SNECMA Atar Volant

The original Atar Volant or C.400 P1 was a turbojet engine produced by SNECMA (Société National d'Etude et de Construction de Moteurs d'Aviation) engineers, as part of their 'Atar' series. Encased in a basic fairing which could hold fuel and remote-control equipment, the unit weighed 5,600 pounds (2550 kg) and generated a thrust of approximately 6,200 pounds-force (27.6 kN); the Atar Volant was able to cause vertical lift, which was precisely its purpose. There were later Atar Volant models, each made improvements and alterations to the previous designs, and eventually resulted in a full-fledged craft.

Background and purpose

The Coléoptère was a VTOL or "Vertical Take-Off and Landing" aircraft that was designed by SNECMA during the 1950s. While the Coléoptère was not the first VTOL aircraft, none of its predecessors had an annular wing designed to land vertically. The benefit of this annular wing was the requirement for very little landing or take-off space. However, the design of the Coléoptère met with many problems, such as overcoming the torque imparted to a vertical engine by its own turbine wheels and rotating compressor, and discovering and developing a method of balancing the craft on the column of air released from its jet pipe during the take-off and landing phase, as well as, more particularly, during manoeuvres out of the vertical positioning. To address some of these problems, as well as to provide a way to achieve vertical lift, SNECMA set to work on what was to become the first model of the Atar Volants.

Snecma Atar

The Snecma Atar is a French axial-flow turbojet engine built by Snecma. It was derived from the German World War II BMW 018 design, and developed by ex-BMW engineers through a progression of more powerful models. The name is derived from its original design group, Atelier technique aéronautique de Rickenbach near Lindau within the French Occupation Zone of Germany. The Atar powered many of the French post-war jet aircraft, including the Vautour, Étendard and Super Étendard, Super Mystère and several models of the Mirage.

History

Background

Herman Östrich's team in charge of the development of the BMW 003 engine had moved to the town of Stassfurt, near Magdeburg, in February 1945. An underground production factory was being set up in a salt mine outside town by C.G. Rheinhardt in a desperate attempt to continue engine production in face of the now overwhelming Allied air campaign. This mine is well known historically as it was also being used for the storage of uranium compounds as part of the Nazi atomic bomb program.

SNECMA Atar 101

The SNECMA ATAR 101 is a French axial-flow turbojet engine built by SNECMA. It was derived from engines and design work carried out at BMW in Germany during World War II, and extensively developed though a progression of more powerful models. The name is derived from its original design group, Atelier Technique Aéronautique de Rickenbach employing Herman Östrich and many of the wartime BMW gas turbine design group as well as other German engine design teams. The ATAR 101 powered many of the French post-war jet aircraft, including the Vautour II, Étendard IV, Super Mystère B2, and the Mirage III-001, prototype of the Mirage III series.

Design and development

At the end of World War II the French aircraft industry was in disarray, having been commandeered by the German government to produce mostly German designed aircraft and aero-engines. To develop an indigenous gas turbine aero-engine the French government acquired the services of a large contingent of German design engineers and technicians. Some of these engineers formed the Atelier Technique Aéronautique de Rickenbach, led by Dr. Herman Östrich who had been developing gas turbine engines at BMW. By September the team were housed at the Dornier factory at Rickenbach near Lindau on Lake Constance and had largely completed design of the ATAR 101 by October 1945. A contract for development of the engine was awarded in December 1945, a stipulation being that all manufacturing was to be carried out in France.