M45 Quadmount

The M45 Quadmount (nicknamed the "meat chopper" and "Krautmower" for its high rate of fire) was a weapon mounting consisting of four of the "HB", or "heavy barrel" .50 caliber M2 Browning machine guns (of the M2 Turret Type (TT) variant) mounted in pairs on each side of an open, electrically powered turret. It was developed by the W. L. Maxson Corporation to replace the earlier M33 twin mount (also from Maxson). Although designed as an anti-aircraft weapon, it was also used against ground targets. Introduced in 1943 during World War II, it remained in US service as late as the Vietnam War.

History

In order to develop a mobile anti-aircraft weapon, several 0.5 inch (12.7 mm) twin machine gun mounts were tested on the chassis of the M2 half-track including Bendix, Martin Aircraft Company, and Maxson. The Maxson M33 turret mount was preferred and - on the larger M3 half-track (T1E2) - was accepted for service in 1942 as the M13 Multiple Gun Motor Carriage. The mount was also used on the similar M5 half track as the M14 Multiple Gun Motor Carriage.

Backë

Backë is a village in the former municipality of Potom in Berat County, Albania. At the 2015 local government reform it became part of the municipality Skrapar.

References

Defender (association football)

In the sport of association football, a defender is an outfield player whose primary role is to prevent the opposing team from scoring goals.

There are four types of defenders: centre-back, sweeper, full-back, and wing-back. The centre-back and full-back positions are essential in most modern formations. The sweeper and wing-back roles are more specialised for certain formations.

Centre-back

A centre-back (also known as a central defender or centre-half) defends in the area directly in front of the goal, and tries to prevent opposing players, particularly centre-forwards, from scoring. Centre-backs accomplish this by blocking shots, tackling, intercepting passes, contesting headers and marking forwards to discourage the opposing team from passing to them.

With the ball, centre-backs are generally expected to make short and simple passes to their teammates, or to kick unaimed long balls down the field. For example, a clearance is a long unaimed kick intended to move the ball as far as possible from the defender's goal.

Back (album)

Back is the name of a studio album by country music singer Lynn Anderson, released in 1983.

This album was Anderson's first in three years. She had since been in brief retirement to start a family with her second (and now ex-husband), Harold "Spook Stream", and raise her other children. Thus, Anderson left her old record company (Columbia) in 1980. In 1983, Anderson decided to record again and release a comeback album, as the title "Back" implied. The album brought Anderson back into the country market, along with a few more hits under her belt.

Three singles were released from this album, all in 1983. The first, "You Can't Lose What You Never Had", just missed the Country Top 40 at No. 42. The next single, "What I've Learned From Loving You", peaked at No. 18 on the Billboard country charts. The third and final single, "You're Welcome to Tonight", was a duet with 1980s country star Gary Morris and the album's most successful single. The single reached the Top 10 on the Billboard country charts in early 1984, peaking at No. 9. The album reached No. 61 on the "Top Country Albums" chart in 1983.

Plane (tool)

A hand plane is a tool for shaping wood. When powered by electricity, the tool may be called a planer. Planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber. Planing is used to produce horizontal, vertical, or inclined flat surfaces on workpieces usually too large for shaping. Special types of planes are designed to cut joints or decorative mouldings.

Hand planes are generally the combination of a cutting edge, such as a sharpened metal plate, attached to a firm body, that when moved over a wood surface, take up relatively uniform shavings, by nature of the body riding on the 'high spots' in the wood, and also by providing a relatively constant angle to the cutting edge, render the planed surface very smooth. A cutter which extends below the bottom surface, or sole, of the plane slices off shavings of wood. A large, flat sole on a plane guides the cutter to remove only the highest parts of an imperfect surface, until, after several passes, the surface is flat and smooth. When used for flattening, bench planes with longer soles are preferred for boards with longer longitudinal dimensions. A longer sole registers against a greater portion of the board's face or edge surface which leads to a more consistently flat surface or straighter edge. Conversely, using a smaller plane allows for more localized low or high spots to remain.

Characters of Chrono Trigger

This is a listing of notable characters from the video game Chrono Trigger, a role-playing video game released in 1995 by Square Co. (now Square Enix) for the Super Nintendo Entertainment System video game console. In keeping with the time travel theme of the game's storyline, the characters hail from different eras of a fictional history, ranging from prehistoric times to a post-apocalyptic future.

Creation and influences

The characters of Chrono Trigger were designed by Akira Toriyama based on sketches from the story planner Masato Kato. The development team wanted a diverse cast to reflect the various eras visited by the player; while working on the in-battle actions of the game, they decided to include a playable character that was neither human nor robot. Kato drew sketches for a cast of eight playable characters, comprising a male protagonist, the daughter of a fairy king, a tin robot, a monster man, an inventor girl, a demon king, a primitive girl, and an old sage. Pig and monkey characters were also considered. Six of the initial ideas were reworked by Toriyama, while the old sage character was scrapped and the monster man replaced with Toriyama's own frog man design.

Bow frog

The bow frog is the end part of a stringed musical instrument's bow that encloses the mechanism responsible for tightening and holding the bow hair ribbon. Most of the bow frogs used in today's classical bows are made of ebony; some synthetic bows have frogs made with materials that imitate ebony, while Baroque bows use frogs made with various woods.

Etymology and names

The origin of the name frog is unknown, although it may derive from the use of the frock, the small device that bow makers use to shape it. It is also referred to as the "heel" or "nut" of the bow. The German equivalent Frosch is the literal equivalent of "frog," while in French and Italian the equivalent of "claw" is used (talon and tallone). French also uses hausse. The foreign language terms sometimes appear in musical instructions, such as au talon, indicating to play with the bow near the frog. However, the English term is also used, such as in the Alfred edition of George Gershwin's An American in Paris, in which the violins and violas are instructed to play "near the frog" at bar 32.