How to Write Your Own JSF Components

Introduction......................................................................................................................................2 Building Instructions for This Tutorial ............................................................................................3 Ant Folder ....................................................................................................................................3 ExtLib Folder...............................................................................................................................4 JavaSource Folder........................................................................................................................4 WebContent Folder......................................................................................................................4 Root Folder ..................................................................................................................................4 General Tips for Building Components...........................................................................................5 Step 1: Components Skeleton ..........................................................................................................6 Step 2: Adding Simple Attributes ..................................................................................................11 Step 3: Adding JSF Support Attributes..........................................................................................16 Step 4: Attribute Binding ...............................................................................................................18 Step 5: Component Binding...........................................................................................................21 Step 6: Final Version .....................................................................................................................24 Step 7: Creating a Deployable Jar File ..........................................................................................29 What Next? ....................................................................................................................................32 Additional Topics ......................................................................................................................32 JSF Resources ............................................................................................................................32

Exadel, Inc. Professional Tools for Open Source 1855 Gateway Blvd., Suite 770 Concord, CA 94520 [email protected] www.exadel.com 925-363-9510

How to Write Your Own JSF Components

Introduction

Introduction
JavaServerTM Faces is a technology that helps to build a user interface based on the components approach. Using UI Components as building blocks simplifies the development, slashes the number of code lines, and allows reusing the same components from one project to the next. What are the components we are speaking about? The Sun reference implementation of JSF provides just a few very common components for Web forms, primitive tags for page layout, and dataTable as a way to show the data set. The open source implementations of JSF dont provide much more. The commercial implementation of GUI Tools for JSF such as WebSphere Application Developer and Java Studio Creator do come with significant additions to the set of components that allows creating interfaces similar to that of Swing applications. However, traditionally, the Web interface lacks all of the richness of thick-client analogs. A customer might have an existing design that is not covered by the set of standard controls. Third-party components vendors will try to create the most common components with a multitude of custom parameters, but still these do not match the requirements for an individual Web application. The JSF Specification in Section 1.2.2 mentions the Component Writer role along with Page Writer and Application Developer roles. Writing a specific component set for a particular Web application might be a good solution instead of trying to use existing ones that a customer might not even accept. Is it easy to write your own JSF UI component? Suns J2EE tutorial provides a section dedicated to this topic. This paragraph describes an example with Map components giving an overview of almost all the features you might need in developing your own components. However, the example itself seems too complicated to use it as a beginning kick start type of application. It gives a good overview of the technology, but does not give enough details for the specific steps you would need to go through to write your own components. This tutorial is dedicated to closing this gap. It is written in a step-by-step manner where each step is extremely easy to understand. The provided example does not cover all the aspects of components development, but it is a very good start to understand the idea. Topics not covered in this tutorial are set forth in the last section.

page 2 of 32

How to Write Your Own JSF Components

Building Instructions for This Tutorial

Building Instructions for This Tutorial

The tutorial consists of seven separate steps for building up an example application. Each step adds new code to the previous example. The tutorial includes code representing the result of each step. If you are lost, you can compare these target results with your results. Also, you might want to add some extra feature to the code to test how it works. If this messes things up, you can just replace your code with the included code to go on to the next step. The tutorial material is divided into seven folders with the names Step1, Step2, Step3, Step4, Step5, Step6, and Step7. Each folder contains only one subfolder named ticker. This subfolder contains a working example that represents the result up to that particular step. Additionally, a folder named Step0 contains the skeleton for starting the JSF project. For this tutorial, you can use any tools that allow you to work directly with source code. We recommend you to use Exadel JSF Studio. JSF Studio allows the running of JSF applications without redeployment. This is extremely important when you play with the code by adding new features to test how they work. At the same time, JSF Studio allows you to have full control over the source code. We even recommend turning on the Use Source Tab as a default for multi-tab editors option in the Preferences Editor (Exadel->Editors section). You can always use the GUI feature of JSF Studio later to slash the development time when you start to understand enough how things works on the source code level. The provided example is fully adapted to work with Exadel JSF Studio. Exadel JSF Studio allows debugging Web applications in the same manner in which you can debug a regular Java application within the Eclipse environment. This is an extremely important feature for learning. To start working with the tutorial example, copy the ticker folder to a new place on the disk. If you use JSF Studio, copy this folder to the Eclipse workspace folder (or wherever you usually keep projects) and then import this project using the Eclipse File->Import menu. Leave the server.xml registration option checked on the second screen of wizard. This allows you to change and then run an application without any special redeployment. Each ticker folder contains four subfolders: ant ExtLib JavaSource WebContent

Ant Folder
The ant folder contains the build.xml file that can be used to compile the example and deploy it to a target servlet container to run. In order to use this script be sure that ant is in your system path. The default Ant target is deploy, so if you launch Ant without parameters, it create an additional folder named deploy and puts the deployable war file into it. If you want, you can provide another folder as the target for deployment. Open the build.xml file for editing and set the deploy-dir Ant property to the different target folder.

page 3 of 32

How to Write Your Own JSF Components

Building Instructions for This Tutorial

ExtLib Folder
The ExtLib folder just contains the servlet.jar file that is required to be in the classpath to have the code compiled. This jar file is added to the classpath only when you use the Ant script. (This file is not used by JSF Studio). If you want, you can any replace it with you own library that contains required classes for compilation. Replace the property with name servlet.path for this purpose.

JavaSource Folder
The JavaSource folder contains the java source files and resource bundle files.

WebContent Folder
The WebContent folder contains the pre-deployment structure for a standard J2EE application.

Root Folder
Additionally, the root folder contains four files start with dot. Those files contain the configuration for JSF Studio only.

page 4 of 32

How to Write Your Own JSF Components

General Tips for Building Components

General Tips for Building Components

Simulate a rendered result before implement it. Use any HTML editor with a preview option to see how the HTML you are going to produce works buy itself. If some HTML construction doesnt work for you, you save time seeing the problem before you start to implement the component that produces the unsatisfactory HTML code. Localize the JavaScript functions. If the rendered code contains JavaScript, be sure this JavaScript code doesnt collide with JavaScript coding in other components that will work on the same page. Test how your component works together with other JSF Components. Check the situation where your components insert other components or are themselves inserted as children for other components. Check how the rendered code works in the different browser. Avoid browser-specific tags or attributes.

page 5 of 32

How to Write Your Own JSF Components

Step 1: Components Skeleton

Step 1: Components Skeleton

Before we start, lets see what we have at the beginning. The initial project taken from the Step0 folder contains a short example that does nothing except open the bannerpage.jsp page when the application starts. This JSP page will be used as a testing area for testing the rendered component output. After the final step we have got a scrollable area with the text inside. It will look like the following picture:

In the first step we create a component that will be rendered into the following code in the resulting HTML page:
<div>Hello JSF Component</div>

On the original JSF page we will have:

<d:ticker> <f:verbatim>Hello JSF Component</f:verbatim> </d:ticker>

Lets start with creating the tag library definition file. Open the WEB-INF folder and create a ticker.tld file that contains the following code:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd"> <taglib> <tlib-version>1.0</tlib-version> <jsp-version>1.2</jsp-version> <short-name>d</short-name> <uri>http://jsftutorials.com/</uri> <tag> <name>ticker</name> <tag-class>ticker.TickerTag</tag-class> <body-content>JSP</body-content> </tag> </taglib>

We have declared the new tag with the name ticker and defined ticker.TickerTag as a tag class. Open JavaSource folder; create a package ticker there and the class TickerTag there that contains the following code: page 6 of 32

How to Write Your Own JSF Components

package ticker; import javax.faces.component.UIComponent; import javax.faces.webapp.UIComponentTag; public class TickerTag extends UIComponentTag{ public void release() { // the super class method should be called super.release(); } protected void setProperties(UIComponent component) { // the super class method should be called super.setProperties(component); } public String getComponentType() { return "ticker"; } public String getRendererType() { // null means the component renders itself return null; } }

Step 1: Components Skeleton

The class TickerTag processes the tag attribute. Such a class name has the suffix Tag by a naming convention. The TickerTag class extends UIConponentTag and implements four methods. The getComponentType() method returns the symbolic name of the component type. We will define the class for this type latter in the faces-config file. The getRendererType() method returns the symbolic name of the renderer. If getRendererType() returns null, it means that the renderer name is not defined and the component will render it by itself. The release() method releases any resources allocated during the execution of this tag handler. We will use this method to reset the attribute values. The release() method should call the release() method of the super class. And the last (but not least) method, setProperties(UIComponent component), is used to pass attributes taken from the JSP page to the renderer. You can use the JSF Expression Language in the value for the tag attribute. This is also resolved by the setProperties method. We will return back to this theme in step 4 of this tutorial. Now lets define the component class for the component type declared above. Open WEBINF/faces-config.xml and put the declaration there. The faces-config.xml should contain the following code:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN" "http://java.sun.com/dtd/web-facesconfig_1_0.dtd"> <faces-config> <component> <component-type>ticker</component-type> <component-class>ticker.UITicker</component-class> </component> <lifecycle/>

page 7 of 32

How to Write Your Own JSF Components

<application> <locale-config/> </application> <factory/> </faces-config>

Step 1: Components Skeleton

We have defined the ticker.UITicker class as a component class for the ticker type. By a naming convention, such a class starts with the UI prefix. The component class provides a rendering user interface, state saving and restoring, and processing of user input. Create the tickerUITicker class with the following content:
package ticker; import java.io.IOException; import javax.faces.component.UIOutput; import javax.faces.context.FacesContext; import javax.faces.context.ResponseWriter; public class UITicker extends UIOutput { public void encodeBegin(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.startElement("div", this); } public void encodeEnd(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.endElement("div"); } }

