The annual growth cycle of grapevines is the process that takes place in the vineyard each year, beginning with bud break in the spring and culminating in leaf fall in autumn followed by winter dormancy. From a winemaking perspective, each step in the process plays a vital role in the development of grapes with ideal characteristics for making wine. Viticulturalists and vineyard managers monitor the effect of climate, vine disease and pests in facilitating or impeding the vines progression from bud break, flowering, fruit set, veraison, harvesting, leaf fall and dormancy-reacting if need be with the use of viticultural practices like canopy management, irrigation, vine training and the use of agrochemicals. The stages of the annual growth cycle usually become observable within the first year of a vine's life. The amount of time spent at each stage of the growth cycle depends on a number of factors-most notably the type of climate (warm or cool) and the characteristics of the grape variety.[1]
Contents |
The grape starts its annual growth cycle in the spring with bud break. In the Northern Hemisphere, this stage begins around March while in the Southern Hemisphere it begins around September when daily temperatures begin to surpass 10 °C (50 °F). If the vine had been pruned during the winter, the start of this cycle is signaled by a "bleeding" of the vine. This bleeding occurs when the soil begins to warm and osmotic forces pushes water, containing a low concentration of organic acids, hormones, minerals and sugars, up from the root system of the vine and it is expelled from the cuts (or "wounds") left over from pruning the vine. During this period a single vine can "bleed" up to 5 litres (1.3 US gal) of water.[2]
Tiny buds on the vine start to swell and eventually shoots begin to grow from the buds. Buds are the small part of the vine that rest between the vine's stem and the petiole (leaf stem). Inside the buds contain usually three primordial[disambiguation needed ] shoots. These buds appear in the summer of previous growth cycle green and covered in scales. During winter dormancy they turn brown until the spring when the vine begins the process of bud break and the first sign of green in the vineyard emerges in the form of tiny shoots.[3] The energy to facilitate this growth comes from reserves of carbohydrate stored in roots and wood of the vine from the last growth cycle. Eventually the shoots sprout tiny leaves that can begin the process of photosynthesis, producing the energy to accelerate growth. In warm climates, after about 4 weeks the growth of the shoots starts to rapidly accelerate with the shoots growing in length an average of 3 cm (1 in) a day.[1]
In temperate climates, where temperatures can reach above 10 °C (50 °F) in mid-winter, some early budding varieties (such as Chardonnay) can be at risk of premature bud break. This is a potential viticultural hazard in places like the Margaret River region of Western Australia where warm currents from the Indian Ocean can coax Chardonnay vines to prematurely bud in the mid-winter month of July. After bud break, the young shoots are very vulnerable to frost damage with vineyard managers going to great lengths protect the fragile shoots should temperature dramatically drop below freezing. This can include setting up heaters or wind circulators in the vineyard to keep cold air from settling on the vines.[3]
Depending on temperatures, 40-80 days after bud break the process of flowering begins with small flower clusters appearing on the tips of the young shoots looking like buttons. Flowering occurs when average daily temperatures stay between 15–20 °C (59–68 °F) which in the Northern Hemisphere wine regions is generally around May and for the Southern Hemisphere regions around November. A few weeks after the initial clusters appears, the flowers start to grow in size with individual flowers becoming observable.[1] It is during this stage of flowering that the pollination and fertilization of the grapevine takes place with the resulting product being a grape berry, containing 1-4 seeds.[4]
Most Vitis vinifera grape vines are hermaphroditic, with both male stamens and female ovaries, being able to self-pollinate. At the beginning of the flowering process the only part that is visible is the fused cap of petals known as the calyptra. Shortly after the calyptra is shed, liberating the pollen from the anthers of the stamen. Wind and insects generally play only a small role in aiding pollination, with the process being mostly self contained within the vine. But cross-pollination between vine species is possible as in the cases of the origins of several grape varieties like Cabernet Sauvignon (a cross pollination of Cabernet Franc and Sauvignon blanc) and Petite Sirah (a cross of Syrah and Peloursin). During the process of fertilization, the pollen fertilizes the ovary which produces seeds as the flower begins the transformation into a grape berry, encapsulating the seed. Detrimental weather (cold, wind & rain) can severely affect the flowering process, causing many flowers not to be fertilize and produce a group.[4] It is during this time when the buds that will become next years crops begin to form.[1]
The stage of fruit set follows flowering almost immediately, when the fertilized flower begins to develop a seed and grape berry to protect the seed. In the Northern Hemisphere, this normally takes place in May and in the Southern Hemisphere in November.[1] This stage is very critical for wine production since it determines the potential crop yield. Not every flower on the vine gets fertilized, with the unfertilized flowers eventually falling off the vine. The percentage of fertilized flowers averages around 30 but can get as high as 60 or be much lower. Climate and the health of the vine play an important role with low humidity, high temperatures and water stress having the potential of severely reducing the amount flowers that get fertilized. Coulure occurs when there is an imbalance of carbohydrate levels in the vine tissues and some berries fail to set or simply fall off the bunch. Varieties like Grenache and Malbec are prone to this abnormal fruit set. Millerandage occurs when some fertilized flowers do not form seeds but only small berry clusters. Grape berry size depends on the number of seeds so berries with no seeds will be significantly smaller than berries containing seeds. On one cluster there may be berries of various sizes which can create problems during winemaking due to the varying "skin to pulp" ratio among the grapes.[5] This can be caused by vine disease, such as fanleaf, or by a boron deficiency in the vine. Gewürztraminer and the Chardonnay clones IA and Mendoza are both prone to millerandage.[6]
Following fruit set, the grape berries are green and hard to the touch. They have very little sugar and are high in organic acids. They begin to grow to about half their final size when they enter the stage of veraison. This stage signals the beginning of the ripening process and normally takes place around 40-50 days after fruit set. In the Northern Hemisphere this will be around the end of July and into August and between the end of January into February for the Southern Hemisphere.[1] During this stage the colors of the grape take form-red/black or yellow/green depending on the grape varieties. This color changing is due to the chlorophyll in the berry skin being replaced by anthocyanins (red wine grapes) and carotenoids (white wine grapes). In a process known as engustment, the berries start to soften as they build up sugars. Within six days of the start of veraison, the berries begin to grow dramatically as they accumulate glucose and fructose and acids begin to fall.[7]
The onset of veraison does not occur uniformly among all berries. Typically the berries and clusters that are most exposed to warmth, on the outer extents of the canopy, undergo veraison first with the berries and clusters closer to the trunk and under the canopy shade undergoing it last. There are some factors in the vineyards that can control the onset of veraison, limited water stress and canopy management that creates a high "fruit to leaf" ratio can encourage veraison. This is because the vine is biologically programmed to channel all its energies and resources into the berries, which houses its seedling offspring, so that they may have a better chance of survival. Conversely, very vigorous wines with lots of leaf shading for photosynthesis and water supply will delay the start of veraison due to the vines energies being directed towards continued shoot growth of new buds. For the production of high quality wine, it is considered ideal to have an earlier veraison. During this period the cane of the vine starts to ripen as well changing from green and springing to brown and hard. The vines begins to divert some of its energy production into its reserves in preparation for its next growth cycle.[7]
In the vineyard, the antepenultimate event is the harvest in which the grapes are removed from the vine and transported to the winery to begin the wine making process. In the Northern Hemisphere this is generally between September and October while in the Southern Hemisphere it is generally between February and April. The time of harvest depends on a variety of factors-most notably the subjective determination of ripeness. As the grape ripens on the vines, sugars and pH increase as acids (such as malic acid) decrease. Tannins and other phenolics also develop which can affect the flavors and aromas in the resulting wine. The threat of detrimental weather and vine diseases (such as grey rot) can also play a role in the time table. The balance of all these factors contributes to when a winemaker or vineyard manager decides that it is time to harvest.[1]
Following the harvest, the vines continues the process of photosynthesis, creating carbohydrate reserves to store in the vine's roots and trunks. It will continue doing this until an appropriate level of reserves have been stored. At that point the chlorophyll in the leaves begin to break down and the leaves change color from green to yellow. Following the first frost the leaves begin to fall as the vine starts to enter its winter dormancy period. The following spring, the cycle begins again.[1]
|
Bloom was the fourth album released by Jeff Coffin, released in 2005. This album was the second album recorded and released with the Mu'tet, a constantly changing group of guest musicians that play with Coffin.
All tracks by Jeff Coffin except were noted
"Bloom" is a song written and performed by Gigolo Aunts. It was first released in fall 1991 as the A-side to a 7" single, backed with "Cope", on the independent Summerville label. After appearing as a track on the October 1992 "Cope" single (Blaze58), it was released again as a single in its own right in January 1993 by Alias Records. In July 1993, it appeared as the lead track of the Full-On Bloom EP and later that year appeared on the Gigolo Aunts' album Flippin' Out. In support of that album, it was released as a promo single in the US in 1994 by RCA/BMG.
US Single (Summerville Records) Catalog Number: N/A (1991) Format: 7" single
US Single (Alias Records) Catalog Number: A-057-S (1993) Format: 7" single
Unité is a mobile network operator in Moldova. Working in CDMA, UMTS and LTE standards.
Communication standard: Unité has a license to work in CDMA standard on frequency of 450 MHz as well as in UMTS standard on frequencies of 2100 MHz and 900 MHz.
Numbering resources:
Unité network codes are:
Internationally they have the form:
Network code:
For CDMA standard: 259 03, where 259 — Mobile Country Code (MCC) for Moldova, and 03 — Mobile Network Code (MNC) for Unité network.
For UMTS standard: 259 05, where 259 — Mobile Country Code (MCC) for Moldova, and 05 — Mobile Network Code (MNC) for Unité network.
Unité began its activity on March 1, 2007 as CDMA operator. On April 1, 2010 Unité launched its own 3.5G network.
Unité offers mobile internet services via CDMA standard under the brand of "Connect" with speeds up to 2.4 Mbit/s and via 3.5G under the brand of "3G Connect" with speeds up to 14.4 Mbit/s
Moldtelecom is 100% shareholder of the operator.
Units of alcohol are used in the United Kingdom (UK) as a measure to quantify the actual alcoholic content within a given volume of an alcoholic beverage, in order to provide guidance on total alcohol consumption.
A number of other countries (including Australia, Canada, New Zealand, and the US) use the concept of a "standard drink", the definition of which varies from country to country, for the same purpose. "Standard drinks" were referred to in the first UK guidelines (1984) that published "safe limits" for drinking, but these were replaced by references to "alcohol units" in the 1987 guidelines and the latter term has been used in all subsequent UK guidance.
One unit of alcohol (UK) is defined as 10 millilitres (8 grams) of pure alcohol. Typical drinks (i.e. typical quantities or servings of common alcoholic beverages) may contain 1–3 units of alcohol.
Containers of alcoholic beverages sold directly to UK consumers are normally labelled to indicate the number of units of alcohol in a typical serving of the beverage (optional) and in the full container (can or bottle), as well as information about responsible drinking. Additionally, the advent of smartphones has led to the creation of apps which report the number of units contained in an alcoholic drink.
Military organization or military organisation is the structuring of the armed forces of a state so as to offer military capability required by the national defense policy. In some countries paramilitary forces are included in a nation's armed forces, though not considered military. Armed forces that are not a part of military or paramilitary organizations, such as insurgent forces, often mimic military organizations, or use ad hoc structures.
Military organization is hierarchical. The use of formalized ranks in a hierarchical structure came into widespread use with the Roman Army. In modern times, executive control, management and administration of military organization is typically undertaken by the government through a government department within the structure of public administration, often known as a Ministry of Defense, Department of Defense, or Department of War. These in turn manage Armed Services that themselves command combat, combat support and service support formations and units.