Lumafield

Thank you to everyone that came out to our booth at RAPID + TCT! We had a lot of great conversations and look forward to seeing you next time. Curious about how industrial CT provides the perfect companion technology to 3D printing? Learn more here: https://lnkd.in/g6kyMhJ4

After years of outsourcing CT scans for failure analysis, this multinational medical technology company looked to bring their inspection process in-house. Our Neptune X-ray CT scanner met their high standards for IQ/OQ reporting as well as the FDA's regulations. They were able to cut down their failure analysis process from weeks to minutes, increasing their annual scan volume by 4,750% and saving over $335K in outsourcing costs. "Scanning at this volume was something we never could have afforded before we found Lumafield. It has completely transformed our understanding of defective products and allowed us to address defects the same day they arise. The impact has been incredible."           — Director of Quality Control https://lnkd.in/gkHv28B2

Our coffee bean roast investigation featured by Hardware FYI! ☕️

We CT scanned a SawStop to understand how it changes when fired! 🪚 Join us as we explore how this clever finger-saving, perhaps life-saving device works through the eyes of industrial CT. At Lumafield, our entire team is always coming up with ideas of cool things to scan. This one is courtesy of Matthew Alpert, Ph.D., whose curiosity about the SawStop on his own table saw set this project into motion. Stay tuned for more CT investigations from the Lumafielders who know Neptune and Voyager best.  Check out the scans for yourself: https://lnkd.in/gdRneYgh

Are you attending RAPID + TCT? Come by Lucky Strike on Weds June 26th at 6:30pm for an evening of bowling and lively conversations around 3D printing and CT scanning. We have a few spots open! Send an email to [email protected] if you're interested in joining.

Are you attending RAPID + TCT? Come by Lucky Strike on Weds June 26th at 6:30pm for an evening of bowling and lively conversations around 3D printing and CT scanning. We have a few spots open! Send an email to [email protected] if you're interested in joining.

Ever wondered what happens to coffee beans as they're roasted? We CT scanned Four Barrel Coffee beans roasted with a vintage PROBAT UG15 from raw all the way to dark roast to see what transformations they undergo. Check out our blog for details and to explore the scans for yourself. https://lnkd.in/g-4Qsm-f

We CT scanned coffee beans at different stages of roasting. Thank you FOURBARREL COFFEE for giving us some coffee beans to scan ☕ And a huge thanks to their roast-master, Ryan Woodrow, for being so generous with his time and showing us their roasting process!

Ever wondered what happens to coffee beans as they're roasted? We CT scanned Four Barrel Coffee beans roasted with a vintage PROBAT UG15 from raw all the way to dark roast to see what transformations they undergo. Check out our blog for details and to explore the scans for yourself. https://lnkd.in/g-4Qsm-f

An iconic running shoe manufacturer faced the challenge of locating punctures within a shoe that weren’t immediately apparent in their CT data.  . . . . . Our Solutions Engineers innovated with a novel application of a contrast agent. This allowed the shoe designers to pinpoint the weaknesses in the material and gain traction internally for other teams to explore the capabilities of their Neptune scanner. "The team at Lumafield acted fast and helped us find the most efficient solution when we weren’t quite sure how to scan for such small punctures. Improving our products has always been a team effort, and we’re grateful to have Lumafield on our team." — VP of R&D, Running Learn how this industry leader replaced destructive testing with industrial CT: https://lnkd.in/gJHA7jSx