TestMu 2025 - The Largest Virtual Software Testing Conference is Back | 50,000+ Attendees

How to use get_mean_tx_pps method in lisa

Best Python code snippet using lisa_python

dpdktestpmd.py

...359        )360    def get_mean_rx_pps(self) -> int:361        self._check_pps_data("RX")362        return _mean(self.rx_pps_data)363    def get_mean_tx_pps(self) -> int:364        self._check_pps_data("TX")365        return _mean(self.tx_pps_data)366    def get_max_rx_pps(self) -> int:367        self._check_pps_data("RX")368        return max(self.rx_pps_data)369    def get_max_tx_pps(self) -> int:370        self._check_pps_data("TX")371        return max(self.tx_pps_data)372    def get_min_rx_pps(self) -> int:373        self._check_pps_data("RX")374        return min(self.rx_pps_data)375    def get_min_tx_pps(self) -> int:376        self._check_pps_data("TX")377        return min(self.tx_pps_data)...

dpdkutil.py

Source: dpdkutil.py

...341        "txonly",342        pmd,343    )344    testpmd.run_for_n_seconds(testpmd_cmd, 10)345    tx_pps = testpmd.get_mean_tx_pps()346    log.info(347        f"TX-PPS:{tx_pps} from {test_nic.upper}/{test_nic.lower}:"348        + f"{test_nic.pci_slot}"349    )350    assert_that(tx_pps).described_as(351        f"TX-PPS ({tx_pps}) should have been greater than 2^20 (~1m) PPS."352    ).is_greater_than(2**20)353def verify_dpdk_send_receive(354    environment: Environment,355    log: Logger,356    variables: Dict[str, Any],357    pmd: str,358    use_max_nics: bool = False,359    use_service_cores: int = 1,360) -> Tuple[DpdkTestResources, DpdkTestResources]:361    # helpful to have the public ips labeled for debugging362    external_ips = []363    for node in environment.nodes.list():364        if isinstance(node, RemoteNode):365            external_ips += node.connection_info[366                constants.ENVIRONMENTS_NODES_REMOTE_ADDRESS367            ]368        else:369            raise SkippedException()370    log.debug((f"\nsender:{external_ips[0]}\nreceiver:{external_ips[1]}\n"))371    test_kits = init_nodes_concurrent(environment, log, variables, pmd)372    check_send_receive_compatibility(test_kits)373    sender, receiver = test_kits374    kit_cmd_pairs = generate_send_receive_run_info(375        pmd,376        sender,377        receiver,378        use_max_nics=use_max_nics,379        use_service_cores=use_service_cores,380    )381    results = run_testpmd_concurrent(kit_cmd_pairs, 15, log)382    # helpful to have the outputs labeled383    log.debug(f"\nSENDER:\n{results[sender]}")384    log.debug(f"\nRECEIVER:\n{results[receiver]}")385    rcv_rx_pps = receiver.testpmd.get_mean_rx_pps()386    snd_tx_pps = sender.testpmd.get_mean_tx_pps()387    log.info(f"receiver rx-pps: {rcv_rx_pps}")388    log.info(f"sender tx-pps: {snd_tx_pps}")389    # differences in NIC type throughput can lead to different snd/rcv counts390    assert_that(rcv_rx_pps).described_as(391        "Throughput for RECEIVE was below the correct order-of-magnitude"392    ).is_greater_than(2**20)393    assert_that(snd_tx_pps).described_as(394        "Throughput for SEND was below the correct order of magnitude"395    ).is_greater_than(2**20)396    return sender, receiver397def verify_dpdk_send_receive_multi_txrx_queue(398    environment: Environment,399    log: Logger,400    variables: Dict[str, Any],401    pmd: str,402    use_max_nics: bool = False,403    use_service_cores: int = 1,404) -> Tuple[DpdkTestResources, DpdkTestResources]:405    test_kits = init_nodes_concurrent(environment, log, variables, pmd)406    check_send_receive_compatibility(test_kits)407    sender, receiver = test_kits408    kit_cmd_pairs = generate_send_receive_run_info(409        pmd,410        sender,411        receiver,412        txq=4,413        rxq=4,414        use_max_nics=use_max_nics,415        use_service_cores=use_service_cores,416    )417    results = run_testpmd_concurrent(kit_cmd_pairs, 15, log)418    # helpful to have the outputs labeled419    log.debug(f"\nSENDER:\n{results[sender]}")420    log.debug(f"\nRECEIVER:\n{results[receiver]}")421    rcv_rx_pps = receiver.testpmd.get_mean_rx_pps()422    snd_tx_pps = sender.testpmd.get_mean_tx_pps()423    log.info(f"receiver rx-pps: {rcv_rx_pps}")424    log.info(f"sender tx-pps: {snd_tx_pps}")425    # differences in NIC type throughput can lead to different snd/rcv counts426    # check that throughput it greater than 1m pps as a baseline427    assert_that(rcv_rx_pps).described_as(428        "Throughput for RECEIVE was below the correct order-of-magnitude"429    ).is_greater_than(2**20)430    assert_that(snd_tx_pps).described_as(431        "Throughput for SEND was below the correct order of magnitude"432    ).is_greater_than(2**20)...

dpdkperf.py

Source: dpdkperf.py

...364        # send side fields365        sender = send_kit.testpmd366        sender_fields["role"] = "sender"367        sender_fields["tx_pps_maximum"] = sender.get_max_tx_pps()368        sender_fields["tx_pps_average"] = sender.get_mean_tx_pps()369        sender_fields["tx_pps_minimum"] = sender.get_min_tx_pps()370        # receive side fields371        receiver = receive_kit.testpmd372        receiver_fields["role"] = "receiver/forwarder"373        receiver_fields["rx_pps_maximum"] = receiver.get_max_rx_pps()374        receiver_fields["rx_pps_average"] = receiver.get_mean_rx_pps()375        receiver_fields["rx_pps_minimum"] = receiver.get_min_rx_pps()376        send_results = create_perf_message(377            NetworkPPSPerformanceMessage,378            send_kit.node,379            test_result,380            test_case_name,381            sender_fields,382        )...

Blogs

Check out the latest blogs from LambdaTest on this topic:

How To Use Appium Inspector For Mobile Apps

Let’s put it short: Appium Desktop = Appium Server + Inspector. When Appium Server runs automation test scripts, Appium Inspector can identify the UI elements of every application under test. The core structure of an Appium Inspector is to ensure that you discover every visible app element when you develop your test scripts. Before you kickstart your journey with Appium Inspector, you need to understand the details of it.

A Complete Guide To CSS Container Queries

In 2007, Steve Jobs launched the first iPhone, which revolutionized the world. But because of that, many businesses dealt with the problem of changing the layout of websites from desktop to mobile by delivering completely different mobile-compatible websites under the subdomain of ‘m’ (e.g., https://m.facebook.com). And we were all trying to figure out how to work in this new world of contending with mobile and desktop screen sizes.

Agile in Distributed Development – A Formula for Success

Agile has unquestionable benefits. The mainstream method has assisted numerous businesses in increasing organizational flexibility as a result, developing better, more intuitive software. Distributed development is also an important strategy for software companies. It gives access to global talent, the use of offshore outsourcing to reduce operating costs, and round-the-clock development.

What will come after “agile”?

I think that probably most development teams describe themselves as being “agile” and probably most development teams have standups, and meetings called retrospectives.There is also a lot of discussion about “agile”, much written about “agile”, and there are many presentations about “agile”. A question that is often asked is what comes after “agile”? Many testers work in “agile” teams so this question matters to us.

Developers and Bugs – why are they happening again and again?

Entering the world of testers, one question started to formulate in my mind: “what is the reason that bugs happen?”.

Automation Testing Tutorials

Learn to execute automation testing from scratch with LambdaTest Learning Hub. Right from setting up the prerequisites to run your first automation test, to following best practices and diving deeper into advanced test scenarios. LambdaTest Learning Hubs compile a list of step-by-step guides to help you be proficient with different test automation frameworks i.e. Selenium, Cypress, TestNG etc.