Cut-throat, cutthroat or cut throat may refer to:
Michael Slade (born 1947, Lethbridge, Alberta) is the pen name of Canadian novelist Jay Clarke, a lawyer who has participated in more than 100 criminal cases and who specializes in criminal insanity. Before Clarke entered law school, his undergraduate studies focused on history. Clarke’s writing stems from his experience as a practicing lawyer and historian, as well as his extensive world travel. He works closely with police officers to ensure that his novels incorporate state-of-the-art police techniques. Writing as a team with a handful of other authors, Clarke has published a series of police procedurals about the fictional Special External Section (Special X) of the Royal Canadian Mounted Police. His novels describe Special X protagonists as they track down fugitives, typically deranged murderers. Four other authors have contributed under the name Michael Slade: John Banks, Lee Clarke, Rebecca Clarke, and Richard Covell. Despite the collaborative nature of the books, Jay Clarke is the predominant voice in their writing. Currently, Jay and his daughter Rebecca write under the Slade name.
Cutthroat (Daniel "Danny" Leighton) is a comic book character, a supervillain appearing in American comic books published by Marvel Comics. The character first appeared in Marvel Team-Up (1st series) #89. He is the brother of Diamondback.
Danny Leighton was born in Austin, Texas. He was a member of the Savage Crims, a New York street gang, as a young man. He later became an assassin and was (as his first high-profile job) hired by Amos Jardine to kill Spider-Man, in place of the mad killer Arcade. Cutthroat battled Nightcrawler, who had gotten wind of the plan, and Spider-Man, and they defeated him with some secret assistance from Arcade himself.
Many years later, he defeated Mangler and Deathstrike in a fight to the death to become the Red Skull's new chief operative, replacing Crossbones. He underwent training by the Taskmaster. He tried to persuade Blackwing and Jack O'Lantern to help him free Mother Night from the police. He initiated a brief affair with Mother Night. With the Skeleton Crew, he battled Crossbones and Diamondback. He realized that Diamondback was his sister, Rachel, and revealed his true identity to her.
Ground may refer to:
As the neutral point of an electrical supply system is often connected to earth ground, ground and neutral are closely related. Under certain conditions, a conductor used to connect to a system neutral is also used for grounding (earthing) of equipment and structures. Current carried on a grounding conductor can result in objectionable or dangerous voltages appearing on equipment enclosures, so the installation of grounding conductors and neutral conductors is carefully defined in electrical regulations. Where a neutral conductor is used also to connect equipment enclosures to earth, care must be taken that the neutral conductor never rises to a high voltage with respect to local ground.
Ground or earth in a mains (AC power) electrical wiring system is a conductor that provides a low-impedance path back to the source to prevent hazardous voltages from appearing on equipment. (The terms "ground" and "earth" are used synonymously here. "Ground" is more common in North American English, and "earth" is more common in British English.) Under normal conditions, a grounding conductor does not carry current.
In electrical engineering, ground or earth is the reference point in an electrical circuit from which voltages are measured, a common return path for electric current, or a direct physical connection to the Earth.
In electrical power distribution systems, a protective ground conductor is an essential part of the safety Earthing system.
Electrical circuits may be connected to ground (earth) for several reasons. In mains powered equipment, exposed metal parts are connected to ground to prevent user contact with dangerous voltage if electrical insulation fails. Connections to ground limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices. In some telegraph and power transmission circuits, the earth itself can be used as one conductor of the circuit, saving the cost of installing a separate return conductor (see single-wire earth return).
For measurement purposes, the Earth serves as a (reasonably) constant potential reference against which other potentials can be measured. An electrical ground system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level. In electronic circuit theory, a "ground" is usually idealized as an infinite source or sink for charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard.