Formic acid
IUPAC name

Formic acid[1]
Systematic name

Methanoic Acid
Other names

Aminic acid; Formylic acid; Hydrogen carboxylic acid; Hydroxymethanone; Hydroxy(oxo)methane; Metacarbonoic acid; Oxocarbinic acid; Oxomethanol
Identifiers
CAS number 64-18-6 YesY
PubChem 284
ChemSpider 278 YesY
UNII 0YIW783RG1 YesY
DrugBank DB01942
KEGG C00058 YesY
ChEBI CHEBI:30751 YesY
ChEMBL CHEMBL116736 YesY
RTECS number LQ4900000
ATCvet code QP53AG01
Jmol-3D images Image 1
Properties
Molecular formula CH2O2
Molar mass 46.03 g mol−1
Appearance Colorless liquid
Density 1.22 g/mL
Melting point

8.4 °C, 282 K, 47 °F
Boiling point

100.8 °C, 374 K, 213 °F
Solubility in water Miscible
Acidity (pKa) 3.77 [2]
Viscosity 1.57 cP at 26 °C
Structure
Molecular shape Planar
Dipole moment 1.41 D(gas)
Hazards
MSDS External MSDS
R-phrases R10 R35
S-phrases (S1/2) S23 S26 S45
Main hazards Corrosive; irritant;
sensitizer.
NFPA 704
NFPA 704.svg
2
3
1
Flash point 69 °C (156 °F)
Related compounds
Related carboxylic acids Acetic acid
Propionic acid
Related compounds Formaldehyde
Methanol
Supplementary data page
Structure and
properties		 n, εr, etc.
Thermodynamic
data		 Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
 YesY (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Formic acid (also called methanoic acid) is the simplest carboxylic acid. Its chemical formula is HCOOH or HCO2H. It is an important intermediate in chemical synthesis and occurs naturally, most notably in the venom of bee and ant stings. In fact, its name comes from the Latin word for ant, formica, referring to its early isolation by the distillation of ant bodies. Esters, salts, and the anion derived from formic acid are referred to as formates.

Contents

Properties [link]

Formic acid is a colorless liquid having a highly pungent, penetrating odor[3] at room temperature. It is miscible with water and most polar organic solvents, and is somewhat soluble in hydrocarbons. In hydrocarbons and in the vapor phase, it consists of hydrogen-bonded dimers rather than individual molecules.[4][5] Owing to its tendency to hydrogen-bond, gaseous formic acid does not obey the ideal gas law.[5] Solid formic acid (two polymorphs) consists of an effectively endless network of hydrogen-bonded formic acid molecules. This relatively complicated compound also forms a low-boiling azeotrope with water (22.4%) and liquid formic acid also tends to supercool.

Natural occurrence [link]

See also Insect defenses

In nature, it is found in the stings and bites of many insects of the order Hymenoptera, mainly ants. Because of its abundance in their diet, giant anteaters (unlike most mammals) do not produce hydrochloric acid for their gastric acid.[6] Formic acid is a naturally occurring component of the atmosphere due primarily to forest emissions. [7]

Production [link]

In 2009, the worldwide capacity for producing this compound was 720,000 tonnes/annum, with production capacity roughly equally divided between Europe (350,000, mainly in Germany) and Asia (370,000, mainly in China), while production was below 1000 tonnes/annum in all other continents.[8] It is commercially available in solutions of various concentrations between 85 and 99 w/w %.[4] As of 2009, the largest producers are BASF, Kemira and Feicheng Acid Chemicals, with the largest production facilities in Ludwigshafen (200,000 tonnes/annum, BASF, Germany), Oulu (105,000, Kemira, Finland) and Feicheng (100,000, Feicheng, China). 2010 Prices ranged from circa € 650/tonne in Western Europe and $ 1250/tonne in the United States.[8]

From methyl formate and formamide [link]

When methanol and carbon monoxide are combined in the presence of a strong base, the formic acid derivative methyl formate results, according to the chemical equation:[4]

CH3OH + CO → HCO2CH3

In industry, this reaction is performed in the liquid phase at elevated pressure. Typical reaction conditions are 80 °C and 40 atm. The most widely-used base is sodium methoxide. Hydrolysis of the methyl formate produces formic acid:

HCO2CH3 + H2O → HCO2H + CH3OH

Efficient hydrolysis of methyl formate requires a large excess of water. Some routes proceed indirectly by first treating the methyl formate with ammonia to give formamide, which is then hydrolyzed with sulfuric acid:

HCO2CH3 + NH3 → HC(O)NH2 + CH3OH
2 HC(O)NH2 + 2 H2O + H2SO4 → 2HCO2H + (NH4)2SO4

This approach suffers from the need to dispose of the ammonium sulfate byproduct. This problem has led some manufacturers to develop energy efficient means for separating formic acid from the large excess amount of water used in direct hydrolysis. In one of these processes (used by BASF) the formic acid is removed from the water via liquid-liquid extraction with an organic base.

By-product of acetic acid production [link]

A significant amount of formic acid is produced as a byproduct in the manufacture of other chemicals. At one time, acetic acid was produced on a large scale by oxidation of alkanes, via a process that cogenerates significant formic acid. This oxidative route to acetic acid is declining in importance, so that the aforementioned dedicated routes to formic acid have become more important.

Hydrogenation of carbon dioxide [link]

The catalytic hydrogenation of CO2 has long been studied. This reaction can be conducted homogeneously.[9][10]

Laboratory methods [link]

In the laboratory, formic acid can be obtained by heating oxalic acid in glycerol and extraction by steam distillation.[11] Glycerol acts as a catalyst, as the reaction proceeds through a glyceryl oxalate intermediary. If the reaction mixture is heated to higher temperatures, allyl alcohol results. The net reaction is thus:

C2O4H2 → CO2H2 + CO2

Another preparation (which must be performed under a fume hood) is the acid hydrolysis of ethyl isonitrile (C2H5NC) using HCl solution.[12]

C2H5NC + 2 H2O → C2H5NH2 + HCO2H

The isonitrile can be obtained by reacting ethyl amine with chloroform (note that the fume hood is required because of the overpoweringly objectionable odor of the isonitrile).

Uses [link]

A major use of formic acid is as a preservative and antibacterial agent in livestock feed. In Europe, it is applied on silage (including fresh hay) to promote the fermentation of lactic acid and to suppress the formation of butyric acid; it also allows fermentation to occur quickly, and at a lower temperature, reducing the loss of nutritional value.[4] Formic acid arrests certain decay processes and causes the feed to retain its nutritive value longer, and so it is widely used to preserve winter feed for cattle.[citation needed] In the poultry industry, it is sometimes added to feed to kill E. coli bacteria.[13][14] Use as preservative for silage and (other) animal feed constituted 30% of the global consumption in 2009.[8]

Formic acid is also significantly used in the production of leather -incl. tanning- (23% of the global consumption in 2009[8]) and in dyeing and finishing of textile (9% of the global consumption in 2009[8]) because of its acidic nature. Use as a coagulant in the production of rubber[4] constituted in 2009 6% of the global consumption.[8]

Formic acid is also used in place of mineral acids for various cleaning products,[4] such as limescale remover and toilet bowl cleaner. Some formate esters are artificial flavorings or perfumes. Beekeepers use formic acid as a miticide against the tracheal mite (Acarapis woodi) and the Varroa mite.[15] The use of formic acid in fuel cells is also under investigation.[16]

Laboratory use [link]

Formic acid is a source for a formyl group for example in the formylation of methylaniline to N-methylformanilide in toluene.[17] In synthetic organic chemistry, formic acid is often used as a source of hydride ion. The Eschweiler-Clarke reaction and the Leuckart-Wallach reaction are examples of this application. It, or more commonly its azeotrope with triethylamine, is also used as a source of hydrogen in transfer hydrogenation.

Like acetic acid and trifluoroacetic acid, formic acid is commonly used as a volatile pH modifier in HPLC and capillary electrophoresis.

As mentioned below, formic acid may serve as a convenient source of carbon monoxide by being readily decomposed by sulfuric acid.

Reactions [link]

Formic acid shares most of the chemical properties of other carboxylic acids. Reflecting its high acidity, its solutions in alcohols form esters spontaneously. Formic acid shares some of the reducing properties of aldehydes, reducing solutions of gold, silver, and platinum to the metals.

Decomposition [link]

Heat and especially acids cause formic acid to decompose to carbon monoxide (CO) and water (dehydration). Treatment of formic acid with sulfuric acid is a convenient laboratory source of CO.[18][19]

In the presence of platinum, it decomposes with a release of hydrogen and carbon dioxide. Soluble ruthenium catalysts are also effective.[20][21] Carbon monoxide free hydrogen has been generated in a very wide pressure range (1-600 bar).[20] Formic acid has even been considered as a material for hydrogen storage.[22] The co-product of this decomposition, carbon dioxide, can be rehydrogenated back to formic acid in a second step. Formic acid contains 53 g L−1 hydrogen at room temperature and atmospheric pressure, which is twice as much as compressed hydrogen gas can attain at 350 bar pressure. Pure formic acid is a liquid with a flash point - ignition temperature of + 69 °C, much higher than that of gasoline (– 40 °C) or ethanol (+ 13 °C).

Addition to alkenes [link]

Formic acid is unique among the carboxylic acids in its ability to participate in addition reactions with alkenes. Formic acids and alkenes readily react to form formate esters. In the presence of certain acids, including sulfuric and hydrofluoric acids, however, a variant of the Koch reaction occurs instead, and formic acid adds to the alkene to produce a larger carboxylic acid.

Formic acid anhydride [link]

An unstable formic anhydride, H(C=O)-O-(C=O)H, can be obtained by dehydration of formic acid with N,N'-Dicyclohexylcarbodiimide in ether at low temperature.[23]

History [link]

Some alchemists and naturalists were aware that ant hills give off an acidic vapor as early as the 15th century. The first person to describe the isolation of this substance (by the distillation of large numbers of ants) was the English naturalist John Ray, in 1671.[24][25] Ants secrete the formic acid for attack and defense purposes. Formic acid was first synthesized from hydrocyanic acid by the French chemist Joseph Gay-Lussac. In 1855, another French chemist, Marcellin Berthelot, developed a synthesis from carbon monoxide that is similar to that used today.

Formic acid was long considered a chemical compound of only minor interest in the chemical industry. In the late 1960s, however, significant quantities of it became available as a byproduct of acetic acid production. It now finds increasing use as a preservative and antibacterial in livestock feed.

Safety [link]

Formic acid has low toxicity (hence its use as a food additive), with an LD50 of 1.8 g/kg (oral, mice). The concentrated acid is, however, corrosive to the skin.[4]

Formic acid is readily metabolized and eliminated by the body. Nonetheless, it has specific toxic effects; the formic acid and formaldehyde produced as metabolites of methanol are responsible for the optic nerve damage, causing blindness seen in methanol poisoning.[26] Some chronic effects of formic acid exposure have been documented. Some experiments on bacterial species have demonstrated it to be a mutagen.[27] Chronic exposure to humans may cause kidney damage.[27] Another effect of chronic exposure is development of a skin allergy that manifests upon re-exposure to the chemical.

Concentrated formic acid slowly decomposes to carbon monoxide and water, leading to pressure buildup in the container it is kept in. For this reason, 98% formic acid is shipped in plastic bottles with self-venting caps.

The hazards of solutions of formic acid depend on the concentration. The following table lists the EU classification of formic acid solutions:

Concentration (weight percent) Classification R-Phrases
2%–10% Irritant (Xi) R36/38
10%–90% Corrosive (C) R34
>90% Corrosive (C) R35

An assay for formic acid in body fluids, designed for determination of formate after methanol poisoning, is based on the reaction of formate with bacterial formate dehydrogenase.[28]

Formic acid in 85% concentration is not flammable, and diluted formic acid is on the US Food and Drug Administration list of food additives.[29] The principal danger from formic acid is from skin or eye contact with the concentrated liquid or vapors. The US OSHA Permissible Exposure Level (PEL) of formic acid vapor in the work environment is 5 parts per million parts of air (ppm).

See also [link]

References [link]

  1. ^ PubChem 284
  2. ^ Brown, H. C. et al., in Braude, E. A. and Nachod, F. C., Determination of Organic Structures by Physical Methods, Academic Press, New York, 1955.
  3. ^ OSHA description.
  4. ^ a b c d e f g Werner Reutemann and Heinz Kieczka “Formic Acid” in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a12_013
  5. ^ a b Roman M. Balabin (2009). "Polar (Acyclic) Isomer of Formic Acid Dimer: Gas-Phase Raman Spectroscopy Study and Thermodynamic Parameters". J. Phys. Chem. A 113 (17): 4910–8. DOI:10.1021/jp9002643. PMID 19344174. 
  6. ^ ANTEATERS at the Natural History Collection of the University of Edinburgh
  7. ^ New study confirms that nature is responsible for 90% of the Earth's atmospheric acidity – wattsupwiththat.com
  8. ^ a b c d e f S.N. Bizzari and M. Blagoev (june 2010). "CEH Marketing Research Report: FORMIC ACID". Chemical Economics Handbook. SRI consulting. https://www.sriconsulting.com/CEH/Public/Reports/659.2000/. Retrieved July 2011. 
  9. ^ P. G. Jessop, in Handbook of Homogeneous Hydrogenation (Eds.: J. G. de Vries, C. J. Elsevier), Wiley-VCH, Weinheim, Germany, 2007, pp. 489–511.
  10. ^ P. G. Jessop, F. Joó, C.-C. Tai (2004). "Recent advances in the homogeneous hydrogenation of carbon dioxide". Coord. Chem. Rev. 248 (21–24): 2425. DOI:10.1016/j.ccr.2004.05.019. 
  11. ^ Chattaway, F. D. (1914). "Interaction of glycerol and oxalic acid". Journal of the Chemical Society, Transactions 105: 151–156. DOI:10.1039/CT9140500151.  Available at HathiTrust.
  12. ^ Cohen, Julius B.: Practical Organic Chemistry MacMillan 1930
  13. ^ Griggs, J. P.; J (2005). "Alternatives to Antibiotics for Organic Poultry Production". The Journal of Applied Poultry Research 14 (4): 750. https://japr.fass.org/cgi/content/abstract/14/4/750. 
  14. ^ Garcia, V.; Catala-Gregori, P.; Hernandez, F.; Megias, M. D.; Madrid, J. (2007). "Effect of Formic Acid and Plant Extracts on Growth, Nutrient Digestibility, Intestine Mucosa Morphology, and Meat Yield of Broilers". The Journal of Applied Poultry Research 16 (4): 555. DOI:10.3382/japr.2006-00116. https://japr.fass.org/cgi/content/full/16/4/555. 
  15. ^ https://www.biobees.com/library/pesticides_GM_threats/miticides_varroa_acarapis.pdf
  16. ^ S. Ha, R. Larsen, and R. I. Masel, "Performance characterization of Pd/C nanocatalyst for direct formic acid fuel cells," Journal of Power Sources, 144, 28-34 (2005)
  17. ^ L. F. Fieser and J. E. Jones (1955), "N-Methylformanilide", Org. Synth., https://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3p0590 ; Coll. Vol. 3: 590 
  18. ^ Koch, H.; Haaf, W. (1973), "1-Adamantanecarboxylic Acid", Org. Synth., https://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv5p0020 ; Coll. Vol. 5: 20 
  19. ^ G. H. Coleman, David Craig (1943), "p-Tolualdehyde", Org. Synth., https://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv2p0583 ; Coll. Vol. 2: 583 
  20. ^ a b C. Fellay, P. J. Dyson, G. Laurenczy (2008). "A Viable Hydrogen-Storage System Based On Selective Formic Acid Decomposition with a Ruthenium Catalyst". Angew. Chem. Int. Ed. 47 (21): 3966–3970. DOI:10.1002/anie.200800320. PMID 18393267. 
  21. ^ G. Laurenczy, C. Fellay, P. J. Dyson, Hydrogen production from formic acid. PCT Int. Appl. (2008), 36pp. CODEN: PIXXD2 WO 2008047312 A1 20080424 AN 2008:502691
  22. ^ Joó, Ferenc (2008). "Breakthroughs in Hydrogen Storage-Formic Acid as a Sustainable Storage Material for Hydrogen". ChemSusChem 1 (10): 805–8. DOI:10.1002/cssc.200800133. PMID 18781551. 
  23. ^ G. Wu, S. Shlykov, F. S. Van Alseny, H. J. Geise, E. Sluyts, B. J. Van der Veken (1995), Formic Anhydride in the Gas Phase, Studied by Electron Diffraction and Microwave and Infrared Spectroscopy, Supplemented with Ab-Initio Calculations of Geometries and Force Fields. J. Phys. Chem., volume 99, issue 21, pages 8589–8598 doi:10.1021/j100021a022
  24. ^ Wray, J. (1670). "Extract of a Letter, Written by Mr. John Wray to the Publisher January 13. 1670. Concerning Some Un-Common Observations and Experiments Made with an Acid Juyce to be Found in Ants". Philosophical Transactions of the Royal Society of London 5 (57–68): 2063. DOI:10.1098/rstl.1670.0052. 
  25. ^ Johnson, W. B (1803). History of the process and present state of animal chemistry. https://books.google.de/books?id=i1eS9LAe3PsC&pg=PA51. 
  26. ^ "Methanol and Blindness". Ask A Scientist, Chemistry Archive. https://www.newton.dep.anl.gov/askasci/chem03/chem03561.htm. Retrieved 22 May 2007. 
  27. ^ a b "Occupational Safety and Health Guideline for Formic Acid". OSHA. https://www.osha.gov/SLTC/healthguidelines/formicacid/recognition.html. Retrieved 28 May 2011. 
  28. ^ Makar AB, McMartin KE, Palese M, Tephly TR (1975). "Formate assay in body fluids: application in methanol poisoning". Biochem Med 13 (2): 117–26. DOI:10.1016/0006-2944(75)90147-7. PMID 1. 
  29. ^ US Code of Federal Regulations: 21 CFR 186.1316, 21 CFR 172.515

External links [link]

Wikimedia Commons has media related to: Formic acid


https://wn.com/Formic_acid

Formic acid (data page)

This page provides supplementary chemical data on formic acid.

Material Safety Data Sheet

The handling of this chemical may incur notable safety precautions. It is highly recommend that you seek the Material Safety Datasheet (MSDS) for this chemical from a reliable source and follow its directions.

  • MSDS from FLUKA in the SDSdata.org database
  • Science Stuff

    • Structure and properties

    Thermodynamic properties

    Vapor pressure of liquid

    Table data obtained from CRC Handbook of Chemistry and Physics, 44th ed. The "(s)" notation indicates temperature of solid/vapor equilibrium. Otherwise the data is temperature of liquid/vapor equilibrium.

    Distillation data

    Spectral data

    Safety data

    References

  • ↑ Morrison, Robert Thornton and Boyd, Robert Neilson, Organic Chemistry, 2nd ed. Allyn and Bacon 1972, p 596
  • ↑ Lange's Handbook of Chemistry, 10th ed. pp 1669-1674
  • ↑ Thornton Schnabel, Marfa Cortada, Jadran Vrabec, Santiago Lago, Hans Hasse. "Molecular Model for Formic Acid adusted to Vapor-Liquid Equilibrium" (PDF). Insitut für Technische Thermodynamik und Thermische Verfahrenstechnik (Institute for Technical Thermodynamic and Thermal Process Engineering), Universität Stuttgart. Retrieved 3 May 2007.
    • Read more
    This page contains text from Wikipedia, the Free Encyclopedia - https://wn.com/Formic_acid_(data_page)

    Podcasts:

    Email this Page Play all in Full Screen Show More Related Videos
    PLAYLIST TIME:

    New World - EP

    by: Back-on

    "Make Some Noise"
    It's easy to feel like You're all alone To feel like nobody knows The great that you are The good that's inside you Is trying so hard to break through
    Maybe it's your time to lift off and fly You won't know if you never try I will be there with you all of the way You'll be fine
    [Chorus] Don't let anyone Tell you that you're not strong enough Don't give up There's nothing wrong with just being yourself That's more than enough So come on and raise your voice speak your mind and make some noise And sing Hey, hey Make some noise Hey, hey, yeah
    You want to be known You want to be heard And know you are beautiful You have so much to give Some change you wanna live So shout it out and let it show
    You have a diamond inside of your heart A light that shines bright as the stars Don't be afraid to be all that you are You'll be fine
    [Chorus] Don't let anyone Tell you that you're not strong enough Don't give up There's nothing wrong with just being yourself That's more than enough So come on and raise your voice speak your mind and make some noise And sing Hey, hey Make some noise Hey, hey, yeah
    [Bridge] You can't just sit back and watch the world change What matters is what you've got to say There's no one else who can stand in your place So come on it's never too late
    Maybe it's your time to lift off and fly You won't know if you never try
    [Chorus] Don't let anyone Tell you that you're not strong enough Don't give up There's nothing wrong with just being yourself That's more than enough So come on and raise your voice speak your mind and make some noise And sing Hey, hey Make some noise Hey, hey, yeah Hey, hey (Make some noise) speak your mind and make some noise And sing hey, yeah Hey, yeah Hey, yeah Make some noise Hey, yeah Hey, yeah Hey, yeah Make some noise Hey, yeah Hey, yeah Hey, yeah Make some noise Hey, yeah Hey, yeah Hey, yeah Make some noise




    ×
    ×
    ×
    ×