mixing


Also found in: Dictionary, Medical, Acronyms, Idioms, Encyclopedia, Wikipedia.
Related to mixing: thesaurus
Graphic Thesaurus  🔍
Display ON
Animation ON
Legend
Synonym
Antonym
Related
  • noun

Synonyms for mixing

Based on WordNet 3.0, Farlex clipart collection. © 2003-2012 Princeton University, Farlex Inc.
References in periodicals archive ?
The new hard coatings have a more uniform micro structure that has the potential to extend the usable life of the mixing chamber.
High- and low-pressure RTM metering/ mixing equipment and clamps, RIM and large LD-SRIM systems.
By making some changes in the process of taking impressions as described here, with improved tray design and a different type of impression material and mixing system we can achieve several desirable goals:
At higher velocity ratios, when the flow is turbulent, mixing is significantly affected by the velocity ratio, but there is no clear indication that mixing is affected by the stock consistency.
There are numerous variables that must be considered when establishing the mixing time, including mixer el]3ciency, batch size, resin viscosity and cycle time requirements.
A better understanding of mixing would benefit many industries, Muzzio says.
The mixer and the post-mixer forming device can be referred to as the mixing system.
Single- and double-acting systems feature no-purge static mixing or disposable dynamic mixing, which eliminates solvent flushing.
* finer AFS/GFN sands have higher surface areas requiring longer mixing;
Repeated over and over in localized spots, Egbert says, this mixing might be enough to lighten and warm all that cold, deep water flowing along the Atlantic's conveyor belt from the poles back toward the equator.
Today's systems now data-log not only the parameters associated with the proportioning of ingredients and the mixing cycle, but can also monitor and record operator response times--reaction to prompts.
Model 350 multipurpose blender for continuous mixing of dry materials features two concentrically mounted augers that operate at different speeds.
High-intensity vacuum mixing and cooling can help green sand metalcasters improve molding sand and casting quality while operating more efficiently and cost-effectively.
However, there exists no widely accepted theory that describes the mixing of solid particles, and industrial engineers generally can't determine in advance the effectiveness of any given process for mixing granular solids.
Both the Banbury mixer and the Intermix have acquired an excellent reputation as being rugged and effective compounding devices, providing years of service for mixing a broad range of both rubber and plastics compounds.