CMCC's Center for Workforce and Professional Development is excited to announce the launch of a new Manufacturing Technology short-term training program, in partnership with General Dynamics Bath Iron Works! Follow the link to learn more: https://lnkd.in/eaEXuPVs
Central Maine Community College’s Post
More Relevant Posts
-
Tomorrow -- Join our local Michigan SME Chapter at Oakland Community College to learn about laser welding from an expert in material joining This free seminar is open to all students and professionals in the area Come by to meet the SME team and learn something new https://conta.cc/3JNnN2u #sme #welding #joining #manufacturing
For Students and Professionals
myemail-api.constantcontact.com
-
"Dive into the world of steel manufacturing with Redconsteel! Our training program offers a comprehensive curriculum designed to equip engineers with the skills they need to succeed. Check out these highlights from our recent training sessions and see the difference for yourself. #RedconsteelTraining" #EngineeringSkills"
-
Providing simple solutions to complex problems, HaF engineers tackle challenges head-on. This week, we're recognizing our whole team's incredible dedication to making the impossible possible! #HaFEquipment #MaterialHandling #BulkMaterialHandling #MaterialHandlingSolutions #Manufacturing #MaterialHandlingEquipment #EngineersWeek #Engineers
-
-
Expertise in Time Management || Undergraduate in Industrial and Production Engineering at KUET
Embarked on a 6-day industrial training at BSRM Steel Limited. - Goal: Comprehensive understanding of steel production process. - Priority: Safety protocols and efficiency. Activities: - Basic safety training: Prioritized safety from day one. - Hands-on experience: Explored induction furnace operation, ladle refining, and continuous casting. - Preparation: Learned furnace, ladle and tundish preparation techniques. - Optimization: Explored scrap segregation methods for efficient scrap utilization. - Quality control: Conducted billet inspections, macro sample tests, and learned about billet grades. Experiences: - Invaluable insights: Mastered safety procedures and operational challenges. - Professional growth: Grateful for learning from industry experts. - Contribution: Excited to contribute to the dynamic realm of steel production. #SteelProduction #IndustrialTraining #BSRMSteel #LearningExperience
-
ADIS - 2nd Semester - 28215 - Safety in Engineering Industries - ALL Chapters (1 to 6) including sample MCQs. https://lnkd.in/gtAC237E
28215 - Safety in Engineering Industries - YouTube
youtube.com
-
Certified MIG welder. Certified TIG welder. Certified NDT Technician. Having more than 8 yers of experience.
Learn skills only at TOP WELD TRAINING SCHOOL BRAMPTON. *how to grind *how to cut *how to measure *And finally how to weld Join @topweldtraining.ca
-
In Coventry Schools, the workforce pipeline starts early, exposing elementary students to #STEM fields and maritime trades. These hands-on lessons include pipefitting, machining, and welding, inspiring young people to consider careers in defense someday. #NationalSubmarineDay
-
-
Last week, we had the pleasure of co-hosting with Asad M. an insightful training class focused on estimating within the collision industry. Our attendees, a mix of seasoned professionals and eager newcomers, gathered to sharpen their skills and learn about the latest trends As the collision industry evolves, so does the role of the estimator. Estimating is more than just crunching numbers; it’s about understanding the intricate dance between damaged vehicles, repair processes,insurance partners and customer expectations. The highlight of the class was the real-world scenarios where participants applied their knowledge to create comprehensive estimates. These exercises not only reinforced learning but also fostered a collaborative environment where experiences and strategies were shared. Thanks again Andrew Neufeld for your support and help organizing. #Axalta,@fixnetworkcanada ,#Estimating,#CollisionRepair
📢 Training Spotlight: AXALTA Estimating Course at Our Milton Training Center! 🚗✨ We are excited to share that our team recently participated in a comprehensive 1-day Estimating course presented by AXALTA at our Milton Training Center. This valuable training session focused on enhancing the skills and knowledge of our estimators to improve the consistency and quality of our estimates. During the course, participants delved into: 🔹 The importance of sales mix and the estimator's role in it 🔹 Adhering to OEM procedures 🔹 Understanding the estimating process in repairs 🔹 Identifying missed opportunities in body and paint 🔹 Strategies for supplement reduction Our team also engaged in practical exercises, writing and comparing estimates while discussing opportunities and best practices. This hands-on approach ensured that the course covered more than just the basics, providing our estimators with insights that will positively impact their work. Thank you, Axalta , for this enriching experience! 🙌 #Training #Axalta #Estimating #CollisionRepair #FixNetworkCanada
-
-
Endless time savings, capabilities like no other product out there, and ease of use! This is a game changer... order here https://lnkd.in/gKiGEvFT #machining #machineshop #engineering #toolmaker #quality #jobshop #manufacturing #leanmanufacturing #sixsigma #cnc #milling #cncmachinist #metalwork #machinistlife #5axis #cncmill #metal #machine #engineer #innovation #laserengraving #laser #tumbling #continuousimprovement #efficient #CAD #Bobcad #Solidworks
Visit to Vantage Career Center to get feedback from the instructors and students. We received all positive reviews from the students and instructors. One benefit that caught their attention is the ability to reach a location not in line with the T-Slots. The smaller width tables, like in the machine shown here, don't allow you to keep the vise in the center of the table. This causes issues with having to rig up a stop with toe clamps, angle iron, etc. With the EMT Quick Stop you can easily reach from the closest T-Slot and get to your jaw location. Here's a video of the instructor installing the stop for the first time. Imagine the time you can save on every set up, every day, year after year. Order here: https://lnkd.in/g_C7pWzN HLN Machining LLC Jason Leis
-
Visit to Vantage Career Center to get feedback from the instructors and students. We received all positive reviews from the students and instructors. One benefit that caught their attention is the ability to reach a location not in line with the T-Slots. The smaller width tables, like in the machine shown here, don't allow you to keep the vise in the center of the table. This causes issues with having to rig up a stop with toe clamps, angle iron, etc. With the EMT Quick Stop you can easily reach from the closest T-Slot and get to your jaw location. Here's a video of the instructor installing the stop for the first time. Imagine the time you can save on every set up, every day, year after year. Order here: https://lnkd.in/g_C7pWzN HLN Machining LLC Jason Leis
Assistant Director at Looking Ahead Clubhouse
2moLove this