How to Install Automotive Interior Kits

PREFACE

WHAT IS A KIT INTERIOR?

As an auto trim specialist, I began my career by making my own seat covers and door panels because there were only a few seat cover sets available, and they were not made very well. If you ask anyone who has purchased and installed a prefabricated interior what they thought of the fit and finish, most would say that they would never buy one again. Why? It’s because the individual components of a reproduction kit do not fit as well as the original covers and panels that came from the original manufacturer.

The seat covers have many issues with the materials that are used and the actual tailoring of the seat cover. Patterns used in manufacturing vary greatly among manufacturers, and the fitment is not standard for the different models that are offered. Another problem with so many of the upholstery products offered is the poor quality of the materials.

Not all of these reproductions are as accurate as they could be. Some seat covers fit better than others, as with door panels and other interior pieces. There are also issues with the embossed patterns on the panels. Some are sharp and clear, while others have been known to lift from the backing material. A few manufacturers use their own version of the original-style patterns, and what they produce does not fit as well as it could. Some of the material choices used in the manufacturing process are not the correct factory grain or color and are not as durable as they should be.

Until now, it was the opinion of others that swayed the buyer on what to purchase and where to purchase the new materials for their project. These opinions were often harsh and unjustified for many reasons. What I have found is that a majority of the aftermarket products were just poorly installed, which is no fault of the maker. Problems encountered with a product should be discussed with the manufacturer without making a disparaging post online.

So, what are the best products to use and where do you get them? Well, I just do not have a good answer for that. There are too many variables, and there are no guarantees on the results you will get upon installation of a premanufactured interior component. I have installed many different products supplied to me by my customers and have made them work. I know firsthand that there can be problems with mail-order items.

There are many reasons why a car owner would buy a reproduction interior product. One reason is because they are much easier for restoring a car and less costly to obtain than to have an interior made from scratch by a professional auto upholsterer. Another reason is because many interiors have complex embossed patterns in the vinyl panels that cannot be replicated by sewing the design into the upholstery. The biggest factor is that many restorations are performed because of the love of the car, and the owner wants to do as much hands-on work as possible. Unfortunately, most restorers do not have all the skills or knowledge that they wish they had.

Installer Error

A lot of misinformation has been dumped on prefabricated kit interiors and their manufacturers for many years, which gave them a bad reputation.

The common problem with prefabricated interior kits is that most people do not know how to install them correctly. There are a lot of little tricks to get the cover to fit well and look good. As a trimmer, it has always been my job to install interior components wrinkle-free and have them look as if they were originally installed at the factory. I will show you how to get the best fit and finish on a kit interior with the least amount of trouble.

My aim is to provide you with the confidence to install a prefabricated interior, tips to overcome some of the most basic installation problems, and knowledge to help you complete your project with exceptional results.

CHAPTER 1

MANUFACTURERS

Many independent manufacturers of restoration interiors and classic car parts go into the business because of their personal love of the automobile. Most of these individuals found that there just were too few new old stock (NOS) parts available to repair their prize car. This gave them the initiative to create new parts that were missing from the marketplace.

These innovators grew businesses that have made the automobile restoration hobby stronger, better, and safer. Over the years, the premade and restoration market has improved its capabilities and is now capable of making exact replicas of the factory original components. The seat covers and door panels are tailored to fit and look as good as or better than the originals. Hard-to-find pieces are also available due to the demand for high-quality parts that would otherwise not be obtainable.

Auto Custom Carpet

When looking for automotive floor coverings, Auto Custom Carpet (ACC) is by far the leading provider of OEM-style carpet. It has a rich history and has grown by acquiring other companies from 1977 to the company that it is today. It employs over 150 workers in Alabama and Georgia.

Carpet sets can be made from seven of the original carpet materials used by the manufacturer in many color choices with different padding options. ACC also produces custom floor mats that can be embroidered with more than 230 licensed logos. Vinyl flooring and trunk liners are also offered in different patterns to fit your car.

All of these labels were removed from premade seat covers that had manufacturing or fitment issues. When I custom tailor the seat cover to fit correctly, I remove the identification tag because it is no longer an original reproduction from that manufacturer.

A true leader in automotive flooring, Auto Custom Carpets offers over 40,000 flooring applications for vehicles built from the 1940s to present day. Original-style carpet and accessories are made to order in hundreds of color options and embroidered logos to complement your project. (Photo Courtesy Auto Custom Carpet)

Cars Inc.

Some of the most popular cars being restored today are the Tri-Five Chevys. One source for authentic parts and reproduction interior pieces is Cars Inc. The company’s facility is located in Rochester Hills, Michigan, which is a northern suburb of Detroit.

From its beginning in 1976, the business evolved by collecting NOS parts from local Chevy dealership shelves, taking the rare parts to auto swap meets, and reselling them to other car enthusiasts who were desperate to get their hands on these much-needed pieces. As requests for replacement panels grew, Cars Inc. began making its own replacement panels and interiors to sell.

Over the years, Cars Inc. has grown into an over-65,000-square-foot facility that produces and sells more than 30,000 different restoration parts for the classic Chevy market.

Ciadella Interiors

Who knew that a man with a love for old Chevys would become the innovator of premade interiors for some of the most sought-after cars in the world? When you hear someone needing an interior for a Tri-Five Chevy you must automatically think of Pete Ciadella.

After re-establishing itself in 2009, Ciadella Interiors now operates in a facility in Tempe, Arizona. Some of his original craftsmen have over 25 years of dedicated service in making original and custom interiors for your classic Chevy. Seat covers, door panels, and trim pieces are all made from original patterns with exact reproductions of the original fabrics and vinyl to bring your interior back to life.

Distinctive Industries

One of the oldest manufacturers of prefabricated interiors for American muscle cars emerged out of Santa Monica, California, in 1969. Distinctive Industries began as a trim shop that made OEM seat covers and door panels for many of the favorite models at that time.

Distinctive Industries started making replacement interior components in 1969 from a small auto upholstery shop in Santa Monica. Today, it has expanded to create OEM seat covers and door panels for some of the most popular collector cars in the country. (Photo Courtesy Distinctive Industries)

Cars Inc. has been providing performance and high-quality restoration parts for Tri-Five and classic Chevys for more than 43 years. Authentic handcrafted seat covers, door panels, and full interiors components are made by skilled craftsmen in house at the facility in Rochester Hills, Michigan. (Photo Courtesy Cars Inc.)

Pete Ciadella was best known for his passion with the Tri-Five Chevys. As one of the first in the industry to produce ready-made restoration seat covers and door panels, Pete worked with original patterns and grew his business by making some of the finest handcrafted original and custom Chevy interior pieces available. (Photo Courtesy Ciadella Interiors)

Continued growth and expansion led to innovations that are used today. These replica interiors are produced with digital cutting machines, and they are sewn to equal the originals in detail by matching techniques and materials that satisfy the needs of today’s hobbyists. Additional patterns and products are being developed all the time to meet the needs of the auto enthusiast.

Legendary Auto Interiors is based in New York and has grown to be the premier maker of classic Chrysler and Dodge interior upholstery in the industry. It also offers a wide selection of GM and AMC interior pieces and produces a line of custom rubber floor mats. (Photo Courtesy Legendary Auto Interiors)

For more than 100 years, Metro Moulded Parts Inc. has made some of the best automotive rubber products you can get from its manufacturing facility in Minnesota. Its Metro SuperSoft brand keeps the weather out and will last years longer than other foreign-made hard rubber products. (Photo Courtesy Metro Moulded Parts Inc.)

You can see all of the products available by visiting the online catalog located on the Distinctive Industries website. To obtain authentic Ford and GM interior components for your project, you will need to purchase them through one of Distinctive Industries’ many distributors.

Legendary Auto Interiors

From a modest beginning in 1979, the vision to fill the needs of auto enthusiasts has evolved and grown from producing Mustang, Chevelle, and Camaro interiors to an empire that produces some of the most sought-after restoration interiors in America.

The primary focus of the business changed to creating Mopar soft trim products in 1984. By recognizing the demand for Chrysler, Dodge, and Plymouth interiors, Legendary added more full-time employees to meet the requests of customers.

By the early 1990s, a new facility was constructed, and Legendary Interiors expanded its product line to include more models and options. The television and movie industries began to use Legendary Interiors in their productions because they recognized a need for authentic restoration interiors.

Metro Moulded Parts Inc.

The Hutchinson Rubber Company began as an auto innertube manufacturer in 1918. At the beginning of World War II, founder John Hajicek began to make rubber parts for the military. When the war ended, the company moved to Minneapolis to make custom-molded intricate industrial parts.

John’s son, Donald Hajicek, started the restoration of an L29 Cord in 1962, only to discover that restoration parts for classic cars other than Fords were hard to come by. Donald took it upon himself to make molds and create the parts he needed for his restoration and began advertising the parts in Hemmings Motor News. The response from customers was overwhelming with requests for more items. Accepting the challenge, the company grew into the modern manufacturing facility it is today.

Since 1977, Parts Unlimited Inc. has supplied quality interior pieces at the fairest cost to the consumer. Seat covers and foam, door panels, headliners, sun visors, and window sweeps are all made available from its facility in Kentucky for you to restore your classic car or truck. (Photo Courtesy Parts Unlimited)

Most people do not think about all those rubber bumpers used to cushion glove box doors or seat backrests. Being able to keep the weather out is why a quality convertible top roof rail set is a reason to visit Metro Moulded Parts Inc.

PUI Interiors

A leader in the automotive restoration parts industry, Parts Unlimited Inc. Interiors (PUI) began producing interior components in 1977. Located in La Grange, Kentucky, PUI Interiors creates an extensive collection of authentic reproduction seat covers, door panels, and headliners.

With in-house manufacturing capabilities and vast experience, PUI Interiors has been able to offer restoration products to the automotive hobbyist at modest prices, while maintaining quality control. Because PUI Interiors is committed to the industry, it stands behind its products, and that is what makes it a great company.

Trim Parts

When it comes to obtaining the highest quality restoration parts for your project, consider the items available from Trim Parts. What makes the products from Trim Parts better is that the company is licensed to manufacture authentic reproductions of GM and Mopar parts. This means you are getting a new part that meets or exceeds the original manufacturers specifications.

All the detail of cast emblems, door handles, and other interior pieces are going to fit and perform just like the originals. These parts are made with pride in America and usually cost less than the Chinese knockoffs that do not perform like you would like them to.

Putting your car back together with parts that look nice and perform well is the key to a great restoration. Trim Parts has been reproducing authentic emblems, sill plates, lenses, and more for over 40 years. Everyone knows that when it comes to quality, it’s all in the fine details. (Photo Courtesy Trim Parts)

CHAPTER 2

PARTS AND ACCESSORIES

Many car enthusiasts begin their search for replacement parts and accessories by combing the local swap meets and junkyards. These sources are not very convenient and do not always have the pieces you need. If and when you find that rare gem that you desperately need, it is usually not in the best condition to install on your car. And so, the search continues.

Box Houses

Before the internet dominated the marketplace, there were the go-to catalog sources to order parts. Fingerhut and JC Whitney pioneered and once ruled the mail-order business for automotive products. These companies sent out catalogues that offered auto parts and accessories that you just could not get at your local auto parts store. Innovation and customer feedback helped propel the mail-order business into the industry it is today.

Searching for parts at a swap meet is not only a challenge but it is also a great way to enjoy an afternoon. You can pick up some real bargains, but you need a lot of patience and must be willing to devote a lot of time to find the parts you really need.

Protective seat covers are stylish and very practical. Fingerhut started its business by providing these low-cost seat covers to motorists to preserve the upholstery in their new cars. The slip-on design made the cover an easy-to-install project for the consumer.

Fingerhut

The Fingerhut empire got its start in 1948 by selling automobile seat covers out of a Minneapolis garage run by William Fingerhut. William’s family’s sewing business produced the slip-over seat covers that were, in turn, sold to his brother, Manny, who was the manager at a used car lot. The seat covers were designed for the protection and preservation of the upholstery in the car. The Fingerhut brothers and their employees had annual gross sales of nearly $100,000 in their first few years in business.

After working the local car dealer market, they sold thousands of their seat covers all over the country. This eventually led to the expansion of Fingerhut into a major mail-order catalog company that sells everything from household goods to power tools.

JC Whitney

For a company that started business as a scrap metal yard, JC Whitney grew a catalog business built on hard parts. Founded by Israel Warshawsky, the car parts mogul began with small advertisements in the classified sections of Popular Mechanics and Popular Science magazines. The 1950s and 1960s showed great expansion of the company as the JC Whitney catalog provided low-cost parts to budget-minded enthusiasts to keep their hot rods on the road.

As the parts industry changed, companies like eBay and Amazon began to dominate the marketplace. Roy, Israel’s son who took over the company from his father, retired from JC Whitney in 1991 and died in 1997. The business was sold to Riverside Company in 2002. Eventually the name of JC Whitney was used as a storefront for the new owner, US Auto Parts.

Modern Box Houses

Today, anyone with an internet connection or cell phone can order just about any part necessary to complement his or her project. The unfortunate reality of this scenario is that box houses do not always have what you need, and they do not always speak the same language as you.

By this, I mean that you are a dedicated car enthusiast, and they are just there to take an order. They do not always have the time to get all the facts, and some vendors do not care if the parts you order will be compatible with the car you are restoring. It is your responsibility to know as much as you can about the car you are working on. To avoid lost time and aggravation from returning parts that are wrong for your car, you must know exactly what you need and how the part will work with the car you have.

Unfortunately, the box houses do not have everything necessary to complete your project. Every project will require some necessary parts and items that are not available through an online supplier, but they can often be obtained from an upholstery supplier.

For many years, JC Whitney has published catalogs filled with thousands of parts and accessories for the repair and restoration of motor vehicles. Although the printed catalogs are no longer being distributed, you can still view and order from its online catalog.

In the old days, if you needed parts or accessories, you would visit the local auto parts store or place an order from a mail-order catalog. Today all you need is a computer or smart phone to browse and order the items you need for your project.

Setting Up an Account

Before you place an order for any restoration parts, you need to know the year, make, model, and bodystyle of the vehicle. To gain an advantage with any vendor, create an account with them. The benefits of establishing an account will help you check out faster and track the status of your orders. Other perks that vendors extend to registered buyers are discounts and special email offers.

Ordering parts online is much easier when you have an account with the vendor. The application process takes only a few minutes and can save you time and money when you opt in for email specials. Always verify that you are on a secure page when entering your personal information.

The registration process typically consists of submitting your name, address, email, and the make and model of the car on which you are working. This information helps the vendor process your order and flags mis-ordered items by verifying that the products you ordered will fit your project.

Placing an Order

To save time, make a list of the items you need by searching the pages of the vendor catalog and browsing the website. With your list in hand, there are a few ways to order the parts. Many customers feel comfortable filling out the online form and submitting an order. This may be the simplest way to get a part or two, but if you have questions or any special requests, it may be to your benefit to call the vendor. If you are not sure if a piece will fit or you need to know if it is in stock, the operator will be able to assist you. You can also ask if the vendor has parts you need that may not be listed.

Placing an order can be as simple as making a phone call. If you are internet savvy, just click the Add to Cart button, and your parts are on their way. If you are old school, use the order form from the back of the vendor catalog. Just fill in the blanks, put a stamp on the envelope, and mail it in.

There are three major shipping services available to deliver your parts: United Parcel Service (UPS), Federal Express (FedEx), and the United States Postal Service (USPS). The cost will vary among them, but any one of these carriers will deliver a package to your front door.

Shipping Charges

One of the necessary evils of ordering items is shipping charges. Some vendors may offer free shipping on orders, which can save you a lot of money, so do not be alarmed to find out that shipping can get expensive.

Shipping is calculated by the size of the package and not necessarily by weight. Large items, such as seat foam, can weigh almost nothing. However, the cost to get it to your door can be almost as much as the item itself. Determining the actual cost of shipping can only be done after the item is packaged for delivery. Be aware that some box houses will assess shipping costs based on the price of an item. This can result in you overpaying to have the product shipped.

The best way to get your items shipped for less is for the seller to combine items together and send them in one box. This can save you a lot of money, but you have to ask them to do it. Also ask for the cost of United States Postal Service (USPS) over UPS and FedEx.

Other Charges

You can expect additional costs on a shipped package for handling, insurance, COD (cash on demand), and drop shipments. These charges are not standard and can be added to an order at the vendor’s discretion for preparing a package. It is always a good practice to ask the vendor what the actual shipping costs will be before you finalize your order.

How to Pay

When shopping online, the items are placed in a virtual shopping cart. The cart will allow you to make changes by adding or deleting items. You can also enter any discount codes you may have and make corrections to your shipping information.

To complete the purchase, the vendor will ask you for a major credit card or PayPal account to pay for the products you ordered. Check your browser to make sure that it is on a secure page before you enter any personal or financial information. If you are not comfortable with entering your card information online, you can place your order by calling the vendor over the phone.

All your parts will need to be prepaid with a major credit card before the vendor will fill the order. Some vendors also accept other types of payment, such as personal checks or cash on delivery (COD). These orders may have restrictions or additional charges depending on the payment method.

Returns or Exchanges

No one enjoys the process of returning an unwanted or defective part. The best way to avoid a return is to order the correct parts the first time. Although this is not always going to happen, knowing how to return or exchange a product will make the experience go smoother.

To correct a problem transaction, you must first understand the vendor’s return policies. Do not assume that the vendor will just give you your money back; it is your responsibility to read and understand these procedures before you make an order for parts. It may also be your responsibility to pay the return shipping charges on an item.

When you need to return a part for any reason, it is best to contact the customer service department and ask for a return merchandise authorization (RMA) number and instructions on how to package and ship the part to them for a credit. Most vendors will not accept a package without prior authorization. Also when returning a package, request a tracking number to be assigned to the parcel. This number will allow you to follow the package’s shipment and know when it arrives at the vendor.

After you have given your order number and reason for a return to customer service, the representative will assign a return merchandise authorization number (RMA) to your account. This number should be written on the outside of the box and on a copy of the invoice placed inside the box.

Be Polite

The old saying of You can catch more flies with honey than with vinegar applies when requesting a return. Your attitude alone will make the process easier.

Speak calmly and respectfully when talking to the customer service representative, and above all, refrain from cussing and using bad language. I cannot express this point strongly enough. Be nice to the person on the other end of the phone. The customer service representative is just doing his or her job and wants to help you. You are not the only customer with which the customer service representative has dealt, and if you become upset and act rude toward him or her, you may not get the