Mini (Mark I)

The Mark I Mini (1959–1967) was the first version of British Motor Corporation's Mini. It is characterised by its sliding windows, external door hinges and "moustache" grille. In the United Kingdom the Mark I was produced between 1959 and 1967, with production in Australia continuing until 1970.

Design

Designed as project ADO15 (Austin Drawing Office 15), the first models were marketed with the names Austin Seven (often written as SE7EN) and Morris Mini-Minor in England. Until 1962, they appeared as the Austin 850 and Morris 850 in some export markets. The production model differed from the original prototype (affectionately named "The Orange Box" because of its colour) due to the addition of a modified front subframe, on which the engine was mounted, and by the engine being mounted with the carburettor at the back, rather than at the front, as in the prototype, to reduce wear on the gearbox.

The proposed engine size was originally 948 cc as used in the Morris Minor and Austin A35. However, Leonard Lord, chairman of BMC thought that the 90 mph (140 km/h) top speed was excessive and thus reduced the engine size to 848 cc to gain a more manageable speed (for the time) of 72 mph (116 km/h). Issigonis' suspension featured the use of rubber cones as springs: the spring rate of rubber changes with compression, allowing the suspension to adapt to passenger load variations (a full passenger load could actually double the tiny vehicle's gross weight). A conventional suspension would have required an increase in height to the design. This unique design was adapted from Issigonis's home-built racer and built for the Mini by Alex Moulton.

Mark I

Mark I or Mark 1 often refers to the first version of a weapon or military vehicle, and is sometimes used in a similar fashion in civilian product development. In some instances, the Arabic numeral "1" is substituted for the Roman numeral "I". "Mark", meaning "model" or "variant", can itself be abbreviated "Mk."

Military and weaponry

British heavy tanks of World War I

British heavy tanks were a series of related vehicles developed by the British Army during the First World War. The Mark I was the world's first tank to enter combat. Born of the need to break the domination of trenches, barbed wire and machine guns over the battlefields of the Western Front, it was the first vehicle to be named "tank", a name chosen as an expedient to maintain secrecy and to disguise its true purpose. It was developed to be able to cross trenches, resist small-arms fire, travel over difficult terrain, carry supplies, and to capture fortified enemy positions. It is regarded as successful in many respects, but suffered from many problems owing to its primitive nature.

The Mark I entered service in August 1916, and was first used in action on the morning of 15 September 1916 during the Battle of Flers-Courcelette, part of the Somme Offensive. With the exception of the few interim Mark II and Mark III tanks, it was followed by the largely similar Mark IV, which first saw combat in June 1917. The Mark IV was used en masse (about 460 tanks) at the Battle of Cambrai in November 1917. The Mark V, with its much improved transmission, entered service in mid-1918.

Mark I (detector)

The Mark I, also known as the SLAC-LBL Magnetic Detector, was a particle detector that operated at the interaction point of the SPEAR collider from 1973 to 1977. It was the first 4π detector, i.e. the first detector to uniformly cover as much of the 4π steradians (units of solid angle) around the interaction point as possible with different types of component particle detectors arranged in layers. This design proved quite successful, and the detector was used in discoveries of the J/ψ particle and tau lepton, which both resulted in Nobel prizes. This basic design philosophy continues to be used in all modern collider detectors.

References