Vultee Aircraft

The Vultee Aircraft Corporation became an independent company in 1939 in Los Angeles County, California. It had limited success before merging with the Consolidated Aircraft Corporation in 1943, to form the Consolidated Vultee Aircraft Corporation − or Convair.

History

Gerard "Jerry" Freebairn Vultee (1900–1938) and Vance Breese (1904–1973) started the Airplane Development Corporation in early 1932 after American Airlines showed great interest in their six-passenger V-1 design. Soon after, Errett Lobban (E.L.) Cord bought all 500 shares of stock in the company and the Airplane Development Corporation became a Cord subsidiary.

AVCO subsidiary

Due to the Air Mail Act of 1934, AVCO established the Aviation Manufacturing Corporation (AMC) on November 30, 1934 through the acquisition of Cord's holdings, including Vultee's Airplane Development Corporation. AMC was liquidated on January 1, 1936 and Vultee Aircraft Division was formed as an autonomous subsidiary of AVCO.

Jerry Vultee was named vice president and chief engineer. Vultee acquired the assets of the defunct AMC, including Lycoming Engines and Stinson Aircraft Company.

Vultee P-66 Vanguard

The Vultee P-66 Vanguard was a United States Army Air Forces fighter aircraft. It was initially ordered by Sweden, but by the time the aircraft were ready for delivery in 1941, the United States would not allow them to be exported, designating them as P-66s and retaining them for defensive and training purposes. Eventually, a large number were sent to China where they were pressed into service as combat aircraft with indifferent results.

Design and development

The Vultee Vanguard was the product of an idea conceived in the late 1930s by the Vultee Aircraft Division of the Aviation Manufacturing Corporation of developing four aircraft designed for different roles from a set of common wings and aft fuselage and tail assemblies. The company assigned four model designations: V-48 to a single-seat fighter, BC-51 to a basic combat trainer, B-54 to an advanced trainer, and BC-54D as a basic trainer. Eventually, the BC-51 would become the Army Air Corps BC-3 and the BC-54D, the BT-13.

Vultee XA-41

The Vultee XA-41 was originally ordered as a dive bomber. After combat experience led the Army Air Corps to believe dive-bombers were too vulnerable to enemy fighters, the contract was amended to change the role to low-level ground attack. Although the XA-41 was a potent weapons system, the design was overtaken by more advanced technology, and never entered production.

Design and development

The Vultee engineering team decided early in the design process to build the XA-41 (company Model 90) around the 3,000 hp Pratt & Whitney R-4360 Wasp Major four-row, 28-cylinder radial engine. The Model 90's large wing resembled that of Vultee Model 72 – a two-seat attack aircraft/dive bomber better known as the Vultee Vengeance (A-31/A-35) – including a straight leading edge, forward-tapered trailing edge and pronounced dihedral on the outer wing panels.

Designed to carry both a large internal load and external stores, the XA-41 was large for a single-engine aircraft. The single-place cockpit, set in line with the wing root, was 15 ft (4.6 m) off the ground when the airplane was parked.