In baseball, a slider is a breaking ball pitch that tails laterally and down through the batter's hitting zone; it is thrown with speed less than a fastball but greater than the pitcher's curveball.
The break on the pitch is shorter than that of the curveball, and the release technique is 'between' those of a curveball and a fastball. The slider is similar to the cutter, a fastball pitch, but is more of a breaking ball than the cutter. The slider is also known as a yakker or a snapper.
Depending on velocity, a pitch can fall anywhere on the continuum from "fastball" to "slider":
The most notable difference between a slider and curveball is that the curveball delivery includes a downward yank on the ball as it is released in addition to the lateral spin applied by the slider grip. The slider is released off the index finger, while the curveball is released off the middle finger. If the pitcher is snapping his wrist as he throws, and the movement is more downward than sideways, then he is probably throwing a curveball or slurve, and not a true "slider". When throwing a slider, the pitcher should create a "dot" on the baseball; this means that as the ball approaches home plate, the rotation of the ball is forming a dot. On a good slider, the "dot" will be down where it is not noticeable for a hitter to pick up. From the batter's perspective, this dot appears white, whereas the dot is red for a curve ball (created by the seam movement), allowing many skilled batters to immediately recognize the type of pitch. By having the dot on the bottom part of the ball, the pitcher will create good depth to the pitch. A good, hard slider has a slight break across the plate and a slight drop on its plane to the hitter.
In cricket, a slider is a type of delivery bowled by a wrist spin bowler. Whereas a topspinner is released with the thumb facing the batsman, a slider is bowled in a similar manner to a legbreak, but instead of imparting sidespin with the third finger, the bowler allows his fingers to roll down the back of the ball, providing a mixture of sidespin and backspin. Whereas a topspinner tends to dip more quickly and bounce higher than a normal delivery, a slider does the opposite: it carries to a fuller length and bounces less than the batsman might expect. The sliders will typically head towards the batsman with a scrambled seam (with the ball not spinning in the direction of the seam, so the seam direction is not constant, unlike in conventional spin bowling). This has less effect on the flight and bounce but absence of leg spin may deceive the batsman. Frequently the slider is bowled with a mixture of side spin and backspin. This has the effect of making the ball harder to differentiate from the leg break for the batsmen without reducing the mechanical effects caused by the backspin. This delivery may skid straight on or it may turn a small amount.
The form factor of a mobile phone is its size, shape, and style, as well as the layout and position of its major components. There are three major form factors – bar phones, flip phones, and sliders – as well as sub-categories of these forms and some atypical forms.
A bar (also known as a slab, block, candybar) phone takes the shape of a cuboid, usually with rounded corners and/or edges. The name is derived from the rough resemblance to a chocolate bar in size and shape. This form factor is widely used by a variety of manufacturers, such as Nokia and Sony Ericsson. Bar type mobile phones commonly have the screen and keypad on a single face. The Samsung SPH-M620 has a unique bar style, offering different devices on either side of the bar: a phone on one side, and a digital audio player on the other. Sony Ericsson also had a well-known 'MarsBar' phone model CM-H333.
Since mid 2010s, almost all the mobile phones come in bar form factor.
"Brick" is a slang term almost always used to refer to large, outdated bar-type phones, typically early mobile phones with large batteries and electronics. However, "brick" has more recently been applied to older phone models in general, including non-bar form factors (flip, slider, swivel, etc.), and even early touchscreen phones as well, due to their size and relative lack of functionality to newer models. Such early mobile phones, such as the Motorola DynaTAC, have been displaced by newer smaller models which offer greater portability thanks to smaller antennas and slimmer battery packs.
Gender is the range of characteristics pertaining to, and differentiating between, masculinity and femininity. Depending on the context, these characteristics may include biological sex (i.e. the state of being male, female or intersex), sex-based social structures (including gender roles and other social roles), or gender identity.
Sexologist John Money introduced the terminological distinction between biological sex and gender as a role in 1955. Before his work, it was uncommon to use the word gender to refer to anything but grammatical categories. However, Money's meaning of the word did not become widespread until the 1970s, when feminist theory embraced the concept of a distinction between biological sex and the social construct of gender. Today, the distinction is strictly followed in some contexts, especially the social sciences and documents written by the World Health Organization (WHO). However, in many other contexts, including some areas of social sciences, gender includes sex or replaces it. Although this change in the meaning of gender can be traced to the 1980s, a small acceleration of the process in the scientific literature was observed in 1993 when the USA's Food and Drug Administration (FDA) started to use gender instead of sex. In 2011, the FDA reversed its position and began using sex as the biological classification and gender as "a person's self representation as male or female, or how that person is responded to by social institutions based on the individual's gender presentation." In non-human animal research, gender is also commonly used to refer to the physiology of the animals.
Seaman is a naval rank and is either the lowest or one of the lowest ranks in most navies around the world. In the Commonwealth it is the lowest rank in the navy, followed by able seaman and leading seaman, and followed by the petty officer ranks.
In the United States, it means the lowest three enlisted rates of the U.S. Navy and U.S. Coast Guard, followed by the higher petty officer ranks. The equivalent of the seaman is the matelot in French-speaking countries, and Matrose in German-speaking countries.
The term "seaman" is also a general-purpose for a man or a woman who works anywhere on board a modern ship, including in the engine spaces, which is the very opposite of sailing. This is untrue in the US Navy where a sailor might be a seaman but not all US Navy sailors are a 'Seaman' as they might be an Airman, Fireman, Contructionman, or Hospital Corpsman. Furthermore, "seaman" is a short form for the status of an "able-bodied seaman," either in the navies or in the merchant marines. An able-bodied seaman is one who is fully trained and qualified to work on the decks and superstructure of modern ships, even during foul weather, whereas less-qualified sailors are restricted to remaining within the ship during times of foul weather — lest they be swept overboard by the stormy seas or by the high winds.
In baseball, a closing pitcher, more frequently referred to as a closer (abbreviated CL), is a relief pitcher who specializes in getting the final outs in a close game when his team is leading. The role is often assigned to a team's best reliever. Before the 1990s, pitchers in similar roles were referred to as a fireman, short reliever, and stopper. A small number of closers have won the Cy Young Award. Dennis Eckersley, Rollie Fingers, Goose Gossage, Bruce Sutter and Hoyt Wilhelm are closers who have been elected to the Baseball Hall of Fame.
A closer is generally a team's best reliever and designated to pitch the last few outs of games when their team is leading by a margin of three runs or fewer. Rarely does a closer enter with their team losing or in a tie game. A closer's effectiveness has traditionally been measured by the save, an official Major League Baseball (MLB) statistic since 1969. Over time, closers have become one-inning specialists typically brought in at the beginning of the ninth inning in save situations. The pressure of the last three outs of the game is often cited for the importance attributed to the ninth inning.