I am actually not sure. I would assume if the original DLS works on Mac, this would too.

I actually put this is my mod. It also comes with a 16x9 screen. https://itch.io/t/3504996/new-dls-update-16x9-screen-display

I actually put this is my mod. It also comes with a 16x9 screen. https://itch.io/t/3504996/new-dls-update-16x9-screen-display

I posted a mod here that has a 16x9 screen. https://www.mediafire.com/file/fn5zp57jdkwfjhp/Tekra_-_Digital_Logic_Sim_1.0.2.z...

There was a change to the Usage.html. If you already downloaded this mod, redownload it for the update.

Digital Logic Sim by Sebastian Lague (modded)

Tekra v1.0.2 (may be updated in the future)

-Added features:

- Added "16x9 SCREEN" chip

- Note: This will not be a built-in chip because it has proven hard to reverse engineer and program that in while also being able to see inside and edit this chip.
- You can build a computer to automatically toggle each of the 144 pixels.
- Please see folder named "DOCUMENTATION" that was included in zip file to see usage.
- You can edit this chip to your heart's content if you so choose.

Known Bugs (please read):

- When viewing a subchip, the workspace is able to load the size of the subchip correctly, however, when you exit the chip to go back to view current chip, the zoom is applied from the subchip to current chip. To fix this, make sure you save your chip before viewing subchips and then load that saved chip if needed or just create the chip again if you havent added too many subchips and wires to remember. Alt+R will not reset zoom properly unless you create a new chip or you edit an already existing chip.

- When you zoom out or in the chip you are editing and don't reset it, and then save, the size of chip will be incorrect when reloading. Resizing and saving should fix it.

- Sometimes when a chip is loaded, the size may be incorrect. Resize chip if necessary.

Once again, HAVE FUN!

Credits

- Sebastian Lague - Creator of project

- NoFood4u - Panning and Zooming

- ChazzWazzle - Resize chip

DOWNLOAD LINK

https://www.mediafire.com/file/fn5zp57jdkwfjhp/Tekra_-_Digital_Logic_Sim_1.0.2.z...

Hey Neutrinos. I did add a silver/white wire as shown in Sebastian's video. But i guess I need brown now, huh? I have updated DLS to have zoom and panning with the help of the community. In the future, I plan to add a 16x9 screen which isnt much, but a start, and then the ability to play sound through a speaker.

(EDIT) I did change the README.html and README.txt and reuploaded. I also changed it in the main post. So you can disregard the following statements unless you have downloaded the mod before I fixed my little oopsy.

One thing to note: The Zoom In and Out and the Resize big and small controls are backwards.

Here are the correct controls. Feel free to change it in your README

- Zoom out and in

      -Alt+1: Zoom out

      -Alt+2: Zoom in

- Resize chip (Note: You CANNOT resize chip unless Panning and Zoom has been reset. Reset using Alt+R.)

      -Alt+Q: Make chip bigger (will appear zoomed out)

      -Alt+E: Make chip smaller(will appear zoomed in)

Can I get this project file?

Currently, Sebastian hasn't made a way. I may make a way for that to happen though in the future. I just finished posting my mod. So I'm not just saying that. Hopefully, Ill add it soon.

Digital Logic Sim by Sebastian Lague (modded)

Tekra v1.0.1 (may be updated in the future)

-Added features:

- Pan workspace with WASD keys (Alt key programmed to prevent conflicting with other controls)

-Alt+W: Pan up
-Alt+A: Pan left
-Alt+S: Pan down
-Alt+D: Pan right

- Zoom out and in

-Alt+1: Zoom out
-Alt+2: Zoom in

- Reset Panning and Zoom

-Alt+R

- Resize chip (Note: You CANNOT resize chip unless Panning and Zoom has been reset. Reset using Alt+R.)

-Alt+Q: Make chip bigger (will appear zoomed out)
-Alt+E: Make chip bigger (will appear zoomed in)

-Added new Save function to save Size of chip. See Resize chip (above)

-Added display on chips named "4-BIT REGISTER" or "DIGIT DISPLAY"

-The display for the chips listed in quotes must have their respective names otherwise the display will NOT be shown.
-The display for "4-BIT REGISTER" or "DIGIT DISPLAY" works best if the number of pins match that of the chip shown in:
https://www.youtube.com/watch?v=hEDQpqhY2MA&list=PLFt_AvWsXl0dPhqVsKt1Ni_46ARyiCGSq&index=3
-Note: Output pins are unnecessary when just displaying a value on display. Putting output pins without connections will NOT automatically transfer input data.

-Added Reset Panning and Zoom function when creating or loading a chip.

-Added Modded by (Insert Name) in Main Menu

-Updated Last Updated text on lower right of Main Menu

-Added "Silver" Color to Pins

-To change color of pins and wires, right click on the tip of the pin and set desired color.

Known Bugs (please read):

- When viewing a subchip, the workspace is able to load the size of the subchip correctly, however, when you exit the chip to go back to view current chip, the zoom is applied from the subchip to current chip. To fix this, make sure you save your chip before viewing subchips and then load that saved chip if needed or just create the chip again if you havent added too many subchips and wires to remember. Alt+R will not reset zoom properly unless you create a new chip or you edit an already existing chip.

- Sometimes when loading a chip, the size will be incorrect. Resizing and saving should fix it.

HAVE FUN!

Download Link:

https://www.mediafire.com/file/y33y5p04cnip2q6/Tekra+-+Digital+Logic+Sim.zip/fil...