Code (disambiguation)

A code is a rule for converting a piece of information into another object or action, not necessarily of the same sort.

Code may also refer to:

Science and technology

Computing

" (disambiguation)

The " symbol is a character with 34 in ASCII.

It may denote:

* (disambiguation)

The symbol * is called asterisk (42 in ASCII). The symbol may also refer to:

Art, entertainment, and media

Other uses

See also

References

河南 (disambiguation)

河南 may refer to:

Code (law)

A code is a type of legislation that purports to exhaustively cover a complete system of laws or a particular area of law as it existed at the time the code was enacted, by a process of codification. Though the process and motivations for codification are similar in different common law and civil law systems, their usage is different. In a civil law country, a Code typically exhaustively covers the complete system of law, such as civil law or criminal law. By contrast, in a common law country with legislative practices in the English tradition, a Code is a less common form of legislation, which differs from usual legislation that, when enacted, modify the existing common law only to the extent of its express or implicit provision, but otherwise leaves the common law intact. By contrast, a code entirely replaces the common law in a particular area, leaving the common law inoperative unless and until the code is repealed. In a third case of slightly different usage, in the United States and other common law countries that have adopted similar legislative practices, a Code is a standing body of statute law on a particular area, which is added to, subtracted from, or otherwise modified by individual legislative enactments.

Ten-code

Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in Citizens Band (CB) radio transmissions.

The codes, developed in 1937 and expanded in 1974 by the Association of Public-Safety Communications Officials-International (APCO), allow for brevity and standardization of message traffic. They have historically been widely used by law enforcement officers in North America but due to the lack of standardization, in 2006 the U.S. federal government recommended they be discontinued in favor of everyday language.

History

APCO first proposed Morse code brevity codes in the June, 1935 issue of The APCO Bulletin, which were adapted from the procedure symbols of the U.S. Navy.

The development of the APCO Ten Signals began in 1937, when police radio channels were limited to reduce use of speech on the radio. Credit for inventing the codes goes to Charles "Charlie" Hopper, communications director for the Illinois State Police, District 10 in Pesotum, Illinois. Hopper had been involved in radio for years and realized there was a need to abbreviate transmissions on State Police bands. Experienced radio operators knew the first syllable of a transmission was frequently not understood because of quirks in early electronics technology. Radios in the 1930s were based on vacuum tubes powered by a small motor-generator called a dynamotor. The dynamotor took from 1/10 to 1/4 of a second to "spin up" to full power. Police officers were trained to push the microphone button, then pause briefly before speaking; however, sometimes they would forget to wait. Preceding each code with "ten-" gave the radio transmitter time to reach full power. An APCO Bulletin of January 1940 lists codes assigned as part of standardization;

Code 128

Code 128 is a very high-density barcode symbology. It is used for alphanumeric or numeric-only barcodes. It can encode all 128 characters of ASCII and, by use of an extension character (FNC4), the Latin-1 characters defined in ISO/IEC 8859-1.

GS1-128 (formerly known as UCC/EAN-128) is a subset of Code 128 and is used extensively world wide in shipping and packaging industries as a product identification code for the container and pallet levels in the supply chain. The symbology was formerly defined as ISO/IEC 15417:2007.

Specification

A Code 128 barcode will have six sections:

The check character is calculated from a weighted sum (modulo 103) of all the characters.

Subtypes

Code 128 includes 108 symbols: 103 data symbols, 3 start symbols, and 2 stop symbols. The symbols consist of three black bars and three white spaces. The stop pattern is composed of two overlapped symbols and has four bars. The stop pattern permits bidirectional scanning. When the stop pattern is read left-to-right (the usual case), the stop symbol is recognized. When the stop pattern is read right-to-left, the reverse stop symbol is recognized. A scanner seeing the reverse stop symbol then knows it must read the symbol in reverse. To represent all 128 ASCII values, there are three code sets (A, B, C), which can be mixed within a single barcode (by using codes 98 and 99 in code sets A and B, 100 in code sets A and C and 101 in code sets B and C to switch between them):