header_interior-pages banner_interior-pages-mobile

SENSORS

HS-1 Seismometer

HS-1

PRODUCT DETAILS

The HS-1 is an integral component in the vibration monitoring and analysis of machinery. This rugged, self-generating seismic sensor converts mechanical motion into an electrical signal, which is proportional to relative velocity. The HS-1’s dual-coil construction minimizes interference from electromagnetic fields.

FEATURES

  • Natural frequencies from 2.0 to 28 Hz
  • Sensitivities from 460 to 2000 mV per ips
  • Sensitive to motion along their longitudinal axes
HS-1@2x

MECHANICAL SPECIFICATIONS

Orientation Vertical and Horizontal available
Moving Mass 23 g (0.811 oz)
Maximum Coil Excursion p-p > 3.81 mm (0.15 in.)
Diameter 4.12 cm (1.62 in.)
Height (less stud) 5.08 cm (2.00 in.)
Stud Length 0.79 cm (0.31 in.)
Weight 247 g (8.70 oz)
Operating & Storage Temperature Range –45 to +100°C (–49 to +212°F)

ELECTRICAL SPECIFICATIONS 25°C

Frequency 2 Hz *
Spurious Frequency N.S.
Distortion N.S.
Coil Resistance 225 Ω *
Open-Circuit Sensitivity 18.11 V/m/s (0.46 V/i/s)
Sensitivity at 70% Damping 17.44 V/m/s (0.443 V/i/s)
Open-Circuit Damping 61%
Tilt Angle when coil hits end stop Vertical geophone = 14° | Horizontal geophone = 1.7°

Information Request

© 2024 Geospace Technologies
Design & development by versacreative.com