Sim is the third album by Brazilian singer-songwriter Vanessa da Mata, released on May 28, 2007 by Sony BMG. It was partially recorded at Kingston, Jamaica with musicians Sly & Robbie. It spawned the hit single "Boa Sorte/Good Luck", a duet with Ben Harper, which peaked at number one in both Brazil and Portugal, and was the most played song in Brazilian radio stations in the year of 2008. The second single, "Amado", also became a number-one hit in Brazil and the 15th most played song in the same year.
! is an album by The Dismemberment Plan. It was released on October 2, 1995, on DeSoto Records. The band's original drummer, Steve Cummings, played on this album but left shortly after its release.
The following people were involved in the making of !:
Albums of recorded music were developed in the early 20th century, first as books of individual 78rpm records, then from 1948 as vinyl LP records played at 33 1⁄3 rpm. Vinyl LPs are still issued, though in the 21st century albums sales have mostly focused on compact disc (CD) and MP3 formats. The audio cassette was a format used in the late 1970s through to the 1990s alongside vinyl.
An album may be recorded in a recording studio (fixed or mobile), in a concert venue, at home, in the field, or a mix of places. Recording may take a few hours to several years to complete, usually in several takes with different parts recorded separately, and then brought or "mixed" together. Recordings that are done in one take without overdubbing are termed "live", even when done in a studio. Studios are built to absorb sound, eliminating reverberation, so as to assist in mixing different takes; other locations, such as concert venues and some "live rooms", allow for reverberation, which creates a "live" sound. The majority of studio recordings contain an abundance of editing, sound effects, voice adjustments, etc. With modern recording technology, musicians can be recorded in separate rooms or at separate times while listening to the other parts using headphones; with each part recorded as a separate track.
+ (the plus sign) is a binary operator that indicates addition, with 43 in ASCII.
+ may also refer to:
Sim or Shim is a Korean surname. There are six Shim clans in Korea based in the regions ofCheongsong, Pungsan, Samcheok, Buyu, Uiryeong, and Jeonju. The biggest Sim clan is Cheongsong; they comprise about 85% of the all those with the surname Shim. Fourteen percent of all Korean Shims are members of the Pungsan and Samcheok clans. As of 2000, there were 252,255 people with this surname in South Korea, less than 1% of the population.
Sim (Russian: Сим) is a town in Ashinsky District of Chelyabinsk Oblast, Russia, located on the Sim River, 340 kilometers (210 mi) west of Chelyabinsk, the administrative center of the oblast. Population: 14,466 (2010 Census); 16,377 (2002 Census); 20,164 (1989 Census).
It was founded in 1759 as Simsky Zavod (Си́мский Заво́д, lit. Sim's Plant), a settlement around an ironworks. It was renamed Sim and granted town status on November 13, 1942.
Within the framework of administrative divisions, it is, together with two rural localities, incorporated within Ashinsky District as the Town of Sim. As a municipal division, the Town of Sim is incorporated within Ashinsky Municipal District as Simskoye Urban Settlement.
It is the birthplace of Igor Kurchatov, a famous Soviet/Russian physicist.
20-sim is commercial modeling and simulation program for multidomain dynamic systems, which is developed by Controllab. With 20-sim models can be entered as equations, block diagrams, bond graphs and physical components. 20-sim is widely used for modeling complex multi-domain systems and the development of control systems.
20-sim supports four methods for modeling dynamic systems: iconic diagrams, block diagrams, bond graphs and equations and allows all of these methods to be used in one model. The package has advanced support for bond graph modeling, making it well known in bond graph communities. For modeling physical systems the package provides libraries for electrical systems, mechanical systems, hydraulics systems and thermal systems. For block diagrams, libraries comparable to those of Simulink, are provided. A feature of the software is the option to create models with differential equations and package them as block diagram elements or physical components.
20-sim models can be simulated using state of the art numerical integration methods. After checking and processing, models are directly converted into machine code, resulting in high speed simulations. Unlike Simulink, simulation results are shown in 20-sim in a separate window called the Simulator. The simulator is versatile: plots can be displayed horizontally and vertically as time and frequency based plots and 3D animations.