CECS OF CT LLC-Distributor for Aerospace Manufacturing & Metalworking Industrial Tools

Bison SET-TRU Scroll Chucks - 0.0004" TIR 🚩 Buy it Now : https://lnkd.in/e_cANvBk ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://lnkd.in/edeBZVKw 🔗eBay Store: https://lnkd.in/ejk6z7gn 🔗Amazon Store: https://lnkd.in/erbUuRPN 🚩 SET-TRU Scroll Chucks: ⚙ Type 3565 - 3-Jaws Chucks with Two-Piece Hard Reversible Jaws ⚙ Type 3564 - 3-Jaws Chucks with Hard Solid (ID/OD) Jaws ⚙ Type 3765 - 4-Jaws Chucks with Two-Piece Hard Reversible Jaws ⚙ Type 3865 - 6-Jaws Chucks with Two-Piece Hard Reversible Jaws ⚙ Type 3864 - 6-Jaws Chucks with Hard Solid (ID/OD) Jaws 🔻 SET-TRU Chuck Features and Benefits: ✔ 🔎Fine adjustment ✔ 💪Forged steel body ✔ 3 pinion design ✔ 4 micro adjustment screws provide🥇 .0004" T.I.R. repeatability ✔ 16", 20" and 25" diameter chucks with 3 jaws and 6 jaws use 8 micro adjustment screws achieving extremely high gripping concentricity ✔ Two piece top and master jaws are American Standard tongue and groove ✔ 4" diameter chuck has 2 sets of solid jaws ✔ 💪Chuck body is constructed of high quality forged steel, making it safe to run at 🚀 high lathe speeds ✔ Scrolls are forged and fully hardened with thread flanks ground on both sides, then precisely balanced for 📈 longer life and 🎯 higher accuracy ✔ Each scroll is precisely balanced ✔ Jaw teeth and guides on both sides are fully hardened and ground. Hardened and ground bushings are pressed into the pinion seats. Pinions in 3 pinion models are hardened and ground ✔ Each chuck is balanced within fine limits ✔ Steel mounting plates are interchangeable with Bison SET-TRU chucks of the same size so that one chuck can be used on different spindles ✔ The life of your Bison chuck can be extended significantly through proper maintenance. It must be cleaned on a regular basis as recommended ✔ For the best gripping results, use the Bison recommended chuck grease: Part Number 7-799-025

Riten CNC Lathe Live Centers We are full-line Riten Authorized Distributor 🎯 Buy it Now : https://lnkd.in/esq4y3QC ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://lnkd.in/esq4y3QC 🔗eBay Store: https://lnkd.in/gi9-NWkd 🔗Amazon Store: https://lnkd.in/erbUuRPN ⚙ Econo Tri-Bearing Live Center(Standard & Tracer Point) ⚙ C4T * Live Centers (Standard, Tracer & Long Point) ⚙ GPRTOPS Self-Adjusting Live Center(Standard & Tracer Point) ▶ Econo Tri-Bearing Live Center(Standard & Tracer Point) ✔ Accuracy guaranteed to ± .0002 ✔ Three rows of bearings ✔ Points are through-hardened to 61-63 Rc ✔ Sealed bearings lubricated for life, protected against contaminants and coolant ✔Non-repairable, trade-in available ▶ C4T * Live Centers (Standard, Tracer & Long Point) The 🥇 first and only live center with 🎯 permanent bearing protection ✔ Accuracy guaranteed to ± .00004 ✔ Ideal for applications which use high-pressure coolant ✔ Inpro/Seal bronze non-contacting bearing isolator seal turns freely, runs cooler, and will never wear out ✔ Point configuration allows for tool clearance ✔ Center for Tomorrow ✔ Riten full service and repair ▶ GPRTOPS Self-Adjusting Live Center(Standard & Tracer Point) 🚀 Self-Adjusting Live Centers ✔ Accuracy guaranteed to ± .0001. ✔ Bellville washers for automatic compensation for thermal expansion ✔ Selectable axial clamping pressure range: light, medium or heavy. ✔ Four-point support for high axial and radial loads. ✔ Double labyrinth seal protects bearings from coolants and contaminants. ✔ Imported from Switzerland. Serviced and repaired in the U.S. by Riten. ✔ Replaces Sandvik, Madison and SFJ live centers

CNC Lathe Bushing Set - Talon Precision 🎯 Buy it Now: https://lnkd.in/eN5f--yC ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://store.cecs.us 🔗eBay Store: https://lnkd.in/eaTJCa8J ⚙ Type "B" : Type B Bushings “Split Bushings” are designed for use on all NC and CNC turning machines and provide a flexible gripping option for Drills, Boring Bars, and other round shank tools. Heat treated and precision ground. ⚙ Type "J" : Type J Bushings are designed for use on all NC and CNC turning machines and have a long solid body and two holes so that you can clamp directly on the tool with set screws for positive alignment of the cutting edge of the tool. They are used to adapt Drills, Boring Bars, and other round shank tools. ⚙ Type "CV" : Type CV Bushings are designed for use on all NC and CNC turning machines to adapt a wide variety of Boring Bars, Drills, Reamers and other round Shank type tools. All CV Type Bushings have a long slot so that you can clamp directly on the tool for positive alignment of the cutting edge of the tool. Heat treated and precision ground. ⚙ Type "C" : Type C Bushings are designed for use on all NC and CNC turning machines to adapt a wide variety of Boring Bars, Drills, Reamers and other round Shank type tools. All C Type Bushings have a long slot so that you can clamp directly on the tool for positive alignment of the cutting edge of the tool. Heat treated and precision ground. ⚙ Type "DD" : Combines "B" Style (Split Bushing) with "J" Style (with two set screws holes) allowing DD Bushing to be used as either "B" or "J". Each bushing has split, a flat and either two or four set screw holes. ⚙ Type "Z" : Designed with a long slot and two set screws in the bushing head. Provide improved rigidity and reduce chatter.

Fixture up with Inspection Arsenal and Laser Arsenal Loc-N-Load fixture systems and Make Production 🥇 Faster Than Ever Before! 🚩 Buy it Now : https://lnkd.in/gpWKZeJM ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://lnkd.in/edeBZVKw 🔗eBay Store: https://lnkd.in/gi9-NWkd 🔗Amazon Store: https://lnkd.in/erbUuRPN 🔎 Inspection Arsenal 💎 CMM 💎 3D Gage Arm 💎 Optical Comparator 💎 Vision Inspection ⚙ Inspection Arsenal® : From the spindle to the shipping dock, the ability to get inspection data back to the shop floor 🚀 quickly and 🎯 accurately improves the entire production pipeline— and your 💰 profits! Quality inspection no longer needs to be complex, costly and time consuming. Modular fixturing reduces downtime, running at risk, and overproduction. ⚙ Laser Arsenal® : The same unique design of Loc-N-Load™ provides the only dedicated, modular fixture system for laser marking and welding processes. Operators can 🚀quickly and easily fixture parts in v-groove or pocketed trays or create custom and semi-custom setups on standard plates using a variety of work holding components. ⚙ Loc-N-Load™ and Open-Sight™ : for Inspection and Laser Marking - A universal modular fixturing system that provides a complete arsenal of work holding for inspection and laser marking machines. The freedom of 🚀 quick swap fixturing helps you inspect and process parts 🚀 faster than ever before. Simple versatility removes the complexity and tribal knowledge related to part fixturing and enhances the value of these processes. Operators and less-skilled employees can now easily 🔎 inspect and mark parts, leaving your high-level programmers to focus on more complex work. Deliver perfect parts faster with Inspection Arsenal® and Laser Arsenal®. ✔ Enjoy a rapid return on investment. ✔ Process more parts per shift. ✔ Create multiple quick-swap setups per machine. ✔ Move fixtures from one machine to another. ✔ Cross-train more employees, quickly. ✔ Adapt and reuse existing fixtures effortlessly. ✔ Access granite or surface easily ✔ Use palletization techniques ✔ Work toward some lights-out processing ✔ Use as dedicated tooling - add it to your job box ✔ Ships immediately, as product is ready-made ❇ Phillips Precision is your one source for quick-swap, modular inspection fixture and laser marking products, fast and creative custom fixture designs, and quick shipping of orders.

Representing Bison Workholding Products for past 🎈 25 years ! 🚩 Buy it Now : https://lnkd.in/e_cANvBk ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://lnkd.in/edeBZVKw 🔗eBay Store: https://lnkd.in/ejk6z7gn 🔗Amazon Store: https://lnkd.in/erbUuRPN 📇 Products Offering : 🔻 Manual Lathe Chucks 🔹 3205 - Self-Centering Scroll Chuck - 3 Jaw 🔹 3545 - Self-Centering Scroll Chuck - 3 Jaw 🔹 4304 & 4037 - Independent Chuck - 4 Jaw 🔹 3605 - Self-Centering Scroll Chuck - 4 Jaw 🔹 3565 - Set-Tru Adjustable Scroll Chuck - 3 Jaw 🔹 3865 - Set-Tru Adjustable Scroll Chuck - 6 Jaw 🔹 3515 HD - Oil Country Scroll Chuck - 3 Jaw 🔹 3285 - Oil Country Scroll Chuck - 3 Jaw 🔹 3597 - Oil Country Scroll Chuck - 3 Jaw 🔹 4347 HD - Independent Oil Country Chuck - 4 Jaw 🔹 4317 HD - Independent Oil Country Chuck - 4 Jaw 🔹 5C & 16C Collet Chuck 🔹 Semi Machined Back Plates (Rough, Threaded, A1/A2 & Camlock (D1) Spindles ) 🔹 Fully Finished Back Plates (A2 , Camlock (D1), Faceplate for Indexing Fixtures, Baseplate for Milling Machine) 🔹 8292 - Haas Chuck Packages - 3 Jaw 🔹 9154 - Rotating Chucks for Tailstocks - 3 Jaw 🔹 Master Jaws for Lathe Chucks 🔹 Hard Top Jaws for Scroll Chucks 🔹 Soft Top Jaws for Scroll Chucks 🔻 Power Lathe Chucks & Cylinders 🔹 2105-K - Power Chuck - 2 Jaw 🔹 2405-K - Power Chuck - 3 Jaw 🔹 2605-K - Power Chuck - 4 Jaw 🔹 2502 - Pneumatic Power Chuck - 3 Jaw 🔹 2500 - Pneumatic Power Chuck - 3 Jaw 🔹 Top Jaws for Power Chucks 🔻 Stationary Workholding 🔹 6622 - Machine Vise 🔹 6624 - Machine Vise 🔹 6522 - Two-Piece Machine Vise 🔹 6523 - Hold-Tight Machine Vise 🔹 6531 - Self-Centering Machine Vise 🔹 6632 - Precision Vise 🔹 6546 - Vise for Shafts 🔹 1271 - Heavy Duty All Axis Vise 🔹 6830 - Precision High Pressure Vise 🔹 6620 - Precision Vise 🔹 9171 MSPD - Box Jaw with Power Screw 🔹 9170 - Box Jaw Sets 🔹 5859 - Rotary Table 🔹 5901 - Super Spacers 🔹 5818 - Tailstock 🔹 5819 - Adjustable Tailstock 🔻 Live & Dead Centers 🔹 8811R - Premium Live Center 🔹 8812R - Premium Slim Body Live Center 🔹 8813R - Premium Extended Point Slim Body Live Center 🔹 8814R - Premium Extended Point Live Center 🔹 8811-P - Super Precision Live Center 🔹 8814 NC - NC Extended Point Live Center 🔻 Toolholders

