This paper offers a review of present achievements in the field of processing of ceramic‐based
materials with complex geometry using the main additive manufacturing (AM) …

Besides the excellent high-temperature mechanical properties, Si 3 N 4 and SiC based
ceramics containing insulating or electrically conductive phase are attractive for their tunable …

A powder mixture of alumina and dextrin was used as a precursor material for fabrication of
porous alumina preforms by indirect three-dimensional printing. Post-pressureless infiltration …

In the last two decades, fibre-reinforced SiC ceramic-matrix composites (CMCs) have attracted
extensive interests. Owing to the designable multi-scale microstructure feature and the …

A novel class of preceramic paper may serve as a preform to manufacture lightweight as well
as multilayer ceramic products. In this article, we discuss the formation, microstructure, and …

Novel paper‐derived Ti 3 SiC 2 ‐based ceramics are fabricated by spark plasma sintering (SPS).
A Ti 3 SiC 2 ‐loaded preceramic article is used as feedstock. The sintering temperature …

Hydroxyapatite scaffolds with a multi modal porosity designed for use in tissue engineering
of vascularized bone graft substitutes were prepared by three dimensional printing. …

Limited by the types of suitable absorbents as well as the challenges in engineering the
nanostructures (eg, defects, dipoles, and hetero‐interface) using state‐of‐the‐art additive …

Abstract Design and development of advanced materials for electromagnetic applications
and bringing these materials into use is one of the most challenging tasks of materials …

Since their inception, additive manufacturing (AM) techniques have been the go‐to methods
for obtaining highly complex‐shaped rapid prototypes (RPs) and specialized parts, which …