Scribd
Upload
461 views

Mathcad - Beam Programming

The document discusses the bending moment (M) and shear force (V) in a beam over a 4 meter length. It provides the mathematical equations for M(x) and V(x) over subsections of the beam from 0 to 4 meters. Graphs are also shown of the bending moment and shear force versus the position along the beam length. The key values of the bending moment and shear force at 1, 2, 3, and 4 meters are listed.

Uploaded by

Desejo Sozinando
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
461 views

Mathcad - Beam Programming

The document discusses the bending moment (M) and shear force (V) in a beam over a 4 meter length. It provides the mathematical equations for M(x) and V(x) over subsections of the beam from 0 to 4 meters. Graphs are also shown of the bending moment and shear force versus the position along the beam length. The key values of the bending moment and shear force at 1, 2, 3, and 4 meters are listed.

Uploaded by

Desejo Sozinando
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Computer Programming Skills

kNm := J 10

Solution by DF Sozinando Student at the


Vaal University of Technology

MathCad

FORM STRENGTH OF MATERIAL TEXT BOOK Pag 101

M ( x) := 0
-15kN x if 0m < x 1m
[ -15kN x + 57.5kN ( x - 1m) ] if 1m x 2m
[ -15kN x + 57.5kN ( x - 1m) - 80kN ( x - 2m) ] if 2m x 3m
[ -15kN x + 57.5kN ( x - 1m) - 80kN ( x - 2m) + 47.5kN ( x - 3m) ] if 3m < x 4m
M ( 1m) = -15 kNm
M ( 2m) = 27.5 kNm
M ( 3m) = -10 kNm
M ( 4m) = 0 kNm
V ( x) := 0
-15kN if 0m < x 1m

V ( 1m) = 42.5 kN

( -15kN + 57.5kN) if 1m x 2m

V ( 2m) = -37.5 kN

( -15kN + 57.5kN - 80kN) if 2m x 3m

V ( 3m) = -37.5 kN

( -15kN + 57.5kN - 80kN + 47.5kN) if 3m < x < 4m

V ( 4m) = 0 kN

60
40
V( x) 20
kN

0
- 20
- 40

30
20
M( x) 10
kNm

0
- 10
- 20

2
x

You might also like