We are 🎯 authorized distributor for Mitee-Bite Workholding Products: (🏆 Most popular items are in stock - 🥇 ready to ship same day) 🚩 Buy it Now : https://lnkd.in/edeBZVKw ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://lnkd.in/edeBZVKw 🔗eBay Store: https://lnkd.in/eKPMZYix 🔗Amazon Store: https://lnkd.in/erbUuRPN 📇 Product Offering Includes: 🔹 Compact Toe Clamp 🔹 Fixture Clamp 🔹 T-Slot Toe Clamp 🔹 Uniforce Clamp 🔹 Knife Edge Clamp 🔹 Series-9 Clamp 🔹 Machinable Fixture Clamp 🔹 OK-Vise Clamp 🔹 Talon-Grip Vise Jaws 🔹 Versa-Grip Vise Jaws 🔹 Collet Wrenches (3J, 5C & 16C) 🔹 Pitbull Clamp 🔹 ID Xpansion Clamp 🔹 T-Slot Clamp Kit 🔹 Kopal Mini Clamp & Stop 🔹 Vacuum System 🔹 Kopal Clamp 🔹 Quick-Change Receiver and Blank Pallet 🔹 Loc-Down System 🔹 Manual Actuator for Mills & Lathes 🔹 Side-Loc Xpansion Clamp 🔹 Modular XYZ Xpansion Pins 🔹 HD T-Slot Clamp ❇ Company Profile : Mitee-Bite Products, LLC began in 1986 in an oversized 2 car garage with the original Mitee-Bite hex clamp created to save time on a reoccurring production job and grew to become the innovator of compact, low-profile edge clamps for CNC machining. Fast forward more than 30 years later and we continue to develop new products providing customers with a wide assortment of high-density low profile clamping solutions and assistance with clamping recommendations. We have expanded to also provide top level CAD designs and complete turn-key projects. We place our focus on what matters most on your shop floor… MAKING CHIPS! Keeping the spindle running, cutter engagement, reducing idle spindle time, saving on material cost, reducing set-up times and standardization, all contribute to our belief “let the machines work harder while you lower your labor cost and increase capacity.”

Narex VHU 🎯Precision Boring & Facing System. Boring Range : 0 to 31" ⚙ Model VHU-36, Range : 0-9" ⚙ Model VHU-56, Range : 0-13" ⚙ Model VHU-80, Range : 0-16" ⚙ Model VHU-125, Range : 0-24" ⚙ Model VHU-160, Range : 0-31" 🚀Buy it Now : https://lnkd.in/esrkF-QP ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://store.cecs.us 🔗eBay Store: https://lnkd.in/eaTJCa8J VHU- as boring device-considerably increases possibilities of boring, drilling and milling machines. These heads are suitable for precision boring of cylindrical holes, and for machining of external cylindrical surfaces. The boring head VHU by means of an automatic slide feed makes possible facing, back-facing and taper machining. The slide fee is adjustable in three or four grades and is stopped on adjustable dog by the pin clutch. The feed is derived from the rotary motion of the head, if one of the feed is adjusted, the pin of the clutch is put in and the brake ring is held by means of the stop bar. The screw serves for quick adjusting of slide and, or the contrary, the worm with the scale is used for find adjusting of precision boring. (1 division = slide movement of 0,005mm.) These heads are delivered with primary accessories in boxes. The taper shank is exchangeable and it is not a component of primary accessories. Therefore it is necessary to order taper shank as separate items.

🚀 Tooling up existing/new CNC Machine, we got you cover with customized CNC CAT 40, CAT 50, BT 30, BT 40 & ISO 20 Tooling Kits. 🎯 Buy it Now : https://lnkd.in/eyKaUvBk (💰Huge Saving) ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://store.cecs.us 🔗eBay Store: https://lnkd.in/eaTJCa8J 🔻Kit Includes: ❇ End Mill Holder ❇ Collet Chuck ❇ Collets ❇ Wrench ❇ Pull Stud / Retention Knob ❇ Tightening Fixture ❇ Shell Mill Holder ❇ Drill Chuck ❇ Milling Chuck ❇ Hydraulic Chuck ❇ Tension & Compression Tapping Holder ❇ Rigid Tapping Holder ❇ Rigid & Tension Compression Tapping Collet

PinzBOHR Precision BohrSTAR Boring Kits for CNC Mills and Lathes 🥇 Guarantee for Life Time 🏆 Repair or Replace if the head ever fails for any reason BohrSTAR kits are designed for maximum performance and ease-of-use (no spacers or complicated set-ups). PinzBOHR boring tools out perform all others when it comes to 🥇accuracy, 🥈rigidity, and 🥉repeatability. PinzBOHR exclusive, modular coupling system features two, tapered locking screws that provide maximum rigidity between the boring head and the toolholder to increase accuracy. All connections are easily made using the tools provided. PinzBOHR European made boring tools have been proven world wide to be among the best you can buy. Machinists love our boring tools because they are easy-to-setup, dead nuts accurate, and stand up to the toughest challenges. We're extremely confident that once you try our boring tools you will become a regular customer. ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://lnkd.in/eHnQyd-A 🔗eBay Store: https://lnkd.in/eaTJCa8J 🔗Amazon Store: https://lnkd.in/erbUuRPN 🔻 Available Kits: ➡ PinzBOHR 0.314" to 1.692" BohrSTAR 43 Rhombic Inserts Precision Boring Kit ➡ PinzBOHR 0.314" to 1.692" BohrSTAR 43 Triangular Inserts Precision Boring Kit ➡ PinzBOHR 0.314" to 3.94" BohrSTAR 100 Triangular Inserts Precision Boring Kit ➡ PinzBOHR 0.314" to 3.94" BohrSTAR 100 Rhombic Inserts Precision Boring Kit ➡ PinzBOHR 0.314" to 6.69" BohrSTAR 170 Triangular Inserts Precision Boring Kit ➡ PinzBOHR 0.314" to 6.69" BohrSTAR 170 Rhombic Inserts Precision Boring Kit ➡ PinzBOHR 0.314" to 8.27" BohrSTAR 210 Triangular Inserts Precision Boring Kit

Do not throw-away money for top brand carbide roughing end mills. Try our end mill to get same performance. Hundreds of repeated customer. ☎ Phone: 401-490-1141 📧 e-mail: [email protected] 🔗 Website: www.cecs.us 🔗 e-Commerce site: https://store.cecs.us 🔗eBay Store: https://lnkd.in/eaTJCa8J ✳ Carbide Roughing End Mill - Standard Length ✳ Carbide Roughing End Mill - Long Length ✳ Variable Helix Carbide Heavy Duty Roughing End Mill - Stub Length ✳ Variable Helix Carbide Heavy Duty Roughing End Mill - Standard Length 🔻 Application : ✔ Carbon Steel ✔ Tool Steel ✔ Titanium ✔ Stainless Steel ✔ Nickel Based Alloy ✔ Cobalt Alloy 📌 Fine-Pitch Carbide Roughers: These carbide rougher's are designed with proprietary knuckle geometry. This design maximizes strength at the cutting edge to remove the maximum amount of material with minimal vibration or chatter. This tool works well for hardened steels, titanium, Inconel and other space age materials while milling faster than conventional finishing end mills 📌 Variable-Helix (VH) Heavy Duty Carbide Roughers: The ultimate “HD Carbide Rougher” has the same proprietary knuckle geometry, and then we added our unique variable helix geometries. This design takes this tool to the next level of high material removal rates. This tool is designed to remove the maximum amount of material with minimal vibration or chatter. These tools are excellent for slotting and profiling while reducing cycle time and extending the life of the tool. This tool works well for hardened steels, titanium, Inconel and other space age materials while milling faster than conventional roughing end mills. 📍 AlTiN (Aluminum Titanium Nitride) Properties: Good lubricity and exceptional heat resistance. Applications: Carbon Steels, Alloy Steels, Tool Steels, Ni Alloys, Ti Alloys, 300 / 400 PH Stainless. Recommended for: Stainless steels, Ni alloys, Ti alloys, & other high temperature alloys.