.32 NAA

The .32 NAA is a cartridge/firearm 'system' designed and developed by the partnership of North American Arms and Corbon Ammunition. The cartridge is a .380 ACP case necked-down to hold a .32 caliber bullet with the goal of improved ballistic performance over the .32 ACP.

History and Design

Bottleneck handgun cartridge designs experienced early success and have had continuing development since at least the 7.65×25mm Borchardt or earlier, which led to the development of the 7.63×25mm Mauser (also known as the .30 Mauser), followed by the 7.62×25mm Tokarev. The benefits of bottleneck designs include smooth feeding and chambering and simple, robust headspacing.

The .32 NAA uses the .312" diameter bullet of the .32 S&W, .32 S&W Long, .32 H&R Magnum, and .327 Federal Magnum, and .32 ACP.

The .32 NAA is the most recent of a line of commercial bottleneck handgun cartridges. Renewed western interest in bottleneck handgun cartridges began with the .357 SIG in 1994 (necking a .40 S&W case down to a .355 bullet); followed by the .400 Corbon in 1996 (necking a .45 ACP case down to hold a .40 cal. bullet); and then the .25 NAA in 1999 (necking a .32 ACP case down to hold a .25 caliber bullet).

NAA

NAA can refer to:

.25 NAA

The .25 NAA was introduced by North American Arms company for their smaller (height: 1/4" less; length: 1/3" less) and lighter (by approx. 25%) .32 ACP Guardian model. It is a new design based on .32 ACP, but it is a rimless case necked down to accept .251" diameter (.25 ACP) bullets and case is longer than a standard .32 ACP.

History and design

The cartridge was originally conceived and prototyped by gunwriter J.B. Wood and called the 25/32 JBW. North American Arms and Cor-Bon Ammunition then further developed the cartridge and the NAA Guardian .25 NAA pistol combination for production in consultation with Ed Sanow. The finalized cartridge and pistol were introduced at the 2004 SHOT Show.

It followed the successful introduction of two other commercial bottleneck handgun cartridges, the .357 SIG in 1994 (which necked a .40 S&W case down to accept .355 cal. bullets); and the .400 Corbon in 1996 (which necked a .45 ACP case down to accept .40 cal. bullets).

Performance

According to NAA's website, the .25 NAA's 35 gr bullet travels faster (1200 f.p.s.) and hits harder (20% more energy on average) than larger, .32 ACP caliber bullets.

North American NA-64 Yale

The North American NA-64 (NA-64 P-2 or NAA-64 P-2 in French service, Yale in Canadian service) is a low-wing single piston engine monoplane advanced trainer aircraft that was built for the French Armée de l'Air and Aeronavale and served with the Royal Canadian Air Force and Luftwaffe as a captured aircraft or Beuteflugzeug during World War II.

Design and development

Ordered as a follow-on to the NA-57 as a two-seat advanced trainer, the NA-64 P-2/NAA-64 P-2 represented a major structural improvement, with a longer all-metal fuselage replacing the fabric covered fuselage of the NA-57. As well as metal skin replacing the fabric on the fuselage, the fin was changed from having a corrugated skin to being a smooth stressed skin structure and was moved slightly aft, lengthening the rear fuselage while the engine was moved forward to maintain the center of gravity. The rudder was also changed from the rounded shape used previously to one with a roughly triangular shape with the broadest part being at the bottom to improve handling at high angles of attack. In one respect however, it was a step backwards from its immediate predecessor, the BT-14, with which it is often confused, in that the earlier straight wings were used with the result that in RCAF service, when compared to the later and more powerful Harvard II it was flown alongside, it had different handling characteristics and lower performance.