Pioneer Venus Multiprobe

The Pioneer Venus Multiprobe, also known as Pioneer Venus 2 or Pioneer 13 was a spacecraft launched in 1978 to explore Venus as part of NASA's Pioneer program.

Spacecraft

The Pioneer Venus Multiprobe bus was constructed by the Hughes Aircraft Company, built around the HS-507 bus. It was cylindrical in shape, with a diameter of 2.5 metres (8 ft 2 in) and a mass of 290 kilograms (640 lb). Unlike the probes, which did not begin making direct measurements until they had decelerated lower in the atmosphere, the bus returned data on Venus' upper atmosphere.

The bus was targeted to enter the Venusian atmosphere at a shallow entry angle and transmit data until destruction by the heat of atmospheric friction. The objective was to study the structure and composition of the atmosphere down to the surface, the nature and composition of the clouds, the radiation field and energy exchange in the lower atmosphere, and local information on the atmospheric circulation pattern. With no heat shield or parachute, the bus made upper atmospheric measurements with two instruments, an Ion Mass Spectrometer (BIMS) and a Neutral Mass Spectrometer (BNMS), down to an altitude of about 110 km before disintegrating on December 9, 1978.

Pioneer Venus Orbiter

The Pioneer Venus Orbiter, also known as Pioneer Venus 1 or Pioneer 12, was a mission to Venus conducted as part of the Pioneer program. Launched in May 1978 atop an Atlas-Centaur rocket, the spacecraft was inserted into an elliptical orbit around Venus on December 4, 1978. It returned data on Venus until October 1992.

Launch and arrival at Venus

The Pioneer Venus Orbiter was launched by an Atlas SLV-3D Centaur-D1AR rocket, which flew from Launch Complex 36A at the Cape Canaveral Air Force Station. The launch occurred at 13:13:00 on May 20, 1978, and deployed the Orbiter into heliocentric orbit for its coast to Venus. Venus orbit insertion occurred on December 4, 1978.

Spacecraft

Manufactured by Hughes Aircraft Company, the Pioneer Venus Orbiter was based on the HS-507 bus. The spacecraft was a flat cylinder, 2.5 meters (8.2 ft) in diameter and 1.2 meters (3.9 ft) long. All instruments and spacecraft subsystems were mounted on the forward end of the cylinder, except the magnetometer, which was at the end of a 4.7 meters (15 ft) boom. A solar array extended around the circumference of the cylinder. A 1.09 metres (3 ft 7 in) despun dish antenna provided S and X band communication with Earth. A Star-24 solid rocket motor was integrated into the spacecraft to provide the thrust to enter orbit around Venus.

Pioneer Venus project

The Pioneer Venus project was part of the Pioneer program consisting of two spacecraft, the Pioneer Venus Orbiter and the Pioneer Venus Multiprobe, launched to Venus in 1978. The program was managed by NASA's Ames Research Center.

The Pioneer Venus Orbiter entered orbit around Venus on December 4, 1978, and performed observations to characterize the atmosphere and surface of Venus. It continued to transmit data until October 1992.

The Pioneer Venus Multiprobe deployed four small probes into the Venusian atmosphere on December 9, 1978. All four probes transmitted data throughout their descent to the surface. One probe survived landing and transmitted data from the surface for over an hour.

See also

External links