Fibre Channel Protocol

Fibre Channel Protocol (FCP) is the SCSI interface protocol utilizing an underlying Fibre Channel connection. The Fibre Channel Standards (FCS) defines a high-speed data transfer mechanism that can be used to connect workstations, mainframes, supercomputers, storage devices and displays. FCS addresses the need for very fast transfers of large volumes of information and could relieve system manufacturers from the burden of supporting the variety of channels and networks currently in place, as it provides one standard for networking, storage and data transfer. The key Fibre Channel characters are as follows:

Fibre Channel

Fibre Channel, or FC, is a high-speed network technology (commonly running at 2-, 4-, 8- and 16-gigabit per second rates) primarily used to connect computer data storage. Fibre Channel is standardized in the T11 Technical Committee of the International Committee for Information Technology Standards (INCITS), an American National Standards Institute (ANSI)-accredited standards committee. Fibre Channel was primarily used in supercomputers, but has become a common connection type for storage area networks (SAN) in enterprise storage. Despite its name, Fibre Channel signaling can run on an electrical interface in addition to fiber-optic cables.

Fibre Channel Protocol (FCP) is a transport protocol (similar to TCP used in IP networks) that predominantly transports SCSI commands over Fibre Channel networks.

Etymology

When the technology was developed, it supported only optical cabling (fiber); support for copper cables was added later. Despite this the development committee decided to keep the same name but switch to the British English spelling fibre for the standard. In American English spelling fiber refers only to optical cabling. Thus, a network using fibre channel can be implemented either with copper or optical fiber.