x30 cms and finished with cement plaster 1:2 above ground level. This shall be got done under supervision of site engineer.
39902
39921 a
39922
Supply of earth electrodes assembly to RVNL drg. The length of Earth Electrode shall be RITES 2950 mm. Installation of Earth electrode & connecting to location box, signal unit, block ITEMS instruments, lever frames, power equipments, cables, telecom equipments etc. through GI wire 8 SWG suitably connected on MS flats size 40 x 5 mm with complete contractor's material (excluding earth electrode) as per drg. issued by Railway. This includes digging of pit in earth 3 M deep, casting of cement concrete enclosure. Soil treatment as per standard practice involving supply & pouring of salt & charcoal, connecting the equipment through earth lead wire & soldering and supply of cement. wiring material & soldering material. Supply and Fixing of RE Protective Screens of expanded metal 12 SWG of size 1200 Engineer SWG of size 1200 x 1500 mm on signals as per extant practice & connection to earth and as per instruction of Rly engineer at site. Provision of temporary Goomtis for NI working, made up of water proof tent with provision Engineer of one table, one chair, and two incandescent lamps (Electrical connection for lamps to be arranged seperately) and establishing communication on magneto phone and spare conductors. Provision of Public Address system complete with Microphones, speaker etc in the cabin/station/yard during Non Interlock working on hire basis. PAINTING WORK - EXECUTION This include Painting two coats of synthetic enamel paint over one coat of Red Oxide primer after Engineer scrapping and cleaning of the surface wherever necessary with contractor own supply of primer and paints over all INDOOR & OUTDOOR GEARS of Station like EI, Relays, Relay rack, CT rack etc.in Relay room & SM room, lifting barrier, axle counter, ground frame, point machine, location boxes, signal post, unit, track circuits etc. Lettering / Numbering Termination particulars, equipment names etc. legibly and neatly Engineer inside and outside surfaces with contractor own supply of paints over all INDOOR & OUTDOOR GEARS like EI, Relays, Relay rack, CT rack etc.in Relay room & SM room. The work shall be done as per extant practice & the instructions of Rly engineer at site. (Paints to be used shall conform to relevant IS spec.) This include
FOR
SUPPLY
39923
39924
39951 a
39952
Painting two coats of synthetic enamel paint over one coat of Red Oxide primer after Engineer scrapping and cleaning of the surface wherever necessary with contractor own supply of primer and paints over all INDOOR & OUTDOOR GEARS of IBH/Midsection Interlocked LC gate/ Auto Huts like EI, Relays, Relay rack, CT rack, Lifting barrier, ground frame, location boxes, signal, track circuits etc. Lettering / Numbering Termination particulars, equipment names etc. legibly and neatly Engineer inside and outside surfaces with contractor own supply of paints over all INDOOR & OUTDOOR GEARS of IBH/Midsection Interlocked LC gate/ Auto Huts like EI, Relays, Relay rack, CT rack, Lifting barrier, ground frame, location boxes, signal, track circuits etc.The work shall be done as per extant practice & the instructions of Rly engineer at site. (Paints to be used shall conform to relevant IS spec.) RELEASING & TRANSPORTATION WORK - EXECUTION This include: Dismantling and Release of complete INDOOR equipment from stations/IBH/LCgates and Engineer transportation of released material after commissioning from the station/IBH/LC to the S&T store depot or to other site for reusing with contractors own transport as per direction of site Engineer. Most of the indoor released material like - Relays, relay racks, Base plates, CT rack, Terminals, IPS, Tagblock, Datalogger, ELD, Block Instruments, Filter unit, Key lock box with relays etc are proposed to be reuse at the same station or at other stations, thus releasing to be done carefully with out damaging the equipments. The quantity of released material shall be jointly recorded by the contractor and Engineer's/railway representative before releasing from site. Dismantling and Release of complete OUTDOOR equipment from stations/IBH/LCgates Engineer and transportation of released material after commissioning from the station/IBH/LC to the S&T store depot or to other site for reusing with contractors own transport as per direction of site Engineer.Most of the released material like - Signal, Point machine with ground connection, Track relays, and track equipments, axle counter, EC socket and post, gate telephone etc are proposed to be reused at the same station or at other stations, thus releasing to be done carefully with out damaging the equipments. The quantity of released material shall be jointly recorded by the contractor and Engineer's/railway representative before realesing from site.
39961 a
39962
39963
Shifting/ lifting of existing location boxes/ signals/Track lead boxes, junction boxes etc Engineer along with foundation to adjacent place to facilitate earth work/ clearing infringement etc at stations including IBH, LC gates etc. Loading, unloading and transportation of additional/balance Signal and telecom materials Engineer after completion of work or during execution of work, to and from Railway/RVNL other stores depot to and from the site of work. Note: This does not include transporatation of material from nominated depo to site and back or from site to site, which is to be done by contractor free of cost.
