A reserve static line, occasionally called a Stevens Lanyard, is a device that automatically opens the reserve parachute container when the main parachute is cut-away. The RSL is a lanyard connecting one or both of the main parachute risers to the reserve ripcord.
The primary advantage of using an RSL is a faster reserve parachute deployment compared with using emergency handles alone; after a cut-away, the RSL will usually activate before the reserve deployment ripcord is pulled. However, proper emergency procedures require the reserve ripcord to be pulled in the event that the RSL is disconnected or not functioning correctly. An RSL also offers protection in the event a jumper cuts-away but does not (or can not) reach for the reserve deployment handle.
The RSL can be disengaged by a skydiver in situations where it is desirable to detach the main parachute without deploying the reserve. Examples of such situations may include certain high-wind landings (in case the parachute must be cut away if the skydiver is being dragged across the ground), when performing canopy formations or when landing over water. The RSL attaches to the risers through a small metal loop that will disconnect when a fabric tab is pulled.
A static line is a fixed cord attached to a large, stable object. It is used for safety in construction and to open parachutes automatically for paratroopers and novice parachutists.
In parachuting, a static line is a cord attached at one end to the aircraft and at the other end to the top of the jumper's 'D-Bag' (Deployment Bag, into which the canopy is packed). The parachutist's fall from the aircraft causes the static line to become taut, this then pulls the D-Bag out of the container on the jumper's back. The static line and D-Bag stay with the aircraft as the jumper leaves, and is pulled back into the aircraft by the dispatcher. Now free of its D-Bag, the canopy is allowed to inflate as the jumper continues to fall. Effectively, the jumper drags the parachute behind him, causing the upward-rushing wind to force open and inflate the canopy. The canopy should inflate and begin supporting the jumper within 4 seconds. In the unlikely event of a malfunction, students are taught how to cut away the main canopy and deploy the reserve chute. The aim of static line progression is to train students to maintain the correct, stable body position upon exiting the aircraft, and to teach how to deploy the canopy via the pilot chute mechanism.
Static Line or static line can mean:
This is an alphabetical List of G.I. Joe: A Real American Hero characters whose code names start with the letters S-Z.
Salvo is the G.I. Joe Team's Anti-Armor Trooper. His real name is David K. Hasle, and he was born in Arlington, Virginia. Salvo was first released as an action figure in 1990, and again in 2005. Both versions have the T-shirt slogan 'The Right of Might'.
Salvo's primary military specialty is anti-armor trooper. He also specializes in repairing "TOW/Dragon" missiles. Salvo expresses a deep distrust of advanced electronic weaponry. He prefers to use mass quantities of conventional explosives to overwhelm enemy forces.
In the Marvel Comics G.I. Joe series, he first appeared in issue #114. There, he fights as part of a large scale operation against Cobra forces in the fictional country of Benzheen. Steeler, Dusty, Salvo, Rock'N'Roll and Hot Seat get into vehicular based combat against the missile expert Metal-Head He is later part of the Joe team on-site who defends G.I. Joe headquarters in Utah against a Cobra assault.