0% found this document useful (0 votes)
109 views2 pages

Embedded Systems QP

The document appears to be a quiz on embedded systems and microcontrollers. It contains multiple choice questions about the features and specifications of 8051 and 8096 microcontrollers, including number of pins, register sizes, memory addresses, interrupt priorities, and serial communication protocols.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
109 views2 pages

Embedded Systems QP

The document appears to be a quiz on embedded systems and microcontrollers. It contains multiple choice questions about the features and specifications of 8051 and 8096 microcontrollers, including number of pins, register sizes, memory addresses, interrupt priorities, and serial communication protocols.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

KALAIGNAR KARUNANIDHI INSTITUTE OF TECHNOLOGY

KANNAMPALAYAM, COIMBATORE-641 402. Class Subject : VII Sem B.E/ECE Embedded Date :13.07.2012 Time : Marks 50 Mins 30

1. The 8051 microcontroller is of ___pin package as a ______ processor. a) 30, 1byte b) 20, 1 byte c) 40, 8 bit d) 40, 8 byte 2. The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit, on-chip 128 byte ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H 4. What is the address range of SFR Register bank? a) 00H-77H b) 40H-80H c) 80H-7FH d) 80H-FFH 5. Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1 6. What is the Address (SFR) for TCON, SCON, SBUF, PCON and PSW respectively? a) 88H, 98H, 99H, 87H, 0D0H. b) 98H, 99H, 87H, 88H, 0D0H c) 0D0H, 87H, 88H, 99H, 98H d) 87H, 88H, 0D0H, 98H, 99H 7. Match the following: 1) TCON i) contains status information 2) SBUF ii) timer / counter control register. 3) TMOD iii) idle bit, power down bit 4) PSW iv) serial data buffer for Tx and Rx. 5) PCON v) timer/ counter modes of operation. a) 1->ii, 2->iv, 3->v, 4->i, 5->iii. b) 1->i, 2->v, 3->iv, 4->iii, 5->ii. c) 1->v, 2->iii, 3->ii, 4->iv, 5->i. d) 1->iii, 2->ii, 3->i, 4->v, 5->iv. 8. Which of the following is of bit operations? i) SP ii) P2 iii) TMOD iv) SBUF v) IP a) ii, v only b) ii, iv, v only c) i, v only d) iii, ii only

9. Serial port interrupt is generated, if ____ bits are set a) IE b) RI, IE c) IP, TI d) RI, TI 10. In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1 11. Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96 12. 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register 13. How many synchronous and asynchronous modes are there in serial port of 8096?

You might also like