Thermal power plant
Appearance
A thermal power plant is a power plant where steam is used to drive a steam turbine. This turbine is connected to an electrical generator. After this, the water is condensed, and may be used again. This is known as the Rankine cycle. There are different procedures that can be used to heat the water;
The main Components of a thermal power plant
[change | change source]- Cooling tower
- Cooling water pump
- transmission line (3-phase)
- Step-up transformer (3-phase)
- Electrical generator (3-phase)
- Low pressure steam turbine
- Condensate pump
- Surface condenser
- Intermediate pressure steam turbine
- Steam Control valve
- High pressure steam turbine
- Deaerator
- Feedwater heater
- Boiler steam drum
- Superheater
- Forced draught (draft) fan
- Reheater
- Combustion air intake
- Induced draught (draft) fan
Main disadvantage of fossil fuel thermal power plant
[change | change source]Fossil fueled thermal power plants produce a large part of man-made CO2 emissions to the atmosphere, and efforts to reduce these are varied and widespread.
- It occupies lot of space and release gases.
Related pages
[change | change source]![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
Wikimedia Commons has media related to Thermal power plants.
- Geothermic power plant
- thermal energy from the oceans
- solar power
- nuclear power plant
- coal and other fossil fuels, such as gas