Because our custom component does not provide for any user input, we extend the class from the UIOutput. The UITicker class implements two methods encodeBegin(FacesContext context) and encodeEnd(FacesContext context). The first method encodes the opening tag; the second one encodes the closing tag. However, if your tags do not contain a body, it is recommended to encode everything using only the encodeEnd(FacesContext context) method. Now lets create the page where our custom tag will be used. Open the bannerpage.jsp page located inside the WebContent folder and add a taglib declaration and our tag with test output. The page should look like:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %> <%@ taglib uri="http://jsftutorials.com/" prefix="d" %> <html> <head> <title>Show Custom Component</title> </head> <body> <f:view> <d:ticker> <f:verbatim>Hello JSF Component</f:verbatim> </d:ticker> </f:view> </body> </html>

page 8 of 32

How to Write Your Own JSF Components

Step 1: Components Skeleton

There are two things important to mention here. The first thing concerns the URI attribute. Many people think that this attribute must be a reference to an existing URL, but this is not quite true. A URI is not the same as a URL. The target of this attribute is defining the unique string that will distinguish this particular taglib from the others. The second important thing is using <f:verbatim> </f:verbatim> around the plain text. When the JSF Components tree is rendered, it contains only the JSF Components. So, any children in the hierarchy must be JSF components. If you run the first example, there might not be any difference, because <d:ticker> is a root node of the JSF Component hierarchy. However, in case you add <h:gridPanel>, for example, around it, you will find that the plain text without <f:verbatim> will be pushed out of the <div></div> in the rendered page. At this point, our first step has been finished. We can compile, deploy, and run the result application. If you use Ant to do this job, run Ant so that the ticker.war file is copied to the servlet container to run. If youre using JSF Studio, click the Start Tomcat Server button on the toolbar, and then click the Run Web Application button. The default browser should be launched and show the result of page rendering.

You can see the Hello JSF Component text in the browser window. Because <div> itself does not provide any visual effect, you can recognize that the page is rendered as we expected only if you look at the source of the result page. It should contain the <div>Hello JSF Component</div> text. If so, the first step is done. You have already written you first JSF Component. Of course, it has very limited functionality, but we just laid the foundation. The component will be improved in the next step. Before we go any further, lets survey the relationships among the different JSF artifacts we are using here. The following picture shows this relationship:

page 9 of 32

How to Write Your Own JSF Components

Step 1: Components Skeleton

page 10 of 32

How to Write Your Own JSF Components

Step 2: Adding Simple Attributes

Step 2: Adding Simple Attributes

This step is devoted to adding attributes to our custom tag. As we mentioned for the first step, tag <div> does not provide any visible effect. So, in the second step, we will add attributes that make more visible results. Commonly, visual JSF tags define the tag style directly with style and styleClass attributes or indirectly by using the Cascading Style Sheet file. Lets start with the style attribute. Add it to the JSP page. The JSP page will look like this:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %> <%@ taglib uri="http://jsftutorials.com/" prefix="d" %> <html> <head> <title>Show Custom Component</title> </head> <body> <f:view> <d:ticker style="border:1px solid darkblue;width:100px"> <f:verbatim>Hello JSF Component</f:verbatim> </d:ticker> </f:view> </body> </html>

Add the tag attribute to the ticker.tld file:

<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd"> <taglib> <tlib-version>1.0</tlib-version> <jsp-version>1.2</jsp-version> <short-name>d</short-name> <uri>http://jsftutorials.com/</uri> <tag> <name>ticker</name> <tag-class>ticker.TickerTag</tag-class> <body-content>JSP</body-content> <attribute> <name>style</name> </attribute> </tag> </taglib>

Add the following code marked with bold to the TickerTag class:
package ticker; import javax.faces.component.UIComponent; import javax.faces.webapp.UIComponentTag; public class TickerTag extends UIComponentTag{ String style; public String getStyle() { return style; } public void setStyle(String style) { this.style = style; }

page 11 of 32

How to Write Your Own JSF Components

public void release() { // the super class method should be called super.release(); style = null ; } protected void setProperties(UIComponent component) { // the super class method should be called super.setProperties(component);

Step 2: Adding Simple Attributes

if(style != null) component.getAttributes().put("style", style); } public String getComponentType() { return "ticker"; } public String getRendererType() { // null means the component renders itself return null; } }

First, we have added a new property with the name style and provided the getter and setter for it. Then, we reset the property in the release() method. Finally, we have set the new value for the component property in the setProperties(UIComponent component) method. The last step is important. If you forget to do so, you cannot get to the value in the component type class later on. Add the code marked with bold to the ticker.UITicker class:
package ticker; import java.io.IOException; import javax.faces.component.UIOutput; import javax.faces.context.FacesContext; import javax.faces.context.ResponseWriter; public class UITicker extends UIOutput { public void encodeBegin(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.startElement("div", this); String style = (String)getAttributes().get("style"); if (style!=null) writer.writeAttribute("style", style, null); } public void encodeEnd(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.endElement("div"); } }

In the first added line, we have taken the value of the style attribute, checked if its set, and then assigned the style attribute with the new value. Do not forget to check for null, otherwise you will get a NullPointer Exception when a tag without this attribute set is rendered. page 12 of 32

How to Write Your Own JSF Components

Step 2: Adding Simple Attributes

Now, we are done with the style attribute. If you use JSF Studio just click the Run Web Application button to get a result. If you are using an Ant script, run it, deploy the result war file under the servlet container, then launch your browser and type the application URL. The result page should see the box with dark blue border and the Hello JSF Component text inside this box. Adding the styleClass component is very similar to what we did for style. Here is a bannerpage.jsp content:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %> <%@ taglib uri="http://jsftutorials.com/" prefix="d" %> <html> <head> <title>Show Custom Component</title> <style> .banner { border: 1px solid darkblue; padding: 5px 5px 5px 5px; } </style> </head> <body> <f:view> <d:ticker styleClass="banner" style="width:100px"> <f:verbatim>Hello JSF Component</f:verbatim> </d:ticker> </f:view> </body> </html>

This is the ticker.tld file content:

<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd"> <taglib> <tlib-version>1.0</tlib-version> <jsp-version>1.2</jsp-version> <short-name>d</short-name> <uri>http://jsftutorials.com/</uri> <tag> <name>ticker</name> <tag-class>ticker.TickerTag</tag-class> <body-content>JSP</body-content> <attribute> <name>style</name> </attribute> <attribute> <name>styleClass</name> </attribute> </tag> </taglib>

This is the TickerTag.java class content:

package ticker; import javax.faces.component.UIComponent; import javax.faces.webapp.UIComponentTag; public class TickerTag extends UIComponentTag{ String style;

page 13 of 32

How to Write Your Own JSF Components

String styleClass; public String getStyle() { return style; } public void setStyle(String style) { this.style = style; } public String getStyleClass() { return styleClass; } public void setStyleClass(String styleClass) { this.styleClass = styleClass; } public void release() { // the super class method should be called super.release(); style = null ; styleClass = null ; } protected void setProperties(UIComponent component) { // the super class method should be called super.setProperties(component);

Step 2: Adding Simple Attributes

if(style != null) component.getAttributes().put("style", style); if(styleClass != null) component.getAttributes().put("styleClass", styleClass); } public String getComponentType() { return "ticker"; } public String getRendererType() { // null means the component renders itself return null; } }

This is the UITicker.java file content:

package ticker; import java.io.IOException; import javax.faces.component.UIOutput; import javax.faces.context.FacesContext; import javax.faces.context.ResponseWriter; public class UITicker extends UIOutput { public void encodeBegin(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.startElement("div", this); String style = (String)getAttributes().get("style"); if (style!=null)

page 14 of 32

How to Write Your Own JSF Components

writer.writeAttribute("style", style, null);

Step 2: Adding Simple Attributes

String styleClass = (String)getAttributes().get("styleClass"); if (styleClass!=null) writer.writeAttribute("class", styleClass, null); } public void encodeEnd(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.endElement("div"); } }

Now, step 2 is done. Run the resulting application. The browser window should show the bordered box with the Hello JSF Component text inside. Unlike the previous run, you will see 5 pixels of space between the text and the border.

page 15 of 32

How to Write Your Own JSF Components

Step 3: Adding JSF Support Attributes

Step 3: Adding JSF Support Attributes

Looking at the source code of pages rendered by the JSF run-time you can see that most components have an id. They have this attribute assigned even you dont explicitly define it for the JSF tags. Also, JSF has its own naming convention for the component id. While you might specify something like id=myId for h:inputText, the rendered code will contain something like id=_id0:myId. This is done to ensure the uniqueness of each element in the JSF Component tree. It is especially important for components that process user input. Having the full control over the rendered code you can assign any value for id, but we recommend you to follow the rules of the game. In step 3, we will assign a value for our component that will be the same value that JSF runtime assigns for it. Any attribute should be present in the tag library definition file. So, open our ticker.tld file and add the following code snippet next to the other tag attributes:
<attribute> <name>id</name> </attribute>

Add the following code marked with bold in the encodeBegin method of the UITicker.java:
public void encodeBegin(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.startElement("div", this); writer.writeAttribute("id", getClientId(context), null); String style = (String)getAttributes().get("style"); if (style!=null) writer.writeAttribute("style", style, null); String styleClass = (String)getAttributes().get("styleClass"); if (styleClass!=null) writer.writeAttribute("class", styleClass, null); }

When you run the application at this point, you can see that the id attribute of the <div> tag is assigned. Because the id attribute has no visual effect, you have to open the source of the resulting page to see it. Provide your id for the <d:ticker> component and run the application again. Then, you will see that the id you have for the rendered code is the same that you assign. This happens because the <d:ticker> is a root element of the component tree. If you add <h:form> or <h:subview> around it, you can the that the same prefix is added to the value you assigned for id. We are done with id attribute. Now, lets use the rendered attribute. This attribute can be used with any JSF Component, because it is inherited from the UIComponent class, the top level of the JSF Component hierarchy. The rendered attribute itself is not passed through to the

page 16 of 32

How to Write Your Own JSF Components

Step 3: Adding JSF Support Attributes

HTML code as a tag attribute, but, if it has been set to false, the tag with all of its children will not be rendered at all. It is pretty easy to add a rendered attribute. Just add it into the ticker.tld and all is set.
<attribute> <name>rendered</name> </attribute>

Add rendered=false to the <d:ticker> tag, run the application and see what happens. The browser should show the empty page. When you assign the true value, the page will show the box with a greeting again. This is a good time to show why <f:verbatim> is important for this construction. Remove <f:verbatim> around the Hello JSF Component text, write rendered=false and run the application. You can see that the box disappears, but the greeting text is still there. Looking at the resulting code, you can realize that the <div> tag is stripped out.

page 17 of 32

How to Write Your Own JSF Components

Step 4: Attribute Binding

Step 4: Attribute Binding

Attribute binding is one of the most powerful JSF features. You can take the value from a bean property or resource bundle property rather than just hardcode it into your JSP file. In step 4, we add one new attribute with the name title whose value will be taken from the resource bundle instead of defining it directly in the JSP file (thats also possible). In order to separate the designed component and the code that test it, lets create an additional package with the name demo within the JavaSource folder. In the demo package, create the file with the name resources.properties with the following content:
banner_title=Creating JSF Components. Step-By-Step Tutorial.

Add the new attribute with the name title to the ticker.tld file next to the other attribute of the ticker tag.
<attribute> <name>title</name> </attribute>

Add the text marked with bold to the ticker.TickerTag.java file:

package ticker; import javax.faces.component.UIComponent; import javax.faces.el.ValueBinding; import javax.faces.webapp.UIComponentTag; public class TickerTag extends UIComponentTag{ String style; String styleClass; String title; public String getStyle() { return style; } public void setStyle(String style) { this.style = style; } public String getStyleClass() { return styleClass; } public void setStyleClass(String styleClass) { this.styleClass = styleClass; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public void release() {

page 18 of 32

How to Write Your Own JSF Components

// the super class method should be called super.release(); style = null ; styleClass = null ; title = null; } protected void setProperties(UIComponent component) { // the super class method should be called super.setProperties(component); if(style != null) component.getAttributes().put("style", style);

Step 4: Attribute Binding

if(styleClass != null) component.getAttributes().put("styleClass", styleClass); if (title != null) { if (isValueReference(title)) { ValueBinding vb = getFacesContext().getApplication(). createValueBinding(title); component.setValueBinding("title", vb); } else { component.getAttributes().put("title", title); } } } public String getComponentType() { return "ticker"; } public String getRendererType() { // null means the component renders itself return null; } }

The most important part of the added code is inside the SetProperties method. We check there to see if this value is referenced and if so we create the value binding. Otherwise, we just pass the value taken from the JSP page. The other code is similar to what we did previously. Add the code marked with bold to the encodeBegin method of the ticker.UITicker.java file:
public void encodeBegin(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.startElement("div", this); writer.writeAttribute("id", getClientId(context), null); String style = (String)getAttributes().get("style"); if (style!=null) writer.writeAttribute("style", style, null); String styleClass = (String)getAttributes().get("styleClass"); if (styleClass!=null) writer.writeAttribute("class", styleClass, null); String title = (String)getAttributes().get("title"); if (title!=null) writer.writeAttribute("title", title, null); }

page 19 of 32

How to Write Your Own JSF Components

Step 4: Attribute Binding

Add the following code marked with bold to the bannerpage.jsp file:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %> <%@ taglib uri="http://jsftutorials.com/" prefix="d" %> <f:loadBundle basename="demo.resources" var="bundle" /> <html> <head> <title>Show Custom Component</title> <style> .banner { border: 1px solid darkblue; padding: 5px 5px 5px 5px; } </style> </head> <body> <f:view> <d:ticker id="banner" styleClass="banner" style="width:100px" rendered="true" title="#{bundle.banner_title}"> <f:verbatim>Hello JSF Component</f:verbatim> </d:ticker> </f:view> </body> </html>

We have added here the reference to our bundle and taken the banner_title property as a title attribute for the <d:ticker> tag. Now, we are done with step 4 of our tutorial. Run the application and hold the mouse cursor over the box. The tip message should appear. If you look at the source code on the rendered page, you can see the title attribute set to a value taken from the resource bundle property.

page 20 of 32

How to Write Your Own JSF Components

Step 5: Component Binding

Step 5: Component Binding

One more powerful feature of the JSF technology is component binding. Unlike value binding, component binding allows controlling all of the aspects of a bound component and its child hierarchy from a Java class that is usually called a backing bean. In step 5, we will demonstrate how this mechanism works. We will add a form with two buttons to our bannerpage.jsp page. One button will hide the box for our greeting message; the other button will return it back to the page. We will also create a backing bean that will control the form and the component located inside the form. Actually, the binding mechanism is provided by the super class of our component. All we have to do it to add a new attribute with the name binding to the ticker.tld file. All other stuff added on this step has a testing purpose. So, this is our ticker.tld file content:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd"> <taglib> <tlib-version>1.0</tlib-version> <jsp-version>1.2</jsp-version> <short-name>d</short-name> <uri>http://jsftutorials.com/</uri> <tag> <name>ticker</name> <tag-class>ticker.TickerTag</tag-class> <body-content>JSP</body-content> <attribute> <name>style</name> </attribute> <attribute> <name>styleClass</name> </attribute> <attribute> <name>id</name> </attribute> <attribute> <name>rendered</name> </attribute> <attribute> <name>title</name> </attribute> <attribute> <name>binding</name> </attribute> </tag> </taglib>

Add the code marked with bold to the faces-config.xml file:

<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN" "http://java.sun.com/dtd/web-facesconfig_1_0.dtd"> <faces-config> <component> <component-type>ticker</component-type> <component-class>ticker.UITicker</component-class> </component> <managed-bean>

page 21 of 32

How to Write Your Own JSF Components

<managed-bean-name>BannerPageBean</managed-bean-name> <managed-bean-class>demo.BannerPageBean</managed-bean-class> <managed-bean-scope>request</managed-bean-scope> <managed-property> <property-name>rendered</property-name> <property-class>java.lang.Boolean</property-class> <value>true</value> </managed-property> </managed-bean> <lifecycle/> <application> <locale-config/> </application> <factory/> </faces-config>

Step 5: Component Binding

We have added the managed bean with name BannerPageBean that will play the role on backing bean for our form. We also have defined the rendered property that is set to true by default. Create new file with the name BannerPageBean.java inside the demo package. Here is the content of this file:

package demo; import ticker.UITicker; public class BannerPageBean { Boolean rendered; UITicker ticker; public Boolean getRendered() { return rendered; } public void setRendered(Boolean rendered) { this.rendered = rendered; } public UITicker getTicker() { return ticker; } public void setTicker(UITicker ticker) { this.ticker = ticker; } public UITicker getTiker() { return ticker; } public void setTiker(UITicker tiker) { this.ticker = tiker; } public String TurnOn() { ticker.setRendered(true); return null; } public String TurnOff() { ticker.setRendered(false); return null; }

page 22 of 32

How to Write Your Own JSF Components

}

Step 5: Component Binding

The bean has two properties: rendered that has a Boolean type and ticker that has a type of our UITicker class. The two last methods will be called when you click the buttons on the page. Those methods call the setter of the rendered property of the ticker. Actually, you have full control over the ticker component here and can change any attribute you need. The bannerpage.jsp file should contain the following:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %> <%@ taglib uri="http://jsftutorials.com/" prefix="d" %> <f:loadBundle basename="demo.resources" var="bundle" /> <html> <head> <title>Show Custom Component</title> <style> .banner { border: 1px solid darkblue; padding: 5px 5px 5px 5px; } </style> </head> <body> <f:view> <h:form> <h:commandButton value="Turn Off" action="#{BannerPageBean.TurnOff}"/> <h:commandButton value="Turn On" action="#{BannerPageBean.TurnOn}"/> <d:ticker id="banner" styleClass="banner" style="width:100px" title="#{bundle.banner_title}" binding="#{BannerPageBean.ticker}"> <f:verbatim>Hello JSF Component</f:verbatim> </d:ticker>

</h:form> </f:view> </body> </html>

The binding attribute of our component refers to the ticker property of the backing bean. The buttons action attribute calls the corresponding method. We are done with step 5. When you launch your application you can see our fancy box and two buttons above them. Click the Turn Off button and the box disappears, click the Turn On button and the box appears again.

page 23 of 32

How to Write Your Own JSF Components

Step 6: Final Version

Step 6: Final Version

In this step, we set up our component with the look and feel we mentioned in the first step. Additionally, we assign a couple new attributes: width and height. It will be more convenient to define the value directly rather then use the style attribute. If you define width and height in the style and add width and height attributes for the custom tag at the same time, the attributes will overwrite the values defined with the style. Add width and height attribute to the ticker.tld file. Here is the final version of it:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd"> <taglib> <tlib-version>1.0</tlib-version> <jsp-version>1.2</jsp-version> <short-name>d</short-name> <uri>http://jsftutorials.com/</uri> <tag> <name>ticker</name> <tag-class>ticker.TickerTag</tag-class> <body-content>JSP</body-content> <attribute> <name>style</name> </attribute> <attribute> <name>styleClass</name> </attribute> <attribute> <name>id</name> </attribute> <attribute> <name>rendered</name> </attribute> <attribute> <name>title</name> </attribute> <attribute> <name>binding</name> </attribute> <attribute> <name>width</name> </attribute> <attribute> <name>height</name> </attribute> </tag> </taglib>

Add the code marked with bold to the TickerTag.java file:

package ticker; import javax.faces.component.UIComponent; import javax.faces.el.ValueBinding; import javax.faces.webapp.UIComponentTag; public class TickerTag extends UIComponentTag{ String style; String styleClass; String title; String width; String height;

page 24 of 32

How to Write Your Own JSF Components

public String getHeight() { return height; } public void setHeight(String height) { this.height = height; } public String getWidth() { return width; } public void setWidth(String width) { this.width = width; } public String getStyle() { return style; } public void setStyle(String style) { this.style = style; } public String getStyleClass() { return styleClass; } public void setStyleClass(String styleClass) { this.styleClass = styleClass; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public void release() { // the super class method should be called super.release(); style = null ; styleClass = null ; title = null; height = null; width = null; } protected void setProperties(UIComponent component) { // the super class method should be called super.setProperties(component); if(style != null) component.getAttributes().put("style", style);

