List of Fire Emblem (video game) characters

This is a character guide for the Game Boy Advance game Fire Emblem. Each character has his or her class labeled. A class is a category within the Fire Emblem series that outlines a unit's characteristics. Along with the character's class is their "promotion class" — the class that the character will upgrade to upon promotion. If a character has no promotion class, it means that they were already promoted when recruited into the party. Also mentioned for some characters are "supports." Supports are side conversations between characters which can result in statistical bonuses and character development (see here for more information about supports).

Main characters

Lady Lyndis

(a.k.a. Lyn)

Lyn (リン, Rin) is the first female main character in the series since Fire Emblem Gaiden. Although her full name is Lyndis (リンディス, Rindisu), she is referred to in almost all screens by her Sacaen name 'Lyn' throughout the game. The two names are generally regarded to be interchangeable, depending on who addresses her. She is 18 (15 in the Japanese version) at the beginning of the events of Fire Emblem.

Cog

A cog is a tooth of a gear or cogwheel or the gear itself.

A cog engages with another cog and motion in one will result in motion of the other. Gearwheels that engage with chains are sprockets, not cogs.

Cog, COG, or CoG may also refer to:

Media

In fiction

Cog (project)

Cog was a project at the Humanoid Robotics Group of the Massachusetts Institute of Technology. It was based on the hypothesis that human-level intelligence requires gaining experience from interacting with humans, like human infants do. This in turn required many interactions with humans over a long period. Because Cog's behavior responded to what humans would consider appropriate and socially salient environmental stimuli, the robot was expected to act more human. This behavior also provided the robot with a better context for deciphering and imitating human behavior. This was intended to allow the robot to learn socially, as humans do.

As of 2003, all development of the project had ceased.

Today Cog is retired to the Massachusetts Institute of Technology museum.

Purpose of the Cog Project

Goals of the Cog Project

Cog (ship)

A cog (or cog-built vessels) is a type of ship that first appeared in the 10th century, and was widely used from around the 12th century on. Cogs were generally built of oak, which was an abundant timber in the Baltic region of Prussia. This vessel was fitted with a single mast and a square-rigged single sail. These vessels were mostly associated with seagoing trade in medieval Europe, especially the Hanseatic League, particularly in the Baltic Sea region. They ranged from about 15 meters to 25 meters in length (49 ft to 82 ft) with a beam of 5 to 8 meters (16 ft to 26 ft), and the largest cog ships could carry up to about 200 tons.

Design

Cogs were characterized by a flush-laid flat bottom at midships but gradually shifted to overlapped strakes near the posts. They had full lapstrake planking covering the sides, generally starting from the bilge strakes, and double-clenched iron nails for plank fastenings. The keel, or keelplank, was only slightly thicker than the adjacent garboards and had no rabbet. Both stem and stern posts were straight and rather long, and connected to the keelplank through intermediate pieces called hooks. The lower plank hoods terminated in rabbets in the hooks and posts, but upper hoods were nailed to the exterior faces of the posts. Caulking was generally tarred moss that was inserted into curved grooves, covered with wooden laths, and secured by metal staples called sintels. Finally, the cog-built structure could not be completed without a stern-mounted hanging central rudder, which was a unique northern development. Cogs used to have open hulls and could be rowed short distances. In the 13th century they received decks.