Radium chloride

Radium chloride (RaCl₂) is a chemical compound of radium and chlorine, and the first radium compound isolated in a pure state. Marie Curie and André-Louis Debierne used it in their original separation of radium from barium. The first preparation of radium metal was by the electrolysis of a solution of this salt using a mercury cathode.

Preparation

Radium chloride crystallises from solution as the dihydrate. It may be dehydrated by heating to 100 °C in air for one hour followed by 5 ¹⁄₂ hours at 520 °C under argon. If the presence of other anions is suspected, the dehydration may be effectuated by fusion under hydrogen chloride.

Radium chloride can also be prepared by heating radium bromide in a flow of dry hydrogen chloride gas, or by dehydrating radium sulfate with dry air and then heating the sulfate in a stream of hydrogen chloride.

Properties

Radium chloride is a colorless-white salt with a blue-green luminescence, especially when heated. Its color gradually changes to yellow with aging, whereas contamination by barium may impart a rose tint. It is less soluble in water than other alkaline earth metal chlorides – at 25 °C its solubility is 245 g/L whereas that of barium chloride is 307 g/L, and the difference is even larger in hydrochloric acid solutions. This property is used in the first stages of the separation of radium from barium by fractional crystallization. Radium chloride is only sparingly soluble in azeotropic hydrochloric acid and virtually insoluble in concentrated hydrochloric acid.

Radium-223

Radium-223 (Ra-223, ²²³Ra) is an isotope of radium with an 11.4-day half-life, in contrast to the more common isotope radium-226, discovered by the Curies, which has a 1601-year half-life. The principal use of radium-223, as a radiopharmaceutical to treat metastatic cancers in bone, takes advantage of its chemical similarity to calcium, and the short range of the alpha radiation it emits.

Origin and preparation

Although radium-223 is formed naturally in trace amounts by the decay of uranium-235, it is generally made artificially, by exposing natural radium-226 to neutrons to produce radium-227, which decays with a 42-minute half-life to actinium-227. Actinium-227 (half-life 21.8 years) in turn decays via thorium-227 (half-life 18.7 days) to radium-223. This decay path makes it convenient to prepare radium-223 by "milking" it from an actinium-227 containing generator or "cow", similar to the moly cows widely used to prepare the medically important isotope technetium-99m.

Medical use