Step 6: Final Version

if(styleClass != null) component.getAttributes().put("styleClass", styleClass); if(width != null) component.getAttributes().put("width", width); if(height != null) component.getAttributes().put("height", height); if (title != null) { if (isValueReference(title)) { ValueBinding vb =

page 25 of 32

How to Write Your Own JSF Components

getFacesContext().getApplication(). createValueBinding(title); component.setValueBinding("title", vb); } else { component.getAttributes().put("title", title); } } } public String getComponentType() { return "ticker"; } public String getRendererType() { // null means the component renders itself return null; } }

Step 6: Final Version

This is a final version of the UITicker.java file:

package ticker; import java.io.IOException; import javax.faces.component.UIOutput; import javax.faces.context.FacesContext; import javax.faces.context.ResponseWriter; public class UITicker extends UIOutput { public void encodeBegin(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.startElement("div", this); writer.writeAttribute("id", getClientId(context), null); String width = (String)getAttributes().get("width"); String height = (String)getAttributes().get("height"); String style = (String)getAttributes().get("style"); style= (style!=null) ? style + ";" : ""; if (width != null) style += "width:" + width + ";"; if (height != null) style += "height:" + height+ ";"; writer.writeAttribute("style", style, null); String styleClass = (String)getAttributes().get("styleClass"); if (styleClass!=null) writer.writeAttribute("class", styleClass, null); String title = (String)getAttributes().get("title"); if (title!=null) writer.writeAttribute("title", title, null); } public void encodeEnd(FacesContext context) throws IOException { ResponseWriter writer = context.getResponseWriter(); writer.endElement("div"); }

page 26 of 32

How to Write Your Own JSF Components

}

Step 6: Final Version

The HTML <div> tag itself does not have the width and height attributes. So, we use a little trick here. We add the width and height to the tail of the style attribute. If style attribute does not exist we create it. This is a final version of the bannerpage.jsp file:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %> <%@ taglib uri="http://jsftutorials.com/" prefix="d" %> <f:loadBundle basename="demo.resources" var="bundle" /> <html> <head> <title>Show Custom Component</title> <style> .banner { border: 1px solid darkblue; padding: 5px 5px 5px 5px; overflow: auto; } </style> </head> <body> <f:view> <h:form> <h:commandButton value="Turn Off" action="#{BannerPageBean.TurnOff}"/> <h:commandButton value="Turn On" action="#{BannerPageBean.TurnOn}"/> <d:ticker id="banner" width="300px" height="200px" styleClass="banner" title="#{bundle.banner_title}" binding="#{BannerPageBean.ticker}">

<h:panelGrid columns="1"> <h:outputText value="Introduction"/> <h:outputText value="Building Instructions for This Tutorial"/> <h:outputText value="General Tips for Building Components"/> <h:outputText value="Step 1: Components Skeleton"/> <h:outputText value="Step 2: Adding Simple Attributes"/> <h:outputText value="Step 3: Adding JSF Support Attributes"/> <h:outputText value="Step 4: Attribute Binding"/> <h:outputText value="Step 5: Component Binding"/> <h:outputText value="Step 6: Final Version"/> <h:outputText value="Step 7: Creating a Deployable Jar File"/> <h:outputText value="What Next?"/> </h:panelGrid> </d:ticker> </h:form> </f:view> </body> </html>

We have added the overflow: auto to the style class to make our text area scrollable, replaced a style attribute with the two size attributes and, finally, replaced the text greeting message with something new one. You can put any other code here if you want. Run and test the application. It should show the scrollable text area with the dark blue border around it. If you see this, you have successfully passed the tutorial. We have only one more

page 27 of 32

How to Write Your Own JSF Components

Step 6: Final Version

question to answer: How to distribute what we have done? We will dedicate the last step to this question.

page 28 of 32

How to Write Your Own JSF Components

Step 7: Creating a Deployable Jar File

Step 7: Creating a Deployable Jar File

OK. We have created our own JSF component or, even have written a whole custom tag library. How do we make it reusable? How do we distribute it? Of course, you can copy your classes and TLD file to the new project and add records to the faces-config.xml file. It will work. However, this would be inconvenient to do each time, especially if your library contains several dozen tags with double that number of class files all requiring filling in the faces-config.xml file with references to those classes. No, this is definitely not a good way. We will choice another one. We will gather all of the information inside just one jar file and this will be the only one file we have to distribute. To make a long story short, this is the structure of our taglib jar file:

The package ticker contains compiled classes for our ticker component. The top level META-INF folder contains the TLD file. It also contains the faces-config.xml file where the components, but nothing else are defined. To separate the components configuration from other stuff in the configuration file, lets split faces-config.xml into two files. Create the WEB-INF/faces-config-demo.xml file with the following content:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN" "http://java.sun.com/dtd/web-facesconfig_1_0.dtd"> <faces-config> <managed-bean> <managed-bean-name>BannerPageBean</managed-bean-name> <managed-bean-class>demo.BannerPageBean</managed-bean-class> <managed-bean-scope>request</managed-bean-scope> <managed-property> <property-name>rendered</property-name> <property-class>java.lang.Boolean</property-class> <value/> </managed-property> </managed-bean> <application> <locale-config/> </application> <factory/> <lifecycle/> </faces-config>

Remove the information about the managed bean from the faces-config.xml file. The resulting content of this file will then be the following:
<?xml version="1.0" encoding="UTF-8"?>

page 29 of 32

How to Write Your Own JSF Components

Step 7: Creating a Deployable Jar File

<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN" "http://java.sun.com/dtd/web-facesconfig_1_0.dtd"> <faces-config> <component> <component-type>ticker</component-type> <component-class>ticker.UITicker</component-class> </component> <application> <locale-config/> </application> <factory/> <lifecycle/> </faces-config>

To have our demo application working, we have to add the information about the new configuration file into the web.xml. This will be the content of this file:
<?xml version="1.0" encoding="UTF-8"?> <web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee web-app_2_4.xsd" version="2.4"> <context-param> <param-name>javax.faces.STATE_SAVING_METHOD</param-name> <param-value>server</param-value> </context-param> <context-param> <param-name>javax.faces.CONFIG_FILES</param-name> <param-value>/WEB-INF/faces-config.xml,/WEB-INF/faces-config-demo.xml</param-value> </context-param> <listener> <listener-class>com.sun.faces.config.ConfigureListener</listener-class> </listener> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>Faces Servlet</servlet-name> <url-pattern>*.jsf</url-pattern> </servlet-mapping> </web-app>

To make assembling the resulting jar file archive easier, we need to add the following code into the build.xml file:
<property name="taglib.distname" value="mylib.jar"/> <property name="taglibdeploy.dir" value="deploy"/> <target name="createtaglib" depends="compile" description="Create deployable tag libraries file"> <delete dir="${build.dir}"/> <mkdir dir="${build.dir}"/> <mkdir dir="${build.dir}/META-INF"/> <copy todir="${build.dir}/ticker"> <fileset dir="${webinf.dir}/classes/ticker"/> </copy> <copy file="${webinf.dir}/faces-config.xml" todir="${build.dir}/META-INF"/> <copy file="${webinf.dir}/ticker.tld" todir="${build.dir}/META-INF"/> <mkdir dir="${taglibdeploy.dir}"/> <jar basedir="${build.dir}" jarfile="${taglibdeploy.dir}/${taglib.distname}"/> </target>

page 30 of 32

How to Write Your Own JSF Components

Step 7: Creating a Deployable Jar File

In this file, the first property defines the name of the result archive. The second one defines the folder where the archive will be placed. To use the new Ant target coding we added, go to the Ant folder and run the script by typing from the command line:
ant createtaglib

To see how this works now, copy the mylib.jar file to the WEB-INF/lib folder of any JSF project. Then insert your new custom tag on one of the JSP pages. Dont forget to insert at the top of the page the definition:
<%@ taglib uri="http://jsftutorials.com/" prefix="d" %>

If you do everything right, the custom tag should work properly.

page 31 of 32

How to Write Your Own JSF Components

What Next?

What Next?
In this tutorial we have created new JSF components all the way from scratch to a deployable package. In this example, we have covered the major points you will need in order to create any JSF component. However, our example does not show all of the aspects of JSF component building. You now have just the basic knowledge. If writing JSF components is going to be your job, you will need to learn more before you will become an expert in this area.

Additional Topics
Some of the aspects you will need to learn that were not covered in this tutorial are mentioned below. Processing user input. If your component accepts data entered or selected by the user, you need to take care of encoding or decoding the date. Such a component might need to support validators, value changed listener, data converters. Working with Facets. Facets are similar to children, but they have names. It is up to the component how to process them. For example, the gridPanel from the standard JSF library has two facet elements for header and footer. It does not matter where the facet is located in the JSP code, the renderer always puts the header at the top and footer at the bottom. Custom rendering of the existing components. In our example, the getRendererType method of the TickerTag returns null. This means that the component renders itself. If this method returns any value, it makes it possible to overwrite the default rendering provided by the UITicker class. For this purpose, you or anybody else can add a new renderer with the defined name to the render-kit section of the faces configuration file. In the same way, you can implement rendered for any standard JSF components. All of the render type names can be found in the JSF specification. Action components. You can extend your component from the UICommand class. This allows you to write components similar to a command button or a link, but with advanced behavior. For example, you can implement tabbed panels or drop-down menus.

JSF Resources
Beyond this tutorial, there are many resources that will help you go further with JSF. There are already a number of published books dedicated to JavaServer Faces. We recommend reading chapter 9 of the Core JavaServer Faces book by David Geary and Cay Horstmann. It contains very useful information regarding JSF component development. There are also several other types of resources available. We support the jsftutorials.net Web site where you can read other JSF tutorials. Also, if you or your company are interesting in learning JSF technology, Exadel, Inc. has introduced a new JSF Course. You can read information about it on this CD. We are going to prepare several more courses that cover all levels from beginner to expert. The first course for beginners will be completed in the near future. For more information visit our corporate Web site at www.exadel.com

page 32 of 32