24-bit

In computer architecture, 24-bit integers, memory addresses, or other data units are those that are at most 24 bits (3 octets) wide. Also, 24-bit CPU and ALU architectures are those that are based on registers, address buses, or data buses of that size.

Notable 24-bit machines include the SDS 930 and SDS 940, the ICT 1900 series, and the Datacraft minicomputers/Harris H series.

The IBM System/360, announced in 1964, was a popular computer system with 24-bit addressing and 32-bit general registers and arithmetic. The early 1980s saw the first popular personal computers, including the IBM PC/AT with an Intel 80286 processor using 24-bit addressing and 16-bit general registers and arithmetic, and the Apple Macintosh 128K with a Motorola 68000 processor featuring 24-bit addressing and 32-bit registers.

The eZ80 is a microprocessor and microcontroller family, with 24-bit registers and therefore 24-bit linear addressing, that is binary compatible with the 8/16-bit Z80.

The 65816 is a microprocessor and microcontroller family with 16-bit registers and 24-bit bank switched addressing. It is binary compatible with the 8-bit 6502.

Bit (disambiguation)

A bit is a unit of information storage on a computer.

Bit or BIT may also refer to:

Tools and engineering

Arts and entertainment

Organisations

Education

Crook (music)

A crook, also sometimes called a shank, is an exchangeable segment of tubing in a natural horn (or other brass instrument, such as a natural trumpet) which is used to change the length of the pipe, altering the fundamental pitch and harmonic series which the instrument can sound, and thus the key in which it plays.

Master crook and coupler system

Early horns had unalterable lengths and permanently attached mouthpieces. This presented problems in concert situations. A different horn was required for different keys, and the instrument could not be tuned. Around 1700 the Leichnamschneider brothers in Vienna developed a horn with a removable mouthpiece which could be connected to a short piece of tubing, called a master crook. Additional pieces, couplers, of different length were inserted between the master crook and the body of the horn to change the horn's length, and thus the pitch. Fine tuning was done with even shorter segments called tuning bits. This simple and relatively inexpensive solution remained in use even into the 19th century. Charles Tully's Tutor for the French Horn, published in London, recommended this system for beginners as late as 1840.

Bit (horse)

A bit is a type of horse tack used in equestrian activities, usually made of metal or a synthetic material, and is placed in the mouth of a horse or other equid and assists a rider in communicating with the animal. It rests on the bars of the mouth in an interdental region where there are no teeth. It is held on a horse's head by means of a bridle and has reins attached for use by a rider.

Basic types

Although there are hundreds of design variations, the basic families of bits are defined by the way in which they use or do not use leverage. They include: