Pentium M

The Pentium M is a family of mobile 32-bit single-core x86 microprocessors (with the modified Intel P6 microarchitecture) introduced in March 2003 and forming a part of the Intel Carmel notebook platform under the then new Centrino brand. The Pentium M processors had a maximum thermal design power (TDP) of 5–27 W depending on the model, and were intended for use in laptops (thus the "M" suffix standing for mobile). They evolved from the core of the last Pentium III–branded CPU by adding the front-side bus (FSB) interface of Pentium 4, an improved instruction decoding and issuing front end, improved branch prediction, SSE2 support, and a much larger cache. The first Pentium M–branded CPU, code-named Banias, was followed by Dothan. The Pentium M-branded processors were succeeded by the Core-branded dual-core mobile Yonah CPU with a modified microarchitecture.

Overview

The Pentium M represented a new and radical departure for Intel, as it was not a low-power version of the desktop-oriented Pentium 4, but instead a heavily modified version of the Pentium III Tualatin design (itself based on the Pentium II core design, which in turn had been a heavily improved evolution of the Pentium Pro). It is optimized for power efficiency, a vital characteristic for extending notebook computer battery life. Running with very low average power consumption and much lower heat output than desktop processors, the Pentium M runs at a lower clock speed than the laptop version of the Pentium 4 (The Pentium 4-Mobile, or P4-M), but with similar performance - a 1.6 GHz Pentium M can typically attain or even surpass the performance of a 2.4 GHz Pentium 4-M. The Pentium M 740 has been tested to perform up to approximately 7,400 MIPS and 3.9 GFLOPS (using SSE2).

P6 (microarchitecture)

The P6 microarchitecture is the sixth-generation Intel x86 microarchitecture, implemented by the Pentium Pro microprocessor that was introduced in November 1995. It is sometimes referred to as i686. It was succeeded by the NetBurst microarchitecture in 2000, but eventually revived in the Pentium M line of microprocessors. The successor to the Pentium M variant of the P6 microarchitecture is the Core microarchitecture which in turn is also derived from the P6 microarchitecture.

From Pentium Pro to Pentium III

The P6 core was the sixth generation Intel microprocessor in the x86 line. The first implementation of the P6 core was the Pentium Pro CPU in 1995, the immediate successor to the original Pentium design (P5).

Some techniques first used in the x86 space in the P6 core include:

Pentium

Pentium is a brand used for a series of x86-compatible microprocessors produced by Intel since 1993. In its current form, Pentium processors are considered entry-level products that Intel rates as "two stars", meaning that they are above the low-end Atom and Celeron series but below the faster Core i3, i5 and i7 lines as well as the high-end Xeon processors.

The current Pentium processors have only the name in common with the early ones, and are in fact based on the Intel Core architecture, typically implemented by lowering the clock frequency and disabling some features, such as hyper-threading, virtualization and, partly, L3 cache.

The name Pentium is originally derived from the Greek word pente (πέντε), meaning "five" (a reference to Intel's fifth-generation microarchitecture employed on the first Pentium processors), with the Latin ending -ium.

Overview

During development Intel generally identifies processors with codenames, such as Prescott, Willamette, Coppermine, Katmai, Klamath or Deschutes. These usually become widely known, even after the processors are given official names on launch.

Pentium III

The Pentium III (marketed as Intel Pentium III Processor, informally PIII, also stylized as Pentium !!! ) brand refers to Intel's 32-bit x86 desktop and mobile microprocessors based on the sixth-generation P6 microarchitecture introduced on February 26, 1999. The brand's initial processors were very similar to the earlier Pentium II-branded microprocessors. The most notable differences were the addition of the SSE instruction set (to accelerate floating point and parallel calculations), and the introduction of a controversial serial number embedded in the chip during the manufacturing process.

Processor cores

Similarly to the Pentium II it superseded, the Pentium III was also accompanied by the Celeron brand for lower-end versions, and the Xeon for high-end (server and workstation) derivatives. The Pentium III was eventually superseded by the Pentium 4, but its Tualatin core also served as the basis for the Pentium M CPUs, which used many ideas from the P6 microarchitecture. Subsequently, it was the Pentium M microarchitecture of Pentium M branded CPUs, and not the NetBurst found in Pentium 4 processors, that formed the basis for Intel's energy-efficient Core microarchitecture of CPUs branded Core 2, Pentium Dual-Core, Celeron (Core), and Xeon.

Pentium II

The Pentium II brand refers to Intel's sixth-generation microarchitecture ("P6") and x86-compatible microprocessors introduced on May 7, 1997. Containing 7.5 million transistors (27.4 million in the case of the mobile Dixon with 256 KB L2 cache), the Pentium II featured an improved version of the first P6-generation core of the Pentium Pro, which contained 5.5 million transistors. However, its L2 cache subsystem was a downgrade when compared to Pentium Pros. In early 1999, the Pentium II was superseded by the almost identical Pentium III, which basically only added SSE instructions to the CPU.

In 1998, Intel stratified the Pentium II family by releasing the Pentium II-based Celeron line of processors for low-end workstations and the Pentium II Xeon line for servers and high-end workstations. The Celeron was characterized by a reduced or omitted (in some cases present but disabled) on-die full-speed L2 cache and a 66 MT/s FSB. The Xeon was characterized by a range of full-speed L2 cache (from 512 KB to 2048 KB), a 100 MT/s FSB, a different physical interface (Slot 2), and support for symmetric multiprocessing.