Everand Logo

Welcome to Everand!

  • Discover millions of ebooks, audiobooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    Introduction to Nanoscience and Nanotechnology
    Introduction to Nanoscience and Nanotechnology
    Introduction to Nanoscience and Nanotechnology
    Ebook195 pages1 hour

    Introduction to Nanoscience and Nanotechnology

    By Venugopal P. Reddy and Lakshmi M.

    ()

    Read preview

    About this ebook

    Although several books on nanoscience and nanotechnology are available in the market, most of them deal with the research-level areas, whereas a few of them deal with the fundamentals of the subject. However, every effort is made by the authors of this book to cover all the topics needed for a beginner. Some of the important topics covered in this book are preparation, properties along with the applications of the materials. Nanotechnology is a multidisciplinary subject representing the convergence of various subjects. Therefore, explaining the subject is a big task and needs a proper approach so that the students may not be distracted. The book also provides a strong conceptual foundation of fundamentals of nanoscience and Nanotechnology upon which the engineering and technological applications are built.
    Contents:
     
    1.    Basics of Nanoscience
    2.    Nanostructures
    3.    Classification & Surface to Volume Ratio in Nanomaterials
    4.    Synthesis of Nanomaterials
    5.    Characterization Techniques
    6.    Properties of Nanomaterials
    7.    Applications of Nanomaterials
    8.    Nanoscale Devices
    9.    Concerns and Challenges of Nanotechnology
    LanguageEnglish
    PublisherBSP BOOKS
    Release dateJun 30, 2023
    ISBN9789395038102
    Introduction to Nanoscience and Nanotechnology

    Related to Introduction to Nanoscience and Nanotechnology

    Related ebooks

    Technology & Engineering For You

    View More
    View More

    Related podcast episodes

    Related categories

    Reviews for Introduction to Nanoscience and Nanotechnology

    0 ratings

    0 ratings0 reviews

    What did you think?

    Tap to rate

    Review must be at least 10 words

      Book preview

      Introduction to Nanoscience and Nanotechnology - Venugopal P. Reddy

      Chapter 1

      Basics of Nanoscience

      1.0 Basic Definitions

      1.1 Definition of Nano

      Nano comes from the Greek word nanos, meaning dwarf, but nano is infinitely smaller than a dwarf. Nano means 10-9. Nanometer is one billionth of a meter (i.e. 1nm= 10-9 m). Some examples are given in the following figure to understand how small the nano dimension is 1centimeter = 10-2m, 1 millimeter = 10-3m, 1 micrometer = 10-6m and 1 nanometer = 10-9m.

      img63499448befe

      Fig. 1.1 Sequence of images showing various levels of scale

      1.2 Nanoscale

      Nanometer is the scale used to measure objects in the nanoworld. In general, the scale ranges from 1nm to 100nm is known as Nanoscale. It is appropriate and relevant to make a mention of the diameter of an atom. As the size of an atom is less than even 1 nanometer, we discuss the next scale on the lower side and is Angstroms (Å) scale. We are aware that atoms are extremely small and the diameter of the atoms is measured in Angstroms (Å). Thus, 1Angstrom (Å) = 0.1 nm. For example the diameter of a hydrogen atom is 0.1 nm. If one lines up 10 hydrogen-atoms next to each other in a row, the resulting length would be approximately 1 nm.

      img8771f0c91f7c

      Fig. 1.2 Ten hydrogen atoms in a row make 1 nm

      To put this scale in perspective, Trying to find a nanoparticle on the surface of a soccer ball is just as difficult as finding a soccer ball on the surface of the Earth.

      img1653c82431d8

      Fig. 1.3 Nanoparticle compared in size with a soccer ball, and soccer ball is compared with Earth (figure by Michael Hochella https://serc.carleton.edu/details/images/180059.html)

      1.3 Nanomaterials

      The material whose crystallite size lies in the nano range (1nm to 100nm) is called nanomaterial. The properties of the material at the nano scale (Nanomaterial) are totally different from those of the same material at the higher scale (Bulk material). It means that most of elements of the periodic table exhibit totally different behavior when they are in the nanoscale. For example, although the gold is chemically inert in its bulk state, in the nano state, however, exhibits excellent catalytic activity. Similarly, bulk silver is non-toxic, whereas nano-silver is capable of killing viruses. Further, Titanium dioxide, a white pigment used in sun screens, becomes transparent in the nanoscale, while aluminum oxide, commonly used for teeth fillings, becomes explosive in the nanoscale. Finally, one may conclude that Nanomaterials exhibit improved properties such as strength, hardness, ductility (in brittle materials), wear - resistance, corrosion – resistance, erosion resistance, improved chemical activity etc., Moreover, as classical mechanics fails to explain the unusual behavior (movement, energy, etc) of the nanomaterials, quantum mechanics, however, is successful in doing so.

      1.4 Nanoscience

      The science dealing with all types of nano materials including nanoparticles, nanostructures and their unique properties is defined as Nano science.

      Nanoscience is the cutting edge of science and is highly multidisciplinary. It draws from diverse fields such as physics, chemistry, materials science, microelectronics, biochemistry, Engineering and biotechnology etc.

      img2bad1803a2d7

      Fig. 1.4 Nanoscience is a multidisciplinary subject

      1.5 Nanotechnology

      The technology involving the manipulation of nano materials to build variety of structures is defined as nano technology. Although Nano technology is still at its infant stages, the nano products are having far reaching applications and are going to change the lives of mankind. Nanotechnology helps in the design, characterization, production and application of structures, devices and systems by controlling size and shape at the nanometer scale (1–100 nm). Nanotechnology is very much useful in creating these novel materials and devices with enhanced properties and potential.

      In recent years nanotechnology has become highly popular. This is partly because of the interest in miniaturization of devices. Scientists have also been amazed due to the extraordinary properties of these novel materials. In fact, these materials open a new avenue in the field of material science due to their novel properties and wide range of applications in various fields such as Electronics and communications, Textile industry, Automobiles, Sensors, Cosmetics and Medicine etc.

      1.6 General Introduction

      Nanomaterials open a new avenue in the field of material science. The nanomaterials have been the focus of intense research recently because of their novel properties at the nanoscale. Nanotechnology is a field of applied science concerned with the control of matter at dimensions of roughly 1 to 100 nanometers (nm). Nanotechnology is a new and expanding technology, its main applications are the development of innovative methods to fabricate new products, to formulate new chemicals, materials and efficient use of raw materials. Nanotechnology is also meant for replacing the recent era of equipment with better performance ones. This will help in the reduction of consumption of energy and material and lowered damage to the environment, as well contributing to the environmental remediation [1]. The widest use of nanomaterials has been as tumor-targeted drug delivery systems, contrast enhancers for magnetic resonance imaging, biosensors and biomedicine, etc.

      Nanomaterials are already in commercial use. The range of commercial products available today is very broad, including sunscreens and cosmetics, paints, UV-blocking coatings, self - cleaning windows, fuel cells, batteries, fuel additives, lubricants, catalysts, stain-resistant and wrinkle-free textiles, transistors, lasers and lighting, integrated circuitry, sports equipment, bicycles and automobiles, medical implants, water purifying agents, disinfectants, food additives etc.

      In order to design nanomaterials and nanodevices for the next generation, it is requisite to understand their intrinsic features. Several researchers are working throughout the world towards the development of nanomaterials that are intended to perform more complex and efficient tasks. Thus, the development of completely new technologies and nanomaterials with desirable functional properties may lead to a generation of new products that will enhance the quality of the living environment in the near future.

      img4f93701047ab

      Fig. 1.5 Applications of Nanomaterials [1]

      1.7 History of Nanotechnology

      The origin of the term ‘Nano’ is traced to a Greek root which means dwarf (very small). On the length scale, nano is one billionth of a meter. The word Nanotechnology is relatively new, but the existence of nanostructures and nanomaterials is not new. Such structures have existed on Earth as long as life itself. Nanomaterials have been used by human beings for centuries without knowing the dimensions of the materials they used. The first known use dates back to 4th century A.D. Roman glass makers have prepared glasses containing nanosized metals. The Lycurgus cup is an outstanding example of this. It appears green in the reflected light and deep red in transmitted light. This cup is made from soda lime glass containing silver and gold nanoparticles inside it. The glass is found to contain 70 nm particles when seen through the transmission electron microscope (TEM). Nanotechnology is easily evident in various old churches. The beautiful colors on window glasses of medieval churches are due to the presence of metal nanoparticles in the glass materials. These vivid colors were controlled by the size and the shape of the nanoparticles of gold and silver.

      img29f398ff71ec

      Fig. 1.6 Photographs of the famous Lycurgus cup which displays a different color in reflected and transmitted light. [Courtesy of the British Museum, London]

      img315f52af0f10

      Fig. 1.7 Rosacenord stained glass in the Cathédrale Notre-Dame de Chartres (France),color changes depend on the size and shape of gold and silver nanoparticle. [2]

      The Damascus swords were prepared in Damascus, the capital city of Syria, during 900 AD to 1750 AD. Damascus steel is a kind of alloy. With this alloy sharp, flexible and hard swords were manufactured. They were famous for their strength and sharpness. It is said that the blade of Damascus sword is very strong and even when it falls on the ground retains its original sharpness. In fact, this sword was used for cutting not only wood but also metal or even stone.

      img84c3835b1669

      Fig. 1.8 Damascus sword [3]

      What gave the sword its uniqueness? The secret of the sword remained unknown until recently. Very recently, high resolution electron microscopy of blades used in the Damascus sword showed that the blade contains carbon nanotubes (CNTs) [3]. Therefore, now people also strongly believe that the existence of carbon nanotubes (CNTs) in the material is the main reason for the high strength of these steels.

      A medical Doctor / practioner Francisci Antonii published the first book on colloidal gold. It contains a detailed description of the formation of colloidal gold and covers its various medical applications. The book noted the presence of soluble gold around fifth or fourth century B.C. in Egypt and China.

      The field of black and white photography was started in the 18th century. The photographic film is an emulsion consisting of silver nanoparticles in gelatin.

      The first preparation of nanoparticles in the laboratory was carried out by Michael Faraday as early as 1857 [4]. He recognized that the colour was due to the small size of the colloids and published a paper explaining how metal particles affect the colour of church windows. The gold particles prepared by Faraday are still preserved in the Royal Institution of London.

      imgce228401f3ac

      Fig. 1.9 A display of Michael Faraday’s colloidal solutions of gold

      Enjoying the preview?
      Page 1 of 1