Slip-on shoe

Slip-ons are typically low, lace-less shoes. The style most commonly seen, known as a loafer or slippers in American culture, has a moccasin construction. One of the first designs was introduced in London by Wildsmith Shoes, called the Wildsmith Loafer. They began as casual shoes, but have increased in popularity to the point of being worn in America with city lounge suits. Another design was introduced as Aurlandskoen (the Aurland Shoe) in Norway (early 20th century). They are worn in many situations in a variety of colours and designs, often featuring tassels on the front, or metal decorations (the 'Gucci' loafer).

A less casual, earlier type of slip-on is made with side gussets (sometimes called a dress loafer). Made in the same shape as lace-up Oxfords, but lacking the laces, these shoes have elasticated inserts on the side which allow the shoe to be easily removed but remain snug when worn. This cut has its greatest popularity in Britain.

Loafers

History

A bespoke shoe company based in London that was established in 1847 developed the first loafer as a country house shoe for the landed gentry and the royal family. The "Wildsmith Loafer" made by Raymond Lewis Wildsmith of Wildsmith Shoes, was designed for King George VI as a casual house shoe. The shoe has subsequently been marketed and sold by other London shoe firms and dubbed "the Harrow".

Slip

Slip or SLIP may refer to:

In science and technology

Relating to movement of physical matter

Slip (telecommunication)

In telecommunications, a slip is a positional displacement in a sequence of transmitted symbols that causes the loss or insertion of one or more symbols. Slips are usually caused by inadequate synchronization of the two clocks controlling the transmission or by poor reception of the signal.

References

Slip (ceramics)

A slip is a suspension in water of clay and/or other materials used in the production of ceramic ware.Deflocculant, such as sodium silicate, can be added to the slip to disperse the raw material particles. This allows a higher solids content to be used, or allows a fluid slip to be produced with the a minimum of water so that drying shrinkage is minimised, which is important during slipcasting. Usually the mixing of slip is undertaken in a blunger although it can be done using other types of mixers or even by hand.

An engobe is a material similar to a slip, with somewhat lower clay content, higher proportion of flux, and added filler, and in some cases a colorant.

Use

A slip may be made for various purposes in the production and decoration of ceramics. Slip can be used: