Cotter pin

Cotter pin may refer to:

In U.S. usage:

In British usage:

This usage difference is often a cause of confusion when companies of both countries work together.

The original design for the cotter pin was designed by Dr. Rudolf Cotter in 1834. The original design employed a bolt with a hole drilled through and shank of metal placed within the hole.

Cotter (pin)

A cotter is a pin or wedge passing through a hole to fix parts tightly together. In British usage cotter pin has the same meaning, but in the U.S. it refers to a different fastener.

Typical applications are in fixing a crank to its crankshaft, as in a bicycle, or a piston rod to a crosshead, as in a steam engine. Note: the angle of the wedge determines the position of the parts being held, therefore on a bicycle the pedal arms will only be at 180 degrees to each other if the angle of the cotter pin's wedge is the same on both pins.

Popular usage

Formerly, it was common to mount bicycle cranks using a cotter, though now usually a more easily maintained arrangement is used such as a square tapered or splined interface. These cotters have a short threaded section at the narrower end of the taper, which is used to hold the cotter in place with a washer and nut.

See also

References

External links