ANNEXURE LIST OF ITEMS REQUIRED IN TOOL KIT DESCRIPTION MAKE SIZE ( Taparia /Jhalani ) 200 mm. Non-insulated flat plier. Insulated flat plier. 125 mm. Insulated side cutting plier. -do6 inch. Combination plier. 200 mm Insulated striping plier. 150 mm Insulated nuse plier. 150 mm Monkey plier. 10 inch. Screw Driver ( Insulated ). -do150 x 3 mm Screw Driverd ( Insulated ). -do150 x 4 mm Screw Driver ( Insulated ). -do150 x 5 mm. Screw Driver ( Insulated ). -do150 x 6 mm Screw Driver ( Insulated ). -do150 x 8 mm Screw Driver (Insulated ). -do250 x 8 mm Screw Driver ( Insulated ). -do250 x 10 mm Flat coarse file with handle. 150 mm Round fine file with handle. 150 mm Hammer with handle. 500 Cms. Brass Brush. Spanner double ended. ( Taparia Jhalani ) 6 x 7 mm Spanner double ended. -do8 x 9 mm Spanner double ended. -do10 x 11 mm Spanner double ended. -do12 x 13 mm Spanner double ended. -do14 x 15 mm Spanner double ended. -do16 x 17 mm Spanner double ended. -do18 x 19 mm Spanner double ended. -do20 x 22 mm Spanner double ended. -do21 x 23 mm Spanner double ended. -do24 x 26 mm Spanner double ended. -do25 x 28 mm -do27 x 32 mm Spanner double ended. Spanner double ended. -do30 x 32 mm Hack saw frame. 6 inch. Hack saw frame. 12 inch. Hack saw blade. ( Miranda Make ) 12 x 1/2 inch. Hack saw blade. 6 x 1/4 inch. Steel measuring tape. ( Frumen Make ) 3 Mt. Adjustable screw wrench. -do6 inch. Adjustable screw wrench. -do12 inch. Adjustable screw wrench. -do15 inch Bench vice, size. Level bottle. Soldering Iron 230V, 100W. ( Keertone Make ) Soldering Iron 230V, 65 W. -doSoldering Iron 230V, 25W. Box spanner. 5m. Box spanner. 6mm Box spanner. 7mm Box spanner. 8 mm Box spanner. 9 mm Box spanner. 10 mm Box spanner for OBA Terminals
S.No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
QTY 1 1 6 2 3 3 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 6 6 2 2 2 2 2 2 1 4 2 2 2 2 2 2 2 4
52 53 54 55 56 57 58 59 Note
with plastic handle Tap set. Tap set. Handle for tap. Multimeter 3 and half digit Megger 500 V. DC Tool box of GI sheet 185 WC with Navtal Lock. Crimping Tool . Digital Tong meter.
3 mm 4 mm Fluke 76 or latest MOTWANE MAKE
3D make (CAT No. 3D-3) OR EQUIVALENT MECHO MAKE 2727 OR EQUIVALENT
1 1 1 4 2 1 1 1 2
If any make as mentioned above is not available in the market then the
ANNEXURE
LIST OF SCAFFOLDING MATERIALS REQUIRED FOR 1 RELAY RACK OF SIEMENS TYPE
SR.NO DESCRIPTION
1 2 3 4 5 6 7 8 9 Relay rack with all fixtures and spacers. IDF piller with fixtures. Top frame angle for 2 relay rack. Bottom frame angle for 2 relay rack. IDF Bottom angle for 4 pillers. IDF Top angle for 4 pillers. Vertical support angle RH Vertical support angle LH Triangle Base assembly with 'J' Bolts, nuts, flat and spring washers. 10 Insulaters with fixing studs, spring and flat wahsers (one stud each for one insulater).Stud size11 Cable suopport assembly i.e. 'L' Bracket with 4 Nos. of bolts with nut, spring and plain washers for each 'L' Bracket. 12 16-way fuse holders (1.6 A/0.6A) mounting stripes with studs, spring and plain washers. 13 8-way fuse holders (6A) mounting stripes with stud, spring and plain washers. 14 Bracket for mounting 16-way/8-way fuse stripes with nuts, bolts and washers, i.e. (top brackets) All angles & stripes shall be 6mm and 5mm thick respectively.
SIZE
UNIT
Nos. Nos. Nos Nos Nos. Nos Nos Nos Nos
QTY
1 1 1 1 2 2 1 1 2
65x65x1105mm 65x65x1105mm 65x65x1105mm 65x65x1105mm
12x25mm & 12x20mm. 8 x 25 mm, 6x50 mm.
Nos
Nos
Nos
Nos
Sets.
15 Bracket for mounting 16-way fuse stripes (i.e. bottom bracket). 16 Cable supporting stripes 5x20x210mm 17 Cable supporting stripes 5x20x150mm 18 String rod with PVC insulation (sleeve) fixing bracket and stud with spring and plain wshers. 19 11-way Bus bar with 16 sq.mm. Lugs with PVC covers & fixing arangement (Bracket for fixing Bus bar cover) nut & bolts. 20 Square bar for fixing 8 Nos. of mini group base plate. 21 PVC sleeve (Tube) for insulting wire run 16mm support on IDF pillars and at other places. Angle of various sizes for frame wall support and cable run support (interspacing between racks) (All angles of 6 mm thick). 22 a) Angle b) Angle c) Angle 65x65x2000mm 40x40x2000mm 40x40x1325mm
Sets. Nos Nos Nos
2 10 4 10
Nos
Nos Mtrs.
16 15
Nos. Nos. Nos.
1 1 1
23
24 25 26 27 28
d) Angle e) Angle Angle pieces for fixing wall support angles with 'J' bolts, Nuts, springs and plain washers having 13mm holes and 8mm holes. a) Angle piece with 23mm holes at both 65 mm side b) Angle piece with one hole 13mm and other 9mm on 40mm side. Cable support 'U' bracket C' Bracket for cable run support (5mm thick) 20mm width MS flat to be used. C' Bracket for cable run support 5mm thick MS flat to be used. Signal resistance mounting assembly complete with fixtures and fasteners. Guide rails with fixtures and fasteners for :
40x40x1000mm 65x65x1000mm
Nos. Nos.
2 1
65x65x65 40x40x35 540x100 mm 200x200mm 200 x 150 mm x 20mm width.
Nos. Nos. Nos. Nos. Nos. Sets.
1 2 3 6 6 1
a) Point groujp (RRI) b) Point chain group c) Route group d) Main signal group e) Shunt signal group 29 MS Flat strip for mountiong AG timers
Nos. Nos. Nos. Nos. Nos. Sets.
1 1 1 1 1 1
30 Resistance and condenser mounting Lot 1 assembly Qty. and size as per circuit requirements. 31 Anodized nuts and bolts with plain and spring washers. a) 'J' Bolts for fixing square bars. Nos. 10 b) Studs for fixing relay base plate. 4x20mm Nos. 100 c) Bolts with nuts. 6x20mm Nos. 15 d) Bolts with nuts. 6x25mm Nos. 100 e) Bolts with nuts. 6x40mm Nos. 10 f) Bolts with nuts. 6x50mm Nos. 10 g) Bolts with nuts. 6x75mm Nos. 5 h) Bolts with nuts. 8x25mm Nos. 5 I) Bolts with nuts. 12x25mm Nos. 5 Nos. 1 32 Rack joining pieces. 33 Ladder for cable run support and power wiring with ladder joining pieces and bolts with nuts and washers. a) 400x1500mm. 40x40x6mm Nos. 1 b) 200x1500mm. 25x25x5mm Nos. 2 c) 150x1500mm. 25x25x3mm Nos. 2 34 Blue colour PVC sleeve. 2.5mm Mtrs. 20 35 Relay rack designation board, L shape Nos. 2 complete with fixing clamps. Note M.S. angle and straps should be of MALHOTRA or TISCO OR Note Above list is indicative, and suitable for Siemens type relays based installations, any other material Note fy
TYPICAL FUNCTION TABLE OF EI

Sr. No. Description of signaling Equivale Equivale Gears nt nt Function. Function. IINPUT Output EQUIVAL ENT FUNCTIO N APPROX FUNCTIO APPROX FUNCTIO APPROX FUNCTIO APPROX FUNCTIO N VALUE NO OF NO OF N VALUE N VALUE NO OF N VALUE NO OF GEARS GEARS GEARS GEARS IN FIVE IN FIVE IN 3 LINE IN FOUR LINE LINE STN STN IN LINE STN STATION IN THIRD SINGLE IN IN LINE LINE DOUBLE DOUBLE SECTION LINE LINE 6 18 5 15 7 21 8 24 6 30 4 20 8 40 12 60 0 0 2 14 1 7 4 28 0 0 4 8 4 8 2 8 0 0 2 4 4 8 2 4 2 8 0 0 4 8 6 6 1 1 4 6 0 12 12 5 1 2 12 12 20 6 16 24 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Signal Two aspect Signal Three aspect Signal Four Aspect Junction route indicator One way Junction route indicator Two way Junction route indicator Three way Junction route indicator Four way Calling on Signal Shunt Signal (Dependent) Shunt Signal (Independent) Track Circuit Cross over Point (Signal ended/Double ended) L.C.Gate - Traffic G.F.Operated Point Block Instrument Axle Counter (One track section) Crank Handle Slot Outgoing Slot Incoming
2 3 4 1 2 3 4 1 2 2 1 2 2 2 1 1 1 1 1
1 2 3 1 2 3 4 1 1 1 0 2 2 2 1
3 5 7 2 4 6 8 2 2 3 1 4 4 4 2 1 2 1 1
25 5 1 1 2 2 4 2 2
25 20 4 4 4 2 8 2 2
32 7 1 1 2 2 7 2 2
32 28 4 4 4 2 14 2 2
40 10 1 2 3 3 10 2 2
40 40 4 8 6 3 20 2 2
55 14 1 2 4 4 14 4 4
55 56 4 8 8 4 28 4 4
1 1 1

Bill of Quantities Pkg-2

Uploaded by

Copyright:

Available Formats

Bill of Quantities Pkg-2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bill of Quantities Pkg-2

Uploaded by

Copyright:

Available Formats

Package-2: Arand-Lakhna Summary Sheet of Bill of Quantities Part-I & Part-II

Total Cost as per quoted amount (In words)

Total Cost as quoted amount (In figures)

Package-2 : Arand - Lakhna Summary Sheet of Bill of quantities , Part-I

Total cost in Rs.

Package:2 Arand - Lakhna

Package-2 : Arand - Lakhna Bill of quantities , Part-I

1002 a 1002 b 1002 c 1002 d 1003 1004

Package-2 : Arand - Lakhna Bill of quantities , Part-I

2012 2013 2014

6422 17236 4938 4950

Cum Cum Cum Sqm

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Package-2 : Arand - Lakhna Bill of quantities , Part-I

4003 a 4003 b NS-1

Package-2 : Arand - Lakhna Bill of quantities , Part-I

526275 7270 402225 4

Each Each Each Set

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Package-2 : Arand - Lakhna Bill of quantities , Part-I

5041 a 60 KG rail 5041 b 52 KG rail

Package-2 : Arand - Lakhna Bill of quantities , Part-I

TOTAL FOR BILL No.6 (Carried forward to Summary of Part-I)

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Package-2 : Arand - Lakhna Bill of quantities , Part-I

Per Track Circuit

Package:2 Arand - Lakhna

Amount in Rs. 10,931,025

1,512,327 2,005,790 20,754,029

Package:2 Arand - Lakhna

15908 2326 717 1474800 90

Cum Cum Cum CUCM M

97.21 171.98 337.43 0.65 11029.46

1546417 400025 241937 958620 992651

104499 89264 3600486

2020a 2020b 2025 2026

Each Each Meter Each

123193.46 92441.83 186.01 6.54

369580 277325 428009 19620 9061272

Package:2 Arand - Lakhna

Package:2 Arand - Lakhna

114400 20035 249603

Each Set Each

7.22 23.45 19.85

825,968 469,821 4,954,620

2,550,329 2,004,069 334,060 949,370 1,466,491 788,435 2,006,130 881,171 17,230,464

Package:2 Arand - Lakhna

58 9 14816 1116 806

Set Set Each Each Each

1,517,332 166,437 427,738 1,343,999 611,488 -

18493.05 28.87 1204.30 758.67

908,777 110,940 673,904 37,239 927,505 9,329,858

Package:2 Arand - Lakhna

5003 5003 a 5003 b 5004 5005 5005 a 5005 b 5007

1496 1638 4828

Each Each Each

57.55 38.37 29.74