Edison screw

Edison screw (ES) is a standard socket for light bulbs. It was developed by Thomas Edison and was licensed in 1909 under the Mazda trademark. Normally, the bulbs have right-hand threaded metal bases (caps) which screw into a matching threaded sockets (lamp holders). For bulbs powered by the mains supply, the thread is connected to neutral and the contact on the bottom tip of the base is connected to live (hot).

In North America and continental Europe, Edison screws displaced other socket types for general lighting. In the early days of electrification, Edison screws were the only standard connector, and appliances other than bulbs were connected to the mains supply via light sockets. Today Edison screw sockets comply with international standards.

History

Early U.S. lamp manufacturers used different and incompatible bases. The Thomson-Houston Electric Company used a threaded stud at the bottom of the socket, and a flat contact ring. The Sawyer-Mann or Westinghouse base used a spring clip acting on grooves in the bulb base, and a contact stud at the bottom of the lamp. By about 1908, the Edison base was most common in the U.S., with the others falling out of use.