Šuta
Šuta, ("Shuta"), was an Egyptian commissioner of the 1350-1335 BC Amarna letters correspondence. The name Šuta is a hypocoristicon-(nickname/petname) for the Ancient Egyptian god Seth, (Seth being the "God of the Desert", and an 'anti-Horus' god-(duality, Horus/Seth)).
The following letters are referenced to commissioner Šuta, (EA for 'el Amarna'):
The 2 letters of commissioner: Šuta
EA 288, "Benign neglect"
Abdi-Heba's letters, to the Egyptian pharaoh, are of moderate length, and topically discuss the intrigues of the cities, that are adjacent to Jerusalem, (a region named: Upu).
Letter EA 288: (Abdi-Heba no. 4 of 6)
EA 234, "Like Magdalu in Egypt"
Letter no. 2 of 3 by Satatna of Akka-(now Acre, Israel).
See also
References
UTA
UTA or Uta can refer to:
Places
Schools
Sports
People
Acronyms
Side-blotched lizard
Side-blotched lizards are lizards of the genus Uta. They are some of the most abundant and commonly observed lizards in the deserts of western North America. Their cycle among three colorized breeding patterns has achieved notoriety and is best described in the common side-blotched lizard. They commonly grow to six inches including the tail, with the males normally being the larger sex. Males often have bright throat colors.
These lizards are prey for many desert species. Snakes, larger lizards, and birds all make formidable predators to side-blotched lizards. Larger lizard species, such as collared, leopard, and spiny lizards, and roadrunners are the main predators. In turn, the side-blotched lizards eat arthropods, such as insects, spiders, and occasionally scorpions.
As a result of their high predation rate, these lizards are very prolific breeders. From April to June they breed, with the young emerging as early as late May. These inch-long young appear all through the summer, and into September.
Die
Die usually refers to the cessation of life.
Die may also refer to:
Objects
Other
Music
Die (integrated circuit)
A die in the context of integrated circuits is a small block of semiconducting material, on which a given functional circuit is fabricated. Typically, integrated circuits are produced in large batches on a single wafer of electronic-grade silicon (EGS) or other semiconductor (such as GaAs) through processes such as photolithography. The wafer is cut (“diced”) into many pieces, each containing one copy of the circuit. Each of these pieces is called a die.
There are three commonly used plural forms: dice, dies, and die.
Images
Single NPN bipolar junction transistor die.
Single NPN bipolar junction transistor die.
Close-up of an RGB light-emitting diode, showing the three individual silicon dice.
Close-up of an RGB light-emitting diode, showing the three individual silicon dice.
A small-scale integrated circuit die, with bond wires attached.
A small-scale integrated circuit die, with bond wires attached.
A VLSI integrated-circuit die.
A VLSI integrated-circuit die.
Die (manufacturing)
A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press. Like molds, dies are generally customized to the item they are used to create. Products made with dies range from simple paper clips to complex pieces used in advanced technology.
Die forming
Forming dies are typically made by tool and die makers and put into production after mounting into a press. The die is a metal block that is used for forming materials like sheet metal and plastic. For the vacuum forming of plastic sheet only a single form is used, typically to form transparent plastic containers (called blister packs) for merchandise. Vacuum forming is considered a simple molding thermoforming process but uses the same principles as die forming. For the forming of sheet metal, such as automobile body parts, two parts may be used: one, called the punch, performs the stretching, bending, and/or blanking operation, while another part, called the die block, securely clamps the workpiece and provides similar stretching, bending, and/or blanking operation. The workpiece may pass through several stages using different tools or operations to obtain the final form. In the case of an automotive component there will usually be a shearing operation after the main forming is done and then additional crimping or rolling operations to ensure that all sharp edges are hidden and to add rigidity to the panel.
Podcasts:
