Page Fault Handling in Operating System Last Updated : 14 Jan, 2025 Comments Improve Suggest changes Like Article Like Report A page fault occurs when a program attempts to access data or code that is in its address space but is not currently located in the system RAM. This triggers a sequence of events where the operating system must manage the fault by loading the required data from secondary storage into RAM. Page faults are essential for implementing virtual memory systems that provide the illusion of a larger contiguous memory space. What is Page Fault?A page fault is a critical event in computer systems in which a program tries to attempt to access data or code that is not currently available in the physical memory (main memory). This occurrence is an integral part of virtual memory management which allows the system to physically fit large amounts of data efficiently in memory. So when a page fault occurs then the following sequence of events happens: Page Fault Handling ProcessTrap to Kernel: The computer hardware traps to the kernel and program counter (PC) is saved on the stack. Current instruction state information is saved in CPU registers. The hardware detects the page fault when the CPU attempts to access a virtual page that is not currently in physical memory (RAM).Save State Information: An assembly program is started to save the general registers and other volatile information to keep the OS from destroying it.Determine Cause of Fault: Operating system finds that a page fault has occurred and tries to find out which virtual page is needed. Sometimes hardware register contains this required information. If not, the operating system must retrieve PC, fetch instruction and find out what it was doing when the fault occurred.Validate Address: Once virtual address caused page fault is known, system checks to see if address is valid and checks if there is no protection access problem. Allocate Page Frame: If the virtual address is valid, the system checks to see if a page frame is free. If no frames are free, the page replacement algorithm is run to remove a page. Handle Dirty Pages: If frame selected is dirty, page is scheduled for transfer to disk, context switch takes place, fault process is suspended and another process is made to run until disk transfer is completed.Load Page into Memory: As soon as page frame is clean, operating system looks up disk address where needed page is, schedules disk operation to bring it in.Update Page Table: When disk interrupt indicates page has arrived, page tables are updated to reflect its position, and frame marked as being in normal state.Restore State and Continue Execution: Faulting instruction is backed up to state it had when it began, and PC is reset. Faulting is scheduled, operating system returns to routine that called it. Assembly Routine reloads register and other state information, returns to user space to continue execution.Causes of Page FaultsThere are several reasons of causing Page faults:Demand Paging: Accessing the page that is not currently loaded in the memory (RAM). Invalid Memory Access, it occurs when a program tries to access that memory which is it's beyond access boundaries or not allocated.Process Violation: when a process tries to write to a read-only page or otherwise violates memory protection rules. Types of Page FaultMinor Page Fault: Occurs when the required page is in memory but not in current process's page table. Major Page Fault: Occurs when the page is not in memory and must be fetched from disk. Invalid Page Fault: It happens when the process tries to access an invalid memory address. Impact of Page Faults or System PerformancePage Fault impact the system if it occurs frequentlyThrashing: If occurrence of page fault is frequent then the system spends more time to handle it than executing the processes, and because of which overall performance also degrades. Increased Latency: Fetching pages from disk takes more time than accessing them in memory, which causes to more delays. CPU Utilization: If the Page fault occur excessively than it can reduce CPU Utilization as the processor waits for for memory operations to complete or remain idle which is not efficient. ConclusionIn an operating system, page fault handling is an essential process that ensures smooth and efficient memory management. When a program tries to access data that isn't currently in the computer's physical memory (RAM), a page fault occurs. The operating system steps in to retrieve the necessary data from a slower storage (like a hard drive) and loads it into RAM. Although page faults can temporarily slow down a program, they are a normal part of how virtual memory works, allowing computers to run large applications efficiently without needing an excessive amount of physical memory. Effective page fault handling helps the system maintain performance and stability. Page Fault in Operating System Visit Course Comment More infoAdvertise with us Next Article What is an Operating System? S swasthik Improve Article Tags : Misc Operating Systems GATE CS memory-management Practice Tags : Misc Similar Reads Operating System Tutorial An Operating System(OS) is a software that manages and handles hardware and software resources of a computing device. Responsible for managing and controlling all the activities and sharing of computer resources among different running applications.A low-level Software that includes all the basic fu 4 min read OS BasicsWhat is an Operating System?An Operating System is a System software that manages all the resources of the computing device. Acts as an interface between the software and different parts of the computer or the computer hardware. Manages the overall resources and operations of the computer. Controls and monitors the execution o 5 min read Types of Operating SystemsAn operating system (OS) is software that manages computer hardware and software resources. It acts as a bridge between users and the computer, ensuring smooth operation. Different types of OS serve different needs some handle one task at a time, while others manage multiple users or real-time proce 9 min read Commonly Used Operating SystemThere are various types of Operating Systems used throughout the world and this depends mainly on the type of operations performed. These Operating Systems are manufactured by large multinational companies like Microsoft, Apple, etc. Let's look at the few most commonly used OS in the real world: Win 9 min read Operating System ServicesAn operating system is software that acts as an intermediary between the user and computer hardware. It is a program with the help of which we are able to run various applications. It is the one program that is running all the time. Every computer must have an operating system to smoothly execute ot 5 min read Operating Systems StructuresThe operating system can be implemented with the help of various structures. The structure of the OS depends mainly on how the various standard components of the operating system are interconnected and merge into the kernel. This article discusses a variety of operating system implementation structu 9 min read Booting and Dual Booting of Operating SystemWhen a computer or any other computing device is in a powerless state, its operating system remains stored in secondary storage like a hard disk or SSD. But, when the computer is started, the operating system must be present in the main memory or RAM of the system in order to perform all the functio 6 min read System CallA system call is a programmatic way in which a computer program requests a service from the kernel of the operating system on which it is executed. System Calls are,A way for programs to interact with the operating system. Provide the services of the operating system to the user programs.Only entry 9 min read Process & ThreadsIntroduction of Process ManagementProcess Management for a single tasking or batch processing system is easy as only one process is active at a time. With multiple processes (multiprogramming or multitasking) being active, the process management becomes complex as a CPU needs to be efficiently utilized by multiple processes. Multipl 8 min read Process Table and Process Control Block (PCB)While creating a process, the operating system performs several operations. To identify the processes, it assigns a process identification number (PID) to each process. As the operating system supports multi-programming, it needs to keep track of all the processes. For this task, the process control 6 min read Process Schedulers in Operating SystemA process is the instance of a computer program in execution. Scheduling is important in operating systems with multiprogramming as multiple processes might be eligible for running at a time. One of the key responsibilities of an Operating System (OS) is to decide which programs will execute on the 6 min read Context Switching in Operating SystemContext Switching in an operating system is a critical function that allows the CPU to efficiently manage multiple processes. By saving the state of a currently active process and loading the state of another, the system can handle various tasks simultaneously without losing progress. This switching 4 min read Thread in Operating SystemA thread is a single sequence stream within a process. Threads are also called lightweight processes as they possess some of the properties of processes. Each thread belongs to exactly one process.In an operating system that supports multithreading, the process can consist of many threads. But threa 7 min read CPU SchedulingCPU Scheduling in Operating SystemsCPU scheduling is a process used by the operating system to decide which task or process gets to use the CPU at a particular time. This is important because a CPU can only handle one task at a time, but there are usually many tasks that need to be processed. The following are different purposes of a 8 min read Preemptive and Non-Preemptive SchedulingIn operating systems, scheduling is the method by which processes are given access the CPU. Efficient scheduling is essential for optimal system performance and user experience. There are two primary types of CPU scheduling: preemptive and non-preemptive. Understanding the differences between preemp 4 min read Multiple-Processor Scheduling in Operating SystemIn multiple-processor scheduling multiple CPUs are available and hence Load Sharing becomes possible. However multiple processor scheduling is more complex as compared to single processor scheduling. In multiple processor scheduling, there are cases when the processors are identical i.e. HOMOGENEOUS 8 min read Thread SchedulingThere is a component in Java that basically decides which thread should execute or get a resource in the operating system. Scheduling of threads involves two boundary scheduling. Scheduling of user-level threads (ULT) to kernel-level threads (KLT) via lightweight process (LWP) by the application dev 7 min read DeadlockIntroduction of Deadlock in Operating SystemA deadlock is a situation where a set of processes is blocked because each process is holding a resource and waiting for another resource acquired by some other process. In this article, we will discuss deadlock, its necessary conditions, etc. in detail.Deadlock is a situation in computing where two 11 min read Banker's Algorithm in Operating SystemBanker's Algorithm is a resource allocation and deadlock avoidance algorithm used in operating systems. It ensures that a system remains in a safe state by carefully allocating resources to processes while avoiding unsafe states that could lead to deadlocks.The Banker's Algorithm is a smart way for 8 min read Wait For Graph Deadlock Detection in Distributed SystemDeadlocks are a fundamental problem in distributed systems. A process may request resources in any order and a process can request resources while holding others. A Deadlock is a situation where a set of processes are blocked as each process in a Distributed system is holding some resources and that 5 min read Deadlock Prevention And AvoidanceDeadlock prevention and avoidance are strategies used in computer systems to ensure that different processes can run smoothly without getting stuck waiting for each other forever. Think of it like a traffic system where cars (processes) must move through intersections (resources) without getting int 5 min read Deadlock Detection And RecoveryDeadlock Detection and Recovery is the mechanism of detecting and resolving deadlocks in an operating system. In operating systems, deadlock recovery is important to keep everything running smoothly. A deadlock occurs when two or more processes are blocked, waiting for each other to release the reso 6 min read Deadlock Ignorance in Operating SystemIn this article we will study in brief about what is Deadlock followed by Deadlock Ignorance in Operating System. What is Deadlock? If each process in the set of processes is waiting for an event that only another process in the set can cause it is actually referred as called Deadlock. In other word 5 min read Memory & Disk ManagementMemory Management in Operating SystemMemory is a hardware component that stores data, instructions and information temporarily or permanently for processing. It consists of an array of bytes or words, each with a unique address. Memory holds both input data and program instructions needed for the CPU to execute tasks.Memory works close 7 min read Fixed (or static) Partitioning in Operating SystemFixed partitioning, also known as static partitioning, is one of the earliest memory management techniques used in operating systems. In this method, the main memory is divided into a fixed number of partitions at system startup, and each partition is allocated to a process. These partitions remain 8 min read Variable (or Dynamic) Partitioning in Operating SystemIn operating systems, Memory Management is the function responsible for allocating and managing a computer’s main memory. The memory Management function keeps track of the status of each memory location, either allocated or free to ensure effective and efficient use of Primary Memory. Below are Memo 4 min read Paging in Operating SystemPaging is the process of moving parts of a program, called pages, from secondary storage (like a hard drive) into the main memory (RAM). The main idea behind paging is to break a program into smaller fixed-size blocks called pages.To keep track of where each page is stored in memory, the operating s 8 min read Segmentation in Operating SystemA process is divided into Segments. The chunks that a program is divided into which are not necessarily all of the exact sizes are called segments. Segmentation gives the user's view of the process which paging does not provide. Here the user's view is mapped to physical memory. Types of Segmentatio 4 min read Segmentation in Operating SystemA process is divided into Segments. The chunks that a program is divided into which are not necessarily all of the exact sizes are called segments. Segmentation gives the user's view of the process which paging does not provide. Here the user's view is mapped to physical memory. Types of Segmentatio 4 min read Page Replacement Algorithms in Operating SystemsIn an operating system that uses paging for memory management, a page replacement algorithm is needed to decide which page needs to be replaced when a new page comes in. Page replacement becomes necessary when a page fault occurs and no free page frames are in memory. in this article, we will discus 7 min read File Systems in Operating SystemA computer file is defined as a medium used for saving and managing data in the computer system. The data stored in the computer system is completely in digital format, although there can be various types of files that help us to store the data.File systems are a crucial part of any operating system 8 min read File Systems in Operating SystemA computer file is defined as a medium used for saving and managing data in the computer system. The data stored in the computer system is completely in digital format, although there can be various types of files that help us to store the data.File systems are a crucial part of any operating system 8 min read Advanced OSMultithreading in Operating SystemA thread is a path that is followed during a program’s execution. The majority of programs written nowadays run as a single thread. For example, a program is not capable of reading keystrokes while making drawings. These tasks cannot be executed by the program at the same time. This problem can be s 7 min read Compaction in Operating SystemCompaction is a technique to collect all the free memory present in the form of fragments into one large chunk of free memory, which can be used to run other processes. It does that by moving all the processes towards one end of the memory and all the available free space towards the other end of th 3 min read Belady's Anomaly in Page Replacement AlgorithmsBelady's Anomaly is a phenomenon in operating systems where increasing the number of page frames in memory leads to an increase in the number of page faults for certain page replacement algorithms. Normally, as more page frames are available, the operating system has more flexibility to keep the nec 11 min read Techniques to handle ThrashingPrerequisite - Virtual Memory Thrashing is a condition or a situation when the system is spending a major portion of its time servicing the page faults, but the actual processing done is very negligible. Causes of thrashing:High degree of multiprogramming.Lack of frames.Page replacement policy.Thras 6 min read Free Space Management in Operating SystemFree space management is a critical aspect of operating systems as it involves managing the available storage space on the hard disk or other secondary storage devices. The operating system uses various techniques to manage free space and optimize the use of storage devices. Here are some of the com 7 min read RAID (Redundant Arrays of Independent Disks)RAID (Redundant Arrays of Independent Disks) is a technique that makes use of a combination of multiple disks for storing the data instead of using a single disk for increased performance, data redundancy, or to protect data in the case of a drive failure. The term was defined by David Patterson, Ga 15 min read PracticeLast Minute Notes – Operating SystemsAn Operating System (OS) is a system software that manages computer hardware, software resources, and provides common services for computer programs. It acts as an interface between the user and the computer hardware.Table of Content Types of Operating System (OS): ThreadsProcessCPU Scheduling Algor 15+ min read Operating System Interview QuestionsAn operating system acts as a GUI between the user and the computer system. In other words, an OS acts as an intermediary between the user and the computer hardware, managing resources such as memory, processing power, and input/output operations. Here some examples of popular operating systems incl 15+ min read Operating Systems - GATE CSE Previous Year QuestionsThe Operating System(OS) subject has high importance in GATE CSE exam because:large number of questions nearly 10-12% of the total asked significant weightage (9-11 marks) across multiple years which can also be seen in the below given table:YearApprox. Marks from OSNumber of QuestionsDifficulty Lev 2 min read Like