Draft (hull)

The draft (American) or draught (British) of a ship's hull is the vertical distance between the waterline and the bottom of the hull (keel), with the thickness of the hull included; in the case of not being included the draft outline would be obtained. Draft determines the minimum depth of water a ship or boat can safely navigate. The draft can also be used to determine the weight of the cargo on board by calculating the total displacement of water and then using Archimedes' principle. A table made by the shipyard shows the water displacement for each draft. The density of the water (salt or fresh) and the content of the ship's bunkers has to be taken into account. The closely related term "trim" is defined as the difference between the forward and aft drafts.

Drafts of a ship

Draft

Draft or draught may mean:

Watercraft dimensions

Selection processes

Entertainment

Draft (engineering)

In engineering, draft is the amount of taper for molded or cast parts perpendicular to the parting line. It can be measured in degrees or mm/mm (in/in).

Consider the fabrication of a hollow plastic box, without lid. Once the plastic has hardened around the mold, the mold must be removed. As the plastic hardens, it may contract slightly. By tapering the sides of the mold by an appropriate "draft angle", the mold will be easier to remove.

If the mold is to be removed from the top, the box should taper in towards the bottom, such that measuring the bottom internal dimension will yield a smaller length and width than measuring the top from which the mold is extracted.

By specifying the opening length and width, a draft angle, and a depth, it is not necessary to specify the dimensions for the internal surface, as these may be calculated from the above.

The manufacture of a part that incorporates zero or negative angles may require a mold that can be separated into two or more parts, in order to release the casting.

Draft (sail)

In nautical parlance, the draft or draught of a sail is a degree of curvature in a horizontal cross-section. Any sail experiences a force from the prevailing wind just because it impedes the air's passage. A sail with draft also functions as an airfoil when set at an angle slightly greater than the angle of the wind, producing lift which then propels.

The word "belly" is also used in reference to the draft of a sail (i.e. "More belly in the main sail.").

References

Ship (disambiguation)

A ship is a large vessel that floats on water, specifically the ocean and the sea.

Ship or ships may also refer to:

Acronyms:

In the arts:

Phosphatidylinositol-3,4,5-trisphosphate 5-phosphatase

Phosphatidylinositol-3,4,5-trisphosphate 5-phosphatase (EC 3.1.3.86, SHIP1, SHIP2, SHIP, p150Ship) is an enzyme with system name 1-phosphatidyl-1D-myo-inositol-3,4,5-trisphosphate 5-phosphohydrolase. This enzyme catalyses the following chemical reaction

This enzyme hydroylses 1-phosphatidyl-1D-myo-inositol 3,4,5-trisphosphate (PtdIns(3,4,5)P3) to produce PtdIns(3,4)P2.

References

External links