Saare ots

Saare ots is a cape belonging to the country of Estonia.

Coordinates: 58°33′52″N 23°30′09″E / 58.5644°N 23.5025°E / 58.5644; 23.5025

OTS

OTS

OTs-20 Gnom

The OTs-20 Gnom ("Gnome") is a Russian revolver manufactured by the KBP Instrument Design Bureau. It uses a proprietary 12.5x40mm STs-110 cartridge developed from a 32 gauge shotgun cartridge. It can fire lead slug (STs-110-04), lead shot (STs-110-02), and armor-piercing steel-core slug (STs-110) cartridges, as well as three types of non-lethal ammunition. The revolver is smooth bore and so it lacks accuracy but has high muzzle velocity and stopping power.

A tactical laser projector is available that mounts on an accessory rail under the ejector rod shroud. It is turned on and off via a pressure switch that can be attached on the grip; the operator just squeezes the grip and the projector goes on or off.

The manufacturer claims that the steel-core slug can penetrate 4.5 mm of "standard body armor plate" at 25 m. They also claim that the dispersion of this bullet at this distance is about 5 cm.

Development

The gun was designed by A.N. Nevizhin (А.Н. Невижин), V.I. Seregin (В.И. Серёгин) and S.V. Zotov (С.В. Зотов) at TsKIB SOO. Its production started in 1994, and only 200 pieces have been known to be made as of 2013. The gun was partially derived from the 9 mm OTs-11 Nickel revolver previously developed by Nevizhin and Zotov.

OTs-23 Drotik

The OTs-23 Drotik (ОЦ-23 Дротик, Russian for "dart") is a blow-back operated machine pistol developed and used in Russia. The gun is also known as SBZ (Russian: СБЗ) from the initials of its designers — I. Stechkin, A.V. Baltser (А.В. Бальцер), and A.V. Zinchenko (А.В. Зинченко)

The weapon has a three-position select fire switch; safe, semi-automatic, and three-round burst. The pistol features an external indicator that allows the operator to quickly see how many cartridges remain in the magazine.

It is designed as a special operations and personal defence weapon (PDW). It has compensator openings cut into the end of the barrel to vent gases and make the weapon more stable during automatic burst fire.

Very few of these guns were manufactured; it was however the basis of the development of the OTs-33. The 5.45x18mm MPT cartridge, although successful in the PSM pistol, was considerably underpowered for a gun of this size and intended for PDW role.

References

See also