Cotton picker

The mechanical cotton picker is a machine that automates cotton harvesting in a way that reduces harvest time and maximizes efficiency.

History

Cotton picking was originally done by hand. In many societies, like America, free slave and serf labor were utilized to pick the cotton, increasing the plantation owner's profit margins (See Trans-Atlantic Slave Trade). Eventually, mechanical cotton picking became practical in 1944, when International Harvester produced the first dozen of their successful commercial cotton pickers.

Conventional picker

The first pickers were only capable of harvesting one row of cotton at a time, but were still able to replace up to forty hand laborers. The current cotton picker is a self-propelled machine that removes cotton lint and seed (seed-cotton) from the plant at up to six rows at a time.

There are two types of pickers in use today. One is the "stripper" picker, primarily found in use in Texas. They are also found in Arkansas. It removes not only the lint from the plant, but a fair deal of the plant matter as well (such as unopened bolls). Later, the plant matter is separated from the lint through a process dropping heavier matter before the lint makes it to the basket at the rear of the picker. The other type of picker is the "spindle" picker. It uses rows of barbed spindles that rotate at high speed and remove the seed-cotton from the plant. The seed-cotton is then removed from the spindles by a counter-rotating doffer and is then blown up into the basket. Once the basket is full the picker dumps the seed-cotton into a "module builder". The module builder creates a compact "brick" of seed-cotton, weighing in at approximately 21,000 lb (16 un-ginned bales), which can be stored in the field or in the "gin yard" until it is ginned. Each ginned bale weighs roughly 480 lb (218.2 kg).