Oil burner

An oil burner or oil furnace is a heating device which burns heating oil, diesel fuel or other similar fuels. The fuel is atomized into a fine spray usually by forcing it under pressure through a nozzle. This spray is usually ignited by an electric spark with the air being forced through by an electric fan.

Fuel injection

Fuel is injected into the combustion chamber by a spray nozzle.

The nozzles are usually supplied with high pressure oil. Because of problems with erosion, and blockage due to lumps in the oil, they need frequent replacement, typically every year. Fuel nozzles are usually rated in fuel volume flow per unit time e.g. USGal/h (U.S. Gallons per hour).

A fuel nozzle is characterized by three features:

Alternatively fuel may be passed over a tiny orifice fed with compressed air. This arrangement is referred to as Babington atomiser/nozzle, named after its inventor Robert Babington. As the oil flows over the nozzle, the fuel needn't be under any great pressure. If the pump can handle such the oil may even contain lumps such as scraps of food. Because it is only compressed air that passes through the orifice hole, such nozzles do not suffer much from erosion.

Oil burner (engine)

An oil burner engine is a steam engine that uses oil as its fuel. The term is often used with reference to a locomotive or ship engine that burns oil, to heat water, to produce steam which drives the pistons, or turbines, from which the power is derived. Some engines of this form were originally designed to be coal powered and were converted. An early pioneer of this form of engine was James Holden, of Britain's Great Eastern Railway.

This is mechanically very different from a diesel engine that is a form of internal combustion engine, which is sometimes colloquially referred to as an oil burner.

Conversion

When a coal-burning steam locomotive is converted to oil-burning, various modifications are usual: