The steamboat Dix operated from 1904 to 1906 as part of the Puget Sound Mosquito Fleet. She was sunk in a collision which remains one of the most serious transportation accidents in the state of Washington to this day.
In May 2011, it was reported that wreckage likely to be that of the Dix had been confirmed off Seattle's Alki Point.
Dix was built in 1904 at the Tacoma yard of Crawford and Reid.. Dix was 102.5 ft (31.2 m) long, 20.5 ft (6.2 m) on the beam, 7.5 ft (2.3 m) depth of hold, and rated at 130 tons. Later, given her tragic end, it was recalled, perhaps superstitiously, that the launching of Dix was a failure. The vessel had simply refused to move down the ways at Crawford and Reid, and had to be hauled into the water the next day by Captain Sutter in command of Tacoma Tug and Barge’s Fairfield.
Dix was purpose-built for one route only, the run across Elliott Bay from Seattle to Alki Point, then the main recreation area for Seattle. Her owners were A.B.C. Dennison and W.L. Dudley, doing business as the Seattle and Alki Point Transportation Company. She was lightly built, and apparently top-heavy, as the steamboat inspectors twice refused to issue her a seaworthiness certificate, only relenting when her builders installed 7 tons of gravel ballast in her hull and 5 tons of iron weights bolted to her keel. Even so, she was said to be difficult to handle.
A steamboat is a boat in which the primary method of marine propulsion is steam power, typically driving propellers or paddlewheels. Steamboats sometimes use the prefix designation SS, S.S. or S/S (for 'Screw Steamer') or PS (for 'Paddle Steamer'), however these designations are most often used for Steamships.
The term steamboat is used to refer to smaller, insular, steam-powered boats working on lakes and rivers, particularly riverboats. As using steam became more reliable, steam power became applied to larger, ocean-going vessels.
Early attempts at powering a boat by steam were made by the French inventor Denis Papin and the English inventor Thomas Newcomen. Papin invented the steam digester (a type of pressure cooker) and experimented with closed cylinders and pistons pushed in by atmospheric pressure, analogous to the pump built by Thomas Savery in England during the same period. Papin proposed applying this steam pump to the operation of a paddlewheel boat and tried to market his idea in Britain. He was unable to successfully convert the piston motion into rotary motion and the steam could not produce enough pressure. Newcomen's design did solve the first problem, but remained shackled to the inherent limitations of the engines of the time.
Holland is the 19th studio album by the American rock group The Beach Boys, released in January 1973. It was recorded in Baambrugge, Netherlands over the summer of 1972 using a reconstructed studio sent from California, and with two Brian Wilson tracks rush-recorded in Los Angeles and added to the album at the last minute. The photograph on the album's front cover is an upside down image of the Kromme Waal, a canal that runs through the center of Amsterdam.
Holland included a bonus EP, Mount Vernon and Fairway (A Fairy Tale), a musical fairy tale written by Brian Wilson about a magical transistor radio who appears to a young prince. Narration was provided by the group's manager: Jack Rieley.
Just as Carl and the Passions – "So Tough" was coming to print, the Beach Boys, at manager Jack Rieley's urging, decided to pack up and record their next album in the Netherlands. They felt the change of scenery would make for some inspirational sessions, and perhaps even snap former leader Brian Wilson out of his deep depression.
Steamboat refers to:
DIX or Dix may refer to:
Quartier DIX30 is a commercial lifestyle centre located in Brossard, Quebec. It is considered Canada's first lifestyle centre and occupies an area of 2,746,063 sq ft (255,117.6 m2) in the L section of Brossard. Quartier DIX30 was designed to emulate an urban or downtown shopping experience with boutiques and to meet the needs of suburban dwellers living on the South Shore of Montreal. Its name (English: TEN30 District) refers to its location: at the west corner of the intersection between Autoroute 10 and Autoroute 30.
According to a RioCan press release, "Quartier DIX30 was originally planned in three phases. [...] Phase III goes beyond the initial agreement and comprises approximately 36 acres (15 ha) of adjacent land."
Following a press conference on September 14, 2006, the 150-million Canadian dollar phase I of Quartier DIX30 was opened to the public by the developer (Devimco Real Estate Development Firm|Devimco) and the majority owner (RioCan). This initial phase included the opening of 400,000 square feet (40,000 m2) of retail space and of a total of 78 boutiques and restaurants including, among many other national